View M57147AU-01_764403.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HYBRID IC
M57147AU-01
IPM POWER SUPPLY UNIT
DESCRIPTION The M57147AU-01 is an insulated DC-DC converter designed to drive the IPM. 6 outputs can obtain from an input of 140 ~ 380VDC. The terminals between inputs and outputs, and each outputs are insulated. OUTLINE DRAWING
Lot No
1
Dimensions: mm
M57147AU-01 XXXX
36
Pin No
18
50 0.7
19
FEATURES * Input ................................................... 140 ~ 380VDC * Output ................................................ +15V, 50mAX3 +15V, 150mAX1 +12V, 400mAX1 +5V, 300mAX1 * Electrical isolation (between input and outputs) ........................................................... 1500Vrms 1minute * Electrical isolation (between each outputs) ........................................................... 1500Vrms 1minute
82MAX
0.35 0.2
4.5 1.5
80.35
2.54
0.55 0.1 2.54 17=43 (3.41)
APPLICATION Power supply for IPM drive
BLOCK DIAGRAM
18 19
Vo1+ Vo1- Vo2+ Vo2- Vo3+ Vo3- Vo4+ Vo4- Vo5+
Vin+
17 16 20 24
25 29
30 12 34
Vin-
11 10 35 1
2 3
Vo6+
4 5
Vo5,6
Control circuit
1.6 33 MAX
HYBRID IC
M57147AU-01
IPM POWER SUPPLY UNIT
MAXIMUM RATINGS (Ta = 25 C, unless otherwise noted)
Symbol Vin Parameter Input voltage Vo1, Vo2, Vo3 IL Output current Vo4 Vo5 Vo6 No condensation No condensation - Sine wave voltage, 60Hz, 1 minutes Sine wave voltage, 60Hz, 1 minutes Conditions - Ratings 380 50 150 400 300 -10 ~ 70 -20 ~ 85 *10.8 1500 1500 Unit V
mA
Topr Tstg Po Viso1 Viso2
Operating temperature Storage temperature Total output power Electrical isolation between input and outputs Electrical isolation between each outputs
C C W Vrms Vrms
*Refer to Output Power vs.Input Voltage Charactreristics
ELECTRICAL CHARACTERISTICS (Vin= 140 ~ 380V, Ta = 25 C, Unless otherwise noted)
Symbol Vin Vo1 Vo2 Vo3 Vo4 Vo5 Vo6 Output voltage Parameter Input voltage Test Conditions Recommended range Io1 = 5 ~ 50mA, Io2 = Io3 = 5mA, Io4 = 25mA Io5 = 200mA, Io6 = 200mA Io2 = 5 ~ 50mA, Io1 = Io3 = 5mA, Io4 = 25mA Io5 = 200mA, Io6 = 200mA Io3 = 5 ~ 50mA, Io1 = Io2 = 5mA, Io4= 25mA Io5 = 200mA, Io6 = 200mA Io4 = 25 ~ 150mA, Io1 = Io2 = Io3 = 5mA Io5 = 200mA, Io6 = 200mA Io5 = 30 ~ 400mA, Io1 = Io2 = Io3 = 5mA, Io4 = 25mA Io6 = 200mA Io6 = 50 ~ 300mA, Io1 = Io2 = Io3 = 5mA, Io4 = 25mA Io5 = 200mA Vo1 voltage change Io1 = Io2 = Io3 = 50mA, Io4 =150mA, Io5 = 400mA, Io6 = 300mA Vo2 voltage change Io1 = Io2 = Io3 = 50mA, Io4 =150mA, Io5 = 400mA, Io6 = 300mA Vo3 voltage change Io1 = Io2 = Io3 = 50mA, Io4 =150mA, Io5 = 400mA, Io6 = 300mA Vo4 voltage change Io1 = Io2 = Io3 = 50mA, Io4 =150mA, Io5 = 400mA, Io6 = 300mA Vo5 voltage change Io1 = Io2 = Io3 = 50mA, Io4 =150mA, Io5 = 400mA, Io6 = 300mA Vo6 voltage change Io1 = Io2 = Io3 = 50mA, Io4 =150mA, Io5 = 400mA, Io6 = 300mA - 0.1 0.2 - 0.2 0.5 - 0.3 0.5 - 0.3 0.5 V - 0.3 0.5 Limits Min. 140 14 14 14 14 11 4.75 Typ. - 15 15 15 15 12 5.0 Max. 380 16 16 16 16 14 5.25 V Unit V
-
0.3
0.5
Reg-I
Line regulation
HYBRID IC
M57147AU-01
IPM POWER SUPPLY UNIT
ELECTRICAL CHARACTERISTICS (Vin= 140 ~ 380V, Ta = 25 C, unless otherwise noted)
Symbol Parameter Test Conditions Vo1 voltage change Io1 = 5 ~ 50mA, Io2 = Io3 = 50mA, Io4 = 150mA, Io5 = 400mA, Io6 = 300mA, Vin = 300V Vo2 voltage change Io2 = 5 ~ 50mA, Io1 = Io3 = 50mA, Io4 = 150mA, Io5 = 400mA, Io6 = 300mA, Vin = 300V Vo3 voltage change Io3 = 5 ~ 50mA, Io1 = Io2 = 50mA, Io4 = 150mA, Io5 = 400mA, Io6 = 300mA, Vin = 300V Vo4 voltage change Io4 = 25 ~ 150mA, Io1 = Io2 = Io3 = 50mA,, Io5 = 400mA, Io6 = 300mA, Vin = 300V Vo5 voltage change Io5 = 30 ~ 400mA, Io1 = Io2 = Io3 =50mA, Io4 =150mA, Io6 = 300mA, Vin = 300V Vo6 voltage change Io6 = 50 ~ 300mA, Io1 = Io2 = Io3 = 50mA, Efficiency Io4 =150mA, Io5 = 400mA, Vin = 300V Vin = 300V, Po = 10.8W - 1.5 1.8 - 0.4 1.0 Limits Min. - Typ. 0.4 Max. 1.0 Unit
-
0.4
1.0 V
Reg-L
Load regulation
-
0.5
1.0
- 70
0.1 77
0.2 - %
HYBRID IC
M57147AU-01
IPM POWER SUPPLY UNIT
TYPICAL CHARACTERISTICS
VO1+
+
VUP1
AC200~240V VIN+ + VO2- VIN- VO3+
+
VO1- VO2+
+
UP VUPC VVP1
VP VVPC VWP1
VO3- VO5+
WP VWPC
UN VO6+ LOAD LOAD WN VO 5, V VO4+ M57147AU-01 VO4- F0 EX. VN1 PM15/20CT M060(-3) IPM VN
+
AVAILABLE IPM EXAMPLES PM100CVA060 PM150CVA060 PM200CVA060 PM10CSJ060 PM15CSJ060 PM20CSJ060 PM30CSJ060 PM30RSF060 PM100CSA060 PM150CSA060 PM200CSA060 PM50CTK060 PM75CTK060 PM50RSA060 PM75RSA060 PM100RSA060 PM150RSA060 PM50RSK060 PM75RSK060 PM30CTJ060 PM30CTJ060-3 PM15CTM060 PM15CTM060-3 PM20CTM060 PM20CTM060-3
PM75RVA060
IHYBRID IC
M57147AU-01
IPM POWER SUPPLY UNIT FOR SAFETY USING
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production, and in it's reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage. When handling Hics, please note the following cautions. CAUTIONS Packing The materials used in packing Hics can only withstand normal external conditions. When exposed to outside shocks, rain and certain environmental contaminators, the packing materials will deteriorates. Please take care in handling. 1) 2) 3) 4) 5) Don't stack boxes too high. Avoid placing heavy materials on boxes. Boxes must be positioned correctly during transportation to avoid breakage. Don't throw or drop boxes. Keep boxes dry. Avoid rain or snow. Minimal vibration and shock during transportation is desirable.
Carrying
Storage
When storing Hics, please observe the following notices or possible deterioration of their electrical characteristics, risk of solder ability, and external damage may occur. 1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius with humidity at 40 to 60%. 2) Avoid locations where corrosive gasses are generated or where much dust accumulates. 3) Storage cases must be static proof. 4) Avoid putting weight on boxes. When extended storage is necessary, Hics must be kept non-processed. When using Hics which have been stored for more than one year or under severe conditions, be sure to check that the exterior is free from flaw and other damages. To prevent any electrical damages, use Hics within the maximum ratings. The temperature, current, voltage, etc. must not exceed these conditions. To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in inserting leads into the board holes, conforming to the external view for the terminal arrangement.
Extended storage
Maximum ratings Polarity
IHYBRID IC
M57147AU-01
IPM POWER SUPPLY UNIT
Marketing division, Marketing planning department
6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
Keep safety first in your circuit designs! *ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or mishap. Notes r egarding these materials *These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer's application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or third party. *ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. *All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. *ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. *The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. *If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. *Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein.
Nov.2002

▲Up To Search▲

Price & Availability of M57147AU-01

	To Download M57147AU-01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .