View UPG152TA01_733436.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

L, S BAND SPDT GaAs MMIC SWITCH
FEATURES
* WIDE FREQUENCY RANGE: 100 MHz to 2.5 GHz * LOW INSERTION LOSS: 0.5 dB Typical at 2.0 GHz * HIGH P1dB: +30 dBm typ. @ 2 GHz * LOW CONTROL VOLTAGE: +3V or 0V * SUPER SMALL SURFACE MOUNT PACKAGE: SOT-26 * AVAILABLE ON TAPE AND REEL
UPG152TA
INTERNAL BLOCK DIAGRAM
OUT 2
3
4 VCONT2
GND
2
5 IN
DESCRIPTION
The UPG152TA is an L-Band Single Pole Double Throw (SPDT) GaAs MMIC switch developed for digital cellular, cordless, and PCS handset, WLAN, and other RF control applications. The device features low insertion loss, high P1dB, and low voltage operation. It is housed in a super small, lowcost SOT-26 package and is also available on tape-and-reel. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance.
OUT 1
1
6 VCONT1
ELECTRICAL CHARACTERISTICS (TA = 25C, VCONT = 3V/0V)
PART NUMBER PACKAGE OUTLINE SYMBOLS IL ISOL RLIN RLOUT P1dB IIP3 tSW ICONT PARAMETERS AND CONDITIONS Insertion Loss Isolation Input Return Loss Output Return Loss f = 0.1 - 2 GHz f = 2.0 - 2.5 GHz f = 0.1 - 2 GHz f = 2.0 - 2.5 GHz f = 0.1 - 2 GHz f = 0.1 - 2 GHz f = 0.1 - 2 GHz UNITS dB dB dB dB dB dB dBm dBm dBm ns A 20 11 11 27 30 +48 +44 30 5 MIN UPG152TA T06 TYP 0.5 0.8 22 20 MAX 1.0
Input Power at 1 dB Compression
Input IP3 at f = 900 MHz, VCONT = +3 V f = 1900 MHz, VCONT = +3 V Switching Speed Control Current f = 0.1 - 2 GHz f = 0.1 - 2 GHz, VCONT = 3V/0V, no RF signal
California Eastern Laboratories
UPG152TA ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS VCONT 1,2 PIN PTOT TOPT TSTG PARAMETERS Control Voltage 1 and 2 Input Power Total Power Dissipation Operating Case Temperature Storage Temperature UNITS V dBm W C C RATINGS UPG152TA -6.0 to +6.0 2.7|VCONT1-VCONT2|6.0V 31 0.4 -50 to +90 -65 to +150
Note: 1. Operation in excess of any one of these parameters may result in permanent damage.
RECOMMENDED OPERATING CONDITIONS
UPG152TA SYMBOL VCONT VCONT PIN Control Voltage (ON) Control Voltage (OFF) Input Power Level (VCONT = 3V/0V) PARAMETER UNITS V V dBm MIN +2.7 -0.2 TYP +3.0 0 +27 MAX +5.3 +0.2 +29
APPLICATION EXAMPLE (PCS Handset)
RX
DEMOD
I Q
/N SW UPG152TA
PLL
PLL UPC8105GR I
0 Phase Shifter PA UPC8106T 90
TX
Q
UPG152TA TEST CIRCUIT
UPG152TA IN
Zo = 50 51pF VCONT2 = 0V/3V 1000pF 4 6 1000pF VCONT1 = +3V/0V
3 51pF OUT 2 Zo = 50
SWITCH LOGIC TABLE
CONTROL INPUTS (V) VCONT1 0 0 +3 +3 VCONT2 0 +3 0 +3 CONDITION OF OUTPUT PORTS1 OUT1 OFF ON OFF OFF OUT2 OFF OFF ON OFF
Note: 1. Impedance of the output port in the "OFF" state is reflective.
G1B
1 51pF OUT 1 Zo = 50
UPG152TA PIN CONNECTION DIAGRAM
PIN NO. 1 2 3 4 5 6 CONNECTION OUT 1 GND OUT 2 VCONT2 IN VCONT1
2 1
G1B
3
Top View
4 5 6
4 5 6
Bottom View
3 2 1
OUTLINE DIMENSIONS (Units in mm)
UPG152TA PACKAGE OUTLINE T06
+0.2 2.8 -0.3 +0.2 1.5 -0.1
ORDERING INFORMATION
PART NUMBER UPG152TA-E3 QTY 3000/Reel
1.90.2 2 0.95
G1B
2.90.2
3 0.95
4
5
1
6
-0.05 0.3 +0.10
+0.2 1.1 -0.1
0.8
0.130.1
0 to 0.1
All dimensions are typical unless otherwise specified.
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 12/7/2001

▲Up To Search▲

Price & Availability of UPG152TA01

	To Download UPG152TA01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .