View LX550-7620_671782.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LX550 SERIES
Flexible single and multiple outputs
* * * * * * * 550W continuous output power Industry standard footprint, low profile Conducted noise to meet EN55022 class B AC and DC input voltage options in same package Efficiency up to 88% Optional power sharing/VME signals Autoranging input
[ 2 YEAR WARRANTY ]
The LX550 family offers 550 Watts of continuous output power in a low profile industry standard footprint. Cover and fan assembly and over temperature protection are fitted as standard. With two standard single output options, and a flexible standard multiple output, the series can address most power requirements as standard. The design is specifically tailored to allow full flexibility, and modifications to meet customer applications can be implemented with ease. The LX550 AC input series meet the safety requirements of EN60950, VDE0805, UL1950 and CSA C22.2 No. 950. Input conducted noise levels meet the requirements of EN55022 class B. LX550 series power supplies are ideal for use in high power industrial applications and are particularly suitable for front end power systems.
SPECIFICATION
OUTPUT SPECIFICATIONS Voltage adjustability Remote sense Line regulation LL to HL, FL See Note 5 Load regulation (20% to 100% FL) See Note 5 Cross regulation See Note 5 Transient response
All specifications are typical at nominal input, full load at 25C unless otherwise stated INPUT SPECIFICATIONS CONTINUED -8%/+16% 20% 10% Remote OFF Logic 0 on ROF
Vout on singles +5V output on multiple
ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS Single output Multiple: +5V output Multiple: aux. outputs, Single output Multiple: +5V output Multiple: 12, +24 outputs Multiple: -5V output 5A load step on main output Auxiliary outputs 25% di/dt 0.2% 0.2% 0.5% 0.2% 1.0% 2.0% 4.0% 1.0% Conducted emissions Input noise immunity EN55022, EN55011, FCC Class B Line to line 2.5kV, 10s Line to ground 1.5kV, 150s
GENERAL SPECIFICATIONS Hold-up time Efficiency Isolation voltage Switching frequency Approvals and standards Weight ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 7) Operating 0C to +70C Non-operating -25C to +85C 0C to 40C ambient, 550W fan cooled 40C to 70C ambient, Derate linearly fan cooled to 25% full load Peak, (0C to 40C, 550W, same as max. 10s) max. output but allows individual peaks Non-condensing Operating Non-operating Operating 5% to 95% RH 10,000 feet max. 30,000 feet max. Input/output Input/chassis Fixed Safety 110VAC and 230VAC 18ms 82% min. 3000VAC 1500VAC 44kHz EN60950, VDE0805, UL1950 CSA C22.2 No. 950 3.0kg (106oz)
1.0% max. dev. 1ms recovery 0.02%/C 0.04%/C
Temperature coefficient Main/single output Multiple: auxiliary outputs Overvoltage protection Output power limit Main/single output
130% 10% Vout 600W Pout 105% to 120% Iout Yes 0A
Multiples: primary power limited Singles: current foldback All outputs
Shot circuit protection Minimum output current
INPUT SPECIFICATIONS Input voltage range (See Note 6) Input frequency Input surge current Safety ground leakage current 110VAC 230VAC 110VAC, 60Hz 230VAC, 50Hz Autorange fitted as standard Drop-out voltage 98 to 132VAC 190 to 264VAC 98VAC 50Hz/60Hz 16A max. 25A max. 1.6mA 2.5mA Vibration Relative humidity Altitude
5-50Hz, 0.05mm pk-pk 50-100Hz, 0.025mm pk-pk Non-operating 100mm drop on chassis face
PAGE 1
AC/DC POWER SUPPLIES
|
550W AC
550 Watt AC/DC universal input switch mode power supplies
OUTPUT VOLTAGE +5.0V -5.0V -12.0V +12.0V +24.0V 24.0V 48.0V
(4) (4)
OUTPUT CURRENTS MAX
(1)
OUTPUT RIPPLE RMS 0.2% 0.2% 0.2% 0.2% 0.2% 0.1% 0.1% PK-PK 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% LX550-7624 LX550-7617 MODEL NUMBER LX550-7620
PEAK
(2)
60.0A 5.0A 5.0A 10.0A 5.0A 24.0A 12.0A
100.0A 10.0A 10.0A 20.0A 10.0A - -
INPUT CONNECTIONS Pin 1 Pin 2 Pin 3 Earth Neutral Live
Notes:
1 The multiple output LX550 has a continuous output power rating of 550W. The single-output versions have a continuous power output rating of 570W. The LX550 cannot operate without fan cooling. Peak power figures for individual outputs on the multiple output unit are for less than 10 seconds duration. Total output power should not exceed 550W. Fan fitted as standard, see maximum output current specifications. Single output models are adjustable -8%, +16%. A 10% load on the main output is necessary to maintain regulation on the auxiliaries at full load (multiple output model). The input board is fitted with an autorange circuit as standard which automatically senses the input voltage and switches to the appropriate voltage range. Over temperature protection is provided by a thermal switch fitted to the main transformer. After thermal shutdown (90C) the unit must be powered down and the thermal switch must be allowed cool to 70C before power up. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product.
2
OUTPUT CONNECTIONS MULTI O/P 1 2 3 4 5 6 7 8 9 10 11 12 +5VS +5V +5V +5V 0V 0V 0V -5V -12V +12V +24V ROF SINGLE O/P 0VS 0V 0V 0V 0V 0V +V +V +V +V +VS ROF SIGNALS SRS ACF DCF PM PS ROF +VS 0V - - - -
3 4 5 6
7
8
Options
* * DC input models for 24V and 48V operation are detailed on page 170. A signals board is available as an option. To order, add the suffix `-S', see table below.
OPTIONS
None Signals
SUFFIX
-S
EXAMPLE
LX550-7620 LX550-7620-S
OVERLOAD/SHORT CIRCUIT PROTECTION
The overload/short circuit protection mechanisms are different for the single output models and the multiple output model. The single output models will current limit when the output load reaches 105-120% of maximum load during overload or short circuit conditions. The unit will operate in a constant current mode making the single output models suitable for battery charging applications. The multiple output model uses a power limiting function. When the total output power reaches 600W the outputs will foldback to the values detailed below: Foldback Value Output +5V 30A continuous +12V 8A continuous +24V 4A continuous -5V/-12V Protected by 4A Multi FuseTM The outputs will not foldback until the total output power exceeds the maximum power limits. This allows the units to have a peak power capability but it requires that care must be taken not to permanently overload any individual output. The +5V, +12V and +24V outputs are not individually protected and it is recommended that the maximum continuous load does not exceed the value given in the output specifications. The -5V and -12V outputs are individually protected by a 4A Multi FuseTM and the maximum continuous load should not exceed the value given in the output specifications.
SIGNALS (OPTIONAL)
An optional signals board supplies the following VME utility bus signals: ACF (AC Fail) Logic 1 to 0 transition occurs >10ms before outputs fall below 90% of nominal in the event of input failure. DCF (DC Fail) Logic 0 occurs if output falls below <85%-95% of nominal. SRS (System Reset) Logic 1 for system OK (AC and DC good and reset times [200ms]) PM Power Monitor signal, proportional to the output power, ratio of 10mV/W. PS Power Share connections, to be joined for parallel operation of two or more units, ensuring equal power share. For power share operation unit outputs need to be set to 5% of each other and should be connected in star configurations with the load as star centre.
http://www.artesyn.com
PAGE 2
AC/DC POWER SUPPLIES
|
550W AC
550 Watt AC/DC universal input switch mode power supplies
Mechanical Notes
A Input and output connectors are 15 way terminal block, 5mm pitch. 3 way and 11 way 9.5mm barrier strip with M4 x 8 fixings, 250V 20A. Signals board connector is 8 way, single row right angle 0.1", Molex 910210128, this mates with 90147 1108 or equivalent. B Customer fixing screws (A) are M3 isometric. They must not penetrate into unit by more than 5mm.
120 mm FAN + FANGUARD
INPUT
12 3 45 SYSTEM O. K. LED
SIGNALS
1 12 8
OUTPUT
12 3456 7 8 9 10 11
11.81 (300)
A
A
7.48 (190)
.28 (7)
A
A
1.18 (30)
1.18 (30) .71 (18)
9.45 (240)
10.39 (264)
A 2.48 (63)
A
A
2.44 (62)
A
1.54 (39)
120 mm FAN + FANGUARD
ALL DIMENSIONS IN INCHES (mm)
DERATING CURVE (See Note 3, 4)
Output Power (Watts)
550W
FORCED AIR COOLING
International Safety Standard Approvals:
Multiple output and 24V Single output units are approved to these standards. Safety approval pending for 48V output model.
137.5W
EN60950/VDE0805 Reg. File No. 90370 UL1950 File No. E136005
0W 0C 10C 20C 30C 40C 50C 60C 70C
CSA C22.2 No. 950 File No. LR41062C/LR101320
PAGE 3
(22.5) (20)
.89
.79
5.12 (130)
DS_LX550AC_19980401.PDF
Data Sheet (c) Artesyn Technologies(R) 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
http://www.artesyn.com
PAGE 4

▲Up To Search▲

Price & Availability of LX550-7620

	To Download LX550-7620 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .