 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| J105 / J106 / J107 / JFTJ105 J105 J106 J107 JFTJ105 G D G SOT-223 G S S TO-92 D NOTE: Source & Drain are interchangeable N-Channel Switch This device is designed for analog or digital switching applications where very low On Resistance is mandatory. Sourced from Process 59. Absolute Maximum Ratings* Symbol VDG VGS IGF TJ, Tstg Drain-Gate Voltage Gate-Source Voltage Forward Gate Current TA = 25C unless otherwise noted Parameter Value 25 - 25 10 -55 to +150 Units V V mA C Operating and Storage Junction Temperature Range 5 *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RJC RJA TA = 25C unless otherwise noted Characteristic Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient J105 - 107 625 5.0 125 357 Max JFTJ105 1,000 8.0 125 Units mW mW/C C/W C/W 1997 Fairchild Semiconductor Corporation J105 / J106 / J107 / JFTJ105 N-Channel Switch (continued) Electrical Characteristics Symbol Parameter TA = 25C unless otherwise noted Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)GSS IGSS ID(off) VGS(off) Gate-Source Breakdown Voltage Gate Reverse Current Gate-Source Cutoff Voltage Gate-Source Cutoff Voltage IG = - 10 A, VDS = 0 VGS = - 15 V, VDS = 0 VGS = - 15 V, VDS = 0, TA = 100C VDS = - 5.0 V, VGS = - 10 V VDS = 5.0 V, ID = 1.0 A 105 106 107 - 25 - 3.0 - 200 3.0 - 4.5 - 2.0 - 0.5 - 10 - 6.0 - 4.5 V nA nA nA V V V ON CHARACTERISTICS IDSS Zero-Gate Voltage Drain Current* VDS = 15 V, IGS = 0 VDS 0.1 V, VGS = 0 105 106 107 105 106 107 500 200 100 3.0 6.0 8.0 mA mA mA rDS(on) Drain-Source On Resistance SMALL SIGNAL CHARACTERISTICS Cdg(on) Csg(on) Cdg(off) Csg(off) Drain Gate & Source Gate On Capacitance Drain-Gate Off Capacitance Source-Gate Off Capacitance VDS = 0, VGS = 10 V, f = 1.0 MHz VDS = 0, VGS = 10 V, f = 1.0 MHz VDS = 0, VGS = 10 V, f = 1.0 MHz 160 35 35 pF pF pF *Pulse Test: Pulse Width 300 s, Duty Cycle 2.0% Typical Characteristics Common Drain-Source Characteristics 200 I D - DRAIN CURRENT (mA) I D - DRAIN CURRENT (mA) V =0V GS -1V Common Drain-Source Characteristics 50 V =0V GS T A = + 25 C 0 150 40 30 - 0.1V TYP V = -0.7V GS(OFF) -2V - 0.2V 100 -3V 20 10 0 - 0.3V 50 -4V -5V T A = + 25 C 0 -0.4V - 0.5V TYP V = -5V GS(OFF) 0 0 0.5 1 1.5 VDS - DRAIN-SOURCE VOLTAGE(V) 2 0 1 2 3 4 VDS - DRAIN-SOURCE VOLTAGE(V) 5 J105 / J106 / J107 / JFTJ105 N-Channel Switch (continued) Typical Characteristics (continued) Parameter Interactions ) Capacitance vs Voltage 2,000 f=0.1-1.0MHz 200 r rDS - DRAIN "ON" RESISTANCE ( V 50 20 10 5 2 1 0.1 @ VDS = 5.0V, ID =3nA GS(OFF) I D- DRAIN CURRENT (mA) 100 DS 1,000 I DSS Cis (Crs) - CAPACITANCE (pf) @ VDS=100MV, VGS = 0 C 500 200 100 (V =5V) EI ,5 20 10 5 C HI (V ,5 =0V) r DS 50 20 0.2 0.3 0.5 1 23 5 V GS - GATE CUT OFF VOLTAGE (V) 10 10 1 0 -5 -10 -15 V GS - GATE-SOURCE VOLTAGE (V) -20 --- NORMALIZED RESISTANCE Normalized Drain Resistance vs Bias Voltage - DRAIN "ON" RESISTANCE ( ) 20 10 5 V GS(OFF) @5V, 10uA rDS r DSb = --------------V GS 1 - ---------V On Resistance vs Drain Current V GS =0 V 20 10 5 = - 3.0V GS(OFF) +125 C +125 C +25 C +25 C - 55 C V = - 5.0V GS(OFF) 0 0 0 0 0 GS(OFF) 1 0 0.2 0.4 0.6 0.8 1 V GS / V GS(OFF) NORMALIZED GATE TO SOURCE VOLTAGE (V) -0.5 1 1 2 3 5 10 20 30 I D - DRAIN CURRENT (mA) 50 100 5 r DSb OUTPUT CONDUCTANCE (u mhos) - TRANSCONDUCTANCE (u mhos) Output Conductance vs Drain Current V DG = 5.0V 10V 15V 20V 10V 15V 20V 5.0V 10V 15V 20V 5.0V V r DS Transconductance vs Drain Current V DG = 10.0V T A = +25 0 C T T A A = - 55 C = +25 0 0 0 C f = 1.0 k Hz T = +125 C A GS(OFF) 20 10 -4.0V 20 10 V = - 1.0V GS(OFF) -2.0V 5 T A = +25 -1.0V f = 1.0 K Hz 0 5 V C = - 3.0V GS(OFF) = - 5.0V GS(OFF) V os - g 1 0.1 fs 0.2 0.3 0.5 1 2 3 I D - DRAIN CURRENT (mA) 5 10 1 0.1 g 0.2 0.3 0.5 1 2 3 I D - DRAIN CURRENT (mA) 5 10 J105 / J106 / J107 / JFTJ105 N-Channel Switch (continued) Typical Characteristics (continued) Noise Voltage vs Frequency 20 V DG = 10 V Power Dissipation vs Ambient Temperature 1 PD - POWER DISSIPATION (W) ) SOT-223 0.75 Hz en - NOISE VOLTAGE (nV/ 15 BW = 6.0 Hz @ f = 10Hz, 100 Hz = 0.2f @ f > 1.0 k Hz TO-92 10 I = 1 mA D 0.5 5 ID = 10 mA 0.25 0 0.01 0.03 0.1 0.3 1 3 10 f - FREQUENCY (k Hz) 30 100 0 0 25 50 75 100 TEMPERATURE ( C) 125 150 TO-92 Tape and Reel Data TO-92 Packaging Configuration: Figure 1.0 TAPE and REEL OPTION FSCINT Label sample FAIRCHILD SEMICONDUCTOR CORPORATION LOT: CBVK741B019 HTB:B QTY: 10000 See Fig 2.0 for various Reeling Styles NSID: PN2222N SPEC: D/C1: D9842 SPEC REV: QA REV: B2 FSCINT Label (FSCINT) 5 Reels per Intermediate Box F63TNR Label Customized Label 375mm x 267mm x 375mm Intermediate Box F63TNR Label sample LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2: QTY1: QTY2: QTY: 2000 SPEC: SPEC REV: CPN: N/F: F Customized Label (F63TNR)3 TO-92 TNR/AMMO PACKING INFROMATION Packing Reel Style A E Ammo M P Quantity 2,000 2,000 2,000 2,000 EOL code D26Z D27Z D74Z D75Z AMMO PACK OPTION See Fig 3.0 for 2 Ammo Pack Options Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units FSCINT Label 327mm x 158mm x 135mm Immediate Box Customized Label 5 Ammo boxes per Intermediate Box F63TNR Label 333mm x 231mm x 183mm Intermediate Box Customized Label (TO-92) BULK PACKING INFORMATION EOL CODE J18Z J05Z NO EOL CODE DESCRIPTION TO-18 OPTION STD TO-5 OPTION STD TO-92 STANDARD STRAIGHT FOR: PKG 92, 94 (NON PROELECTRON SERIES), 96 TO-92 STANDARD STRAIGHT FOR: PKG 94 (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98 LEADCLIP DIMENSION NO LEAD CLIP NO LEAD CLIP NO LEADCLIP QUANTITY 2.0 K / BOX 1.5 K / BOX 2.0 K / BOX BULK OPTION See Bulk Packing Information table Anti-static Bubble Sheets FSCINT Label L34Z NO LEADCLIP 2.0 K / BOX 2000 units per EO70 box for std option 114mm x 102mm x 51mm Immediate Box 5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box Customized Label FSCINT Label 10,000 units maximum per intermediate box for std option (c)2001 Fairchild Semiconductor Corporation March 2001, Rev. B1 TO-92 Tape and Reel Data, continued TO-92 Reeling Style Configuration: Figure 2.0 Machine Option "A" (H) Machine Option "E" (J) Style "A", D26Z, D70Z (s/h) Style "E", D27Z, D71Z (s/h) TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM ORDER STYLE D74Z (M) ORDER STYLE D75Z (P) FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP September 1999, Rev. B TO-92 Tape and Reel Data, continued TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0 Hd P Pd b Ha H1 HO d L L1 W1 S WO W2 W t t1 P1 F1 P2 DO ITEM DESCRIPTION PO Base of Package to Lead Bend Component Height Lead Clinch Height Component Base Height Component Alignment ( side/side ) Component Alignment ( front/back ) Component Pitch Feed Hole Pitch Hole Center to First Lead Hole Center to Component Center Lead Spread Lead Thickness Cut Lead Length Taped Lead Length Taped Lead Thickness Carrier Tape Thickness SYMBOL b Ha HO H1 Pd Hd P PO P1 P2 F1/F2 d L L1 t t1 W WO W1 W2 DO S DIMENSION 0.098 (max) 0.928 (+/- 0.025) 0.630 (+/- 0.020) 0.748 (+/- 0.020) 0.040 (max) 0.031 (max) 0.500 (+/- 0.020) 0.500 (+/- 0.008) 0.150 (+0.009, -0.010) 0.247 (+/- 0.007) 0.104 (+/- 0 .010) 0.018 (+0.002, -0.003) 0.429 (max) 0.209 (+0.051, -0.052) 0.032 (+/- 0.006) 0.021 (+/- 0.006) 0.708 (+0.020, -0.019) 0.236 (+/- 0.012) 0.035 (max) 0.360 (+/- 0.025) 0.157 (+0.008, -0.007) 0.004 (max) User Direction of Feed TO-92 Reel Configuration: Figure 5.0 Carrier Tape Width Hold - down Tape Width Hold - down Tape position Feed Hole Position Sprocket Hole Diameter Lead Spring Out Note : All dimensions are in inches. ELECT ROSTATIC SEN SITIVE D EVICES D4 D1 ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM F63TNR Label Customized Label D2 Reel Diameter Arbor Hole Diameter (Standard) (Small Hole) Core Diameter Hub Recess Inner Diameter Hub Recess Depth Flange to Flange Inner Width W1 Hub to Hub Center Width W3 Note: All dimensions are inches D1 D2 D2 D3 D4 W1 W2 W3 13.975 1.160 0.650 3.100 2.700 0.370 1.630 14.025 1.200 0.700 3.300 3.100 0.570 1.690 2.090 W2 D3 July 1999, Rev. A TO-92 Package Dimensions TO-92 (FS PKG Code 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.1977 (c)2000 Fairchild Semiconductor International January 2000, Rev. B SOT-223 Tape and Reel Data SOT-223 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. F63TNR Label Antistatic Cover Tape Static Dissipative Embossed Carrier Tape F852 014 SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code) TNR 2,500 13" Dia 343x64x343 5,000 0.1246 0.7250 D84Z TNR 500 7" Dia 184x187x47 1,000 0.1246 0.1532 F852 014 F852 014 F852 014 SOT-223 Unit Orientation 343mm x 342mm x 64mm Intermediate box for Standard F63TNR Label F63TNR Label 184mm x 184mm x 47mm Pizza Box for D84Z Option F63TNR Label sample LOT: CBVK741B019 FSID: PN2222A QTY: 3000 SPEC: SOT-223 Tape Leader and Trailer Configuration: Figure 2.0 D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F (F63TNR)3 Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 38 empty pockets Leader Tape 500mm minimum or 62 empty pockets (c)2000 Fairchild Semiconductor International September 1999, Rev. B SOT-223 Tape and Reel Data, continued SOT-223 Embossed Carrier Tape Configuration: Figure 3.0 T E1 P0 D0 F K0 Wc B0 E2 W Tc A0 P1 D1 User Direction of Feed Dimensions are in millimeter Pkg type SOT-223 (12mm) A0 6.83 +/-0.10 B0 7.42 +/-0.10 W 12.0 +/-0.3 D0 1.55 +/-0.05 D1 1.50 +/-0.10 E1 1.75 +/-0.10 E2 10.25 min F 5.50 +/-0.05 P1 8.0 +/-0.1 P0 4.0 +/-0.1 K0 1.88 +/-0.10 T 0.292 +/0.0130 Wc 9.5 +/-0.025 Tc 0.06 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum Typical component cavity center line 0.5mm maximum B0 20 deg maximum component rotation 0.5mm maximum Sketch A (Side or Front Sectional View) Component Rotation A0 Sketch B (Top View) Typical component center line Sketch C (Top View) Component lateral movement SOT-223 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max Dim N See detail AA 7" Diameter Option B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size 12mm Reel Option 7" Dia Dim A 7.00 177.8 13.00 330 Dim B 0.059 1.5 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 0.795 20.2 Dim N 5.906 150 7.00 178 Dim W1 0.488 +0.078/-0.000 12.4 +2/0 0.488 +0.078/-0.000 12.4 +2/0 Dim W2 0.724 18.4 0.724 18.4 Dim W3 (LSL-USL) 0.469 - 0.606 11.9 - 15.4 0.469 - 0.606 11.9 - 15.4 12mm 13" Dia July 1999, Rev. B SOT-223 Package Dimensions SOT-223 (FS PKG Code 47) 1:1 Scale 1:1 on letter size paper Part Weight per unit (gram): 0.1246 (c)2000 Fairchild Semiconductor International September 1999, Rev. C TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST DISCLAIMER FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G |
Price & Availability of J10501
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |