|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NCP5504, NCV5504 250 mA Dual Output Low Dropout Linear Regulator The NCP5504/NCV5504 are dual output low dropout linear regulators with 2.0% accuracy over the operating temperature range. They feature a fixed output voltage of 3.3 V (contact factory for other fixed output voltage options) and an adjustable output that ranges from 1.25 V to 5.0 V. It is available in a 5 pin DPAK Pb-Free package. The NCP5504/NCV5504 employs an architecture that offers low noise without a bypass capacitor for the fixed output. This device along with a ripple rejection of 75 dB and a dropout of 250 mV @ 250 mA, suits post-regulation and power sensitive battery-operated applications. Features http://onsemi.com DPAK-5 DT SUFFIX CASE 175AA MARKING DIAGRAM * * * * * * * * * * * * * * * * * * * * One Fixed and One Adjustable Output Pin 250 mA Each Output Adjustable Output Voltage from 1.25 V to 5.0 V Low Dropout Voltage of 250 mV typical at 250 mA Low Quiescent Current of 370 mA typical Ripple Rejection of 75 dB Temperature Range of NCP5504 -25C to +85C Temperature Range of NCV5504 -40C to +125C Low Noise Without Bypass Capacitor; 90 mVrms Line Regulation < 15 mV Load Regulation; Vout1 < 15 mV, Vout2 < 10 mV Accuracy of 2% Overtemperature Range Thermal Protection and Current Limit Short Circuit Protection NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes These are Pb-Free Devices 5504G ALYWW Pin 1. Adjust for Vout 2. Vout2 3. GND 4. Vin 5. Vout1 A L Y WW G = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet. Typical Applications Audio Visual Equipment Battery Powered Consumer Products Instrumentation Computing and Networking Applications Automotive Electronics (c) Semiconductor Components Industries, LLC, 2006 1 September, 2006 - Rev. 2 Publication Order Number: NCP5504/D NCP5504, NCV5504 PIN FUNCTION DESCRIPTION Pin No. 1 2 3 4 5 Pin Name Adjust for Vout2 Vout2 GND Vin Vout1 Description This pin is connected to the resistor divider on the output. For a 1.25 V output, connect directly to the Vout2 pin. Adjustable Regulated Output Voltage. Power Supply Ground Positive Power Supply Input Voltage. Fixed Regulated Output Voltage. See selector guide for options. MAXIMUM RATINGS Rating Input Voltage Operating Input Voltage for Power Considerations Output Pin Voltage Adjust Pin Voltage Maximum Junction Temperature NCP5504 NCV5504 Operating Ambient Temperature NCP5504 NCV5504 Package Thermal Resistance Thermal Resistance, Junction-to-Air Thermal Resistance, Junction-to-Case Storage Temperature Range Electrostatic Discharge Sensitivity Human Body Model (HBM) Machine Model (MM) Latchup Performance (JESD78) Positive Negative Symbol Vin Vin Vout Vadj TJ 125 150 TA -25C to +85C -40C to +125C RqJA RqJC Tstg ESD 2000 200 ILatchup 100 100 mA 100 8 -55 to +150 C/W C V C Value 18 9.0 -0.3 to Vin +0.3 -0.3 to Vin +0.3 Unit V V V V C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. http://onsemi.com 2 NCP5504, NCV5504 NCP5504 ELECTRICAL CHARACTERISTICS (Vin = Vout + 1.0 V, where Vout is the larger of Vout1 or Vout2, TA = 25C, unless otherwise noted) Characteristic Output Voltage NCP5504 (TA = -25C to 85C), IO = 250 mA Vout1 Vout2 Adjustable Pin Current Line Regulation (Vout + 1.0 V < Vin < 7.0 V), IO = 250 mA Load Regulation (1.0 mA < IO< 250 mA) for Vout1 Load Regulation (1.0 mA < IO < 250 mA) for Vout2 Dropout Voltage (IO = 250 mA) Ripple Rejection Ratio (IO = 250 mA) 120 Hz 1 kHz Quiescent Current (IO1, IO2 = 0 mA) Fixed Output Noise Voltage (10 Hz - 100 kHz Vout = 3.3 V, IO = 100 mA, CO = 1.0 mF) Ground Current (IO1, IO2 = 250 mA) Thermal Shutdown (Guaranteed by design) Current Limit on Vout1 and Vout2 Iq Vn Ignd TJmax Ilim Iadj Regline Regload VDO RR - - - - - 150 350 75 60 370 90 10 165 450 - - 450 - 20 - - mA mVrms mA C mA Symbol Vout -2% -2% - - - - 3.30 1.25 50 5 10 5 250 +2% +2% 100 15 15 10 400 nA mV mV mV mV dB Min Typ Max Unit V NCV5504 ELECTRICAL CHARACTERISTICS (Vin = Vout + 1.0 V, where Vout is the larger of Vout1 or Vout2, -40C TJ 150C, -40C TA 125C, unless otherwise noted) Characteristic Output Voltage NCV5504, IO = 250 mA Vout1 Vout2 Adjustable Pin Current Line Regulation (Vout + 1.0 V < Vin < 7.0 V), IO = 250 mA Load Regulation (1.0 mA < IO< 250 mA) for Vout1 Load Regulation (1.0 mA < IO < 250 mA) for Vout2 Dropout Voltage (IO = 250 mA) Ripple Rejection Ratio (IO = 250 mA) 120 Hz 1 kHz Quiescent Current (IO1, IO2 = 0 mA) Fixed Output Noise Voltage (10 Hz - 100 kHz Vout = 3.3 V, IO = 100 mA, CO = 1.0 mF) Ground Current (IO1, IO2 = 250 mA) Thermal Shutdown (Guaranteed by design) Current Limit on Vout1 and Vout2 Iq Vn Ignd TJmax Ilim Iadj Regline Regload VDO RR - - - - - 150 320 75 60 370 90 10 165 450 - - 450 - 20 - - mA mVrms mA C mA Symbol Vout -2% -2% - - - - 3.30 1.25 50 5 10 5 250 +2% +2% 100 15 15 10 400 nA mV mV mV mV dB Min Typ Max Unit V http://onsemi.com 3 NCP5504, NCV5504 NCP5504/ NCV5504 Adj Vout2GND Vin Vout1 12345 NCP5504/ NCV5504 Adj Vout2 GND Vin Vout1 12345 Vin Vout1 Vout2 Cout2 Cin Cout1 Vin Cn R2 Cout2 R1 Cin Cout1 Vout1 Vout2 GND GND Figure 1. Application Schematic, Fixed Output Version. Vout1 = 3.3 V, Vout2 = 1.25 V NOTE: Figure 2. Application Schematic, Adjustable Version. Vout1 = 3.3 V, Vout2 = 1.25 V to 5.0 V, Where Vout2 = 1.25 V * (1+R2/R1) Please note that in order to maintain high accuracy on the adjustable output (Vout2), use R1 values < 30 kW in the resistor divider. The recommended capacitor type and values are as follows: Cin (Tantalum or Aluminum Electrolytic) = 4.7 mF to 100 mF Cout1, Cout2 = Low ESR, 1.0 mF to 22 mF Cn = 200 pF to 1.0 nF. http://onsemi.com 4 NCP5504, NCV5504 TYPICAL CHARACTERISTICS 3.30 Vout1, OUTPUT VOLTAGE (V) Vout2, OUTPUT VOLTAGE (V) 3.295 3.29 3.285 3.28 3.275 3.27 3.265 3.26 0 50 100 150 200 250 Iout, OUTPUT CURRENT (mA) Vin = 4.3 V 1.28 1.30 Vin = 4.3 V 1.26 1.24 1.22 1.20 0 50 100 150 200 250 Iout, OUTPUT CURRENT (mA) Figure 3. Output Voltage vs. Output Load Current for Vout1 300 VDO, DROPOUT VOLTAGE (mV) 250 200 150 100 50 0 -40 IGND, GROUND CURRENT (mA) IO1 = 250 mA 16 14 12 10 8 6 4 2 0 -40 Figure 4. Output Voltage vs. Output Load Current for Vout2 IO1 = IO2 = 250 mA -20 0 20 40 60 80 100 120 -20 0 20 40 60 80 100 120 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 5. Dropout Voltage vs. Temperature for Vout1 Figure 6. Ground Current vs. Temperature http://onsemi.com 5 NCP5504, NCV5504 TYPICAL CHARACTERISTICS 500 Ilim, SHORT CIRCUIT LIMIT (mA) -20 0 20 40 60 80 100 120 Iim, SHORT CIRCUIT LIMIT (A) 450 400 350 300 250 200 150 100 50 0 -40 450 400 350 300 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 120 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 7. Short Circuit Current Limit vs. Temperature for Vout1 100 90 RR, RIPPLE REJECTION (dB) 80 70 60 50 40 30 20 10 0 0.1 Vin = 5.0 V Vout1 = 3.3 V Cin = 4.7 mF Cout = 1.0 mF TJ = 25C 1.0 IO = 10 mA RR, RIPPLE REJECTION (dB) 100 90 80 70 60 50 40 30 20 10 0 0.1 Figure 8. Short Circuit Current Limit vs. Temperature for Vout2 IO = 10 mA Vin = 5.0 V Vout2 = 1.25 V Cin = 4.7 mF Cout = 1.0 mF TJ = 25C 1.0 IO = 250 mA IO = 250 mA 10 F, FREQUENCY (kHz) 100 1000 10 F, FREQUENCY (kHz) 100 1000 Figure 9. Ripple Rejection vs. Frequency for Vout1 Figure 10. Ripple Rejection vs. Frequency for Vout2 http://onsemi.com 6 NCP5504, NCV5504 TYPICAL CHARACTERISTICS 600 500 400 300 200 100 0 Vin = 5.0 V Vout1 = 3.3 V IO = 10 mA Cin = 4.7 mF Cout = 4.7 mF TA = 25C Hz) Hz) 600 500 400 300 200 100 0 Vin = 5.0 V Vout1 = 3.3 V IO = 250 mA Cin = 4.7 mF Cout = 4.7 mF TA = 25C NOISE DENSITY (nVrms/ START: 100 Hz STOP: 100 kHz NOISE DENSITY (nVrms/ START: 100 Hz STOP: 100 kHz Figure 11. Noise Density vs. Frequency Figure 12. Noise Density vs. Frequency 300 250 200 150 100 50 0 Vin = 5.0 V Vout2 = 1.25 V IO = 10 mA Cin = 4.7 mF Cout = 4.7 mF TA = 25C Hz) Hz) NOISE DENSITY (nVrms/ 250 200 NOISE DENSITY (nVrms/ 150 Vin = 5.0 V Vout2 = 1.25 V IO = 250 mA Cin = 4.7 mF Cout = 4.7 mF TA = 25C START: 100 Hz STOP: 100 kHz 100 50 START: 100 Hz STOP: 100 kHz 0 Figure 13. Noise Density vs. Frequency Figure 14. Noise Density vs. Frequency http://onsemi.com 7 NCP5504, NCV5504 TYPICAL CHARACTERISTICS Vout 100 mV/Div IO 100 mA/Div IO = 10 mA to 250 mA IO 100 mA/Div Vin = 5.0 V Vout1 = 3.3 V Cin = 4.7 mF Cout = 4.7 mF TA = 25C Vout 100 mV/Div Vin = 5.0 V Vout1 = 3.3 V Cin = 4.7 mF Cout = 4.7 mF TA = 25C IO = 1.0 mA to 250 mA TIME (100 mS/Div) TIME (100 mS/Div) Figure 15. Load Transient Response for Vout1 Figure 16. Load Transient Response for Vout1 Vout 50 mV/Div IO 100 mA/Div IO = 10 mA to 250 mA IO 100 mA/Div Vin = 5.0 V Vout2 = 1.25 V Cin = 4.7 mF Cout = 4.7 mF TA = 25C Vout 50 mV/Div Vin = 5.0 V Vout2 = 1.25 V Cin = 4.7 mF Cout = 4.7 mF TA = 25C IO = 1.0 mA to 250 mA TIME (100 mS/Div) TIME (100 mS/Div) Figure 17. Load Transient Response for Vout2 Figure 18. Load Transient Response for Vout2 Vin 1.0 V/Div DVin = 1.0 V Vout1 = 3.3 V IO = 250 mA Tr = Tf = 1.0 ms Cout = 4.7 mF TA = 25C Vin 1.0 V/Div DVin = 1.0 V Vout2 = 1.25 V IO = 250 mA Tr = Tf = 1.0 ms Cout = 4.7 mF TA = 25C Vout 50 mV/Div TIME (40 mS/Div) Vout 50 mV/Div TIME (40 mS/Div) Figure 19. Line Transient Response for Vout1 Figure 20. Line Transient Response for Vout2 http://onsemi.com 8 NCP5504, NCV5504 APPLICATION INFORMATION Introduction The NCP5504/NCV5504 are high performance dual output, 250 mA linear regulators suitable for post regulation and power sensitive battery-operated applications. They feature 2.0% accuracy over the operating temperature range. With one fixed output voltage at 3.3 V, and one adjustable output voltage ranging from 1.25 V to 5.0 V, the dropout voltage is 250 mV typical. Additional features, such as an architecture that allows for low noise on the fixed output without a bypass capacitor, provides for an attractive LDO solution for audio visual equipment, instrumentation, computing and networking applications, and automotive electronics. It is thermally robust and is offered in a 5 pin DPAK Pb-Free package. Capacitor Selection will reduce device sensitivity and enhance the output transient response time. The PCB layout is very important and in order to obtain the optimal solution, the Vin and GND traces should be sufficiently wide to minimize noise and unstable operation. For the adjustable output pin, Cn ranges from 200 pF and 1.0 nF. The output capacitor range is between 1.0 mF and 22 mF. For PCB layout considerations, place the capacitor close to the output pin and keep the leads short. Adjustable Output Operation The application circuit for the adjustable output version is shown in Figure 2. Vout2 is calculated based on the following equation: Vout2 + 1.25 V * 1 ) R2 R1 The recommended input capacitor types are tantalum and aluminum electrolytic ranging from 4.7 mF to 100 mF. It is especially required if the power source is located more than a few inches from the NCP5504/NCV5504. This capacitor In order to maintain high accuracy on the adjustable output, R1 values should be < 30 kW. ORDERING INFORMATION Device NCP5504DTRKG NCV5504DTRKG Package DPAK (Pb-Free) DPAK (Pb-Free) Shipping 2500 / Tape and Reel 2500 / Tape and Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 9 NCP5504, NCV5504 PACKAGE DIMENSIONS DPAK 5, CENTER LEAD CROP CASE 175AA-01 ISSUE A -T- B V R C E R1 DIM A B C D E F G H J K L R R1 S U V Z SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.020 0.028 0.018 0.023 0.024 0.032 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.045 BSC 0.170 0.190 0.185 0.210 0.025 0.040 0.020 --- 0.035 0.050 0.155 0.170 MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.51 0.71 0.46 0.58 0.61 0.81 4.56 BSC 0.87 1.01 0.46 0.58 2.60 2.89 1.14 BSC 4.32 4.83 4.70 5.33 0.63 1.01 0.51 --- 0.89 1.27 3.93 4.32 S A 1234 5 Z U K F L D G 5 PL J H 0.13 (0.005) M T SOLDERING FOOTPRINT* 6.4 0.252 2.2 0.086 5.8 0.228 0.34 5.36 0.013 0.217 10.6 0.417 0.8 0.031 SCALE 4:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 10 NCP5504/D |
Price & Availability of NCP550406 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |