View BFR183F_650641.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BFR183F
NPN Silicon RF Transistor* * For low noise, high-gain broadband amplifiers at collector currents from 2 mA to 30 mA * fT = 8 GHz, F = 0.9 dB at 900 MHz * Short term description
3 1 2
ESD (Electrostatic discharge) sensitive device, observe handling precaution!
Type BFR183F
Maximum Ratings Parameter Collector-emitter voltage Collector-emitter voltage Collector-base voltage Emitter-base voltage Collector current Base current Total power dissipation1) TS 62 C Junction temperature Ambient temperature Storage temperature Thermal Resistance Parameter Junction - soldering point 2)
1T S
Marking RHs
1=B
Pin Configuration 2=E 3=C
Package TSFP-3
Symbol VCEO VCES VCBO VEBO IC IB Ptot Tj TA T stg Symbol RthJS
Value 12 20 20 2 65 5 450 150 -65 ... 150 -65 ... 150 Value 195
Unit V
mA mW C
Unit K/W
is measured on the collector lead at the soldering point to the pcb
2For calculation of R thJA please refer to Application Note Thermal Resistance
1
2005-10-14
BFR183F
Electrical Characteristics at TA = 25C, unless otherwise specified Parameter DC Characteristics Collector-emitter breakdown voltage IC = 1 mA, I B = 0 Collector-emitter cutoff current VCE = 20 V, VBE = 0 Collector-base cutoff current VCB = 10 V, I E = 0 Emitter-base cutoff current VEB = 1 V, IC = 0 DC current gainIC = 15 mA, VCE = 8 V, pulse measured hFE 70 100 140 IEBO 1 A ICBO 100 nA ICES 100 A V(BR)CEO 12 V Symbol min. Values typ. max. Unit
2
2005-10-14
BFR183F
Electrical Characteristics at TA = 25C, unless otherwise specified Symbol Values Unit Parameter min. typ. max. AC Characteristics (verified by random sampling) Transition frequency fT IC = 25 mA, VCE = 8 V, f = 500 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz, VBE = 0 , emitter grounded Collector emitter capacitance VCE = 10 V, f = 1 MHz, VBE = 0, base grounded Emitter-base capacitance VEB = 0.5 V, f = 1 MHz, VCB = 0 , collector grounded Noise figure IC = 5 mA, VCE = 8 V, ZS = ZSopt, f = 900 MHz f = 1.8 GHz Power gain, maximum stableIC = 15 mA IC = 15 mA, VCE = 8 V, Z S = ZSopt, Z L = ZLopt , f = 900 MHz Power gain, maximum available1) IC = 15 mA, VCE = 8 V, Z S = ZSopt, Z L = ZLopt , f = 1.8 GHz Transducer gain IC = 15 mA, VCE = 8 V, Z S = ZL = 50 , f = 900 MHz f = 1.8 MHz Third order intercept point at output2) VCE = 8 V, I C = 15 mA, f = 900MHz, ZS=ZL=50 1dB Compression point3) IC = 15 mA, VCE = 8 V, f = 900MHz, ZS=ZL=50
1G 1/2 ma = |S21e / S12e| (k-(k-1) ), Gms = |S 21 / S12 | 2IP3 value depends on termination of all intermodulation frequency components. Termination used for this measurement is 50 from 0.1 MHz to 6 GHz 3DC current at no input power
6 -
8 0.34
0.54
GHz pF
Ccb
Cce Ceb
-
0.2 1.1
-
F G ms 0.9 1.4 21 -
dB
dB
G ma
-
14.5
-
dB
|S 21e|2 IP 3 P-1dB 17 11 26 10.5 -
dB
dBm
3
2005-10-14
BFR183F
SPICE Parameter (Gummel-Poon Model, Berkley-SPICE 2G.6 Syntax): Transitor Chip Data:
IS = VAF = NE = VAR = NC = RBM = CJE = TF = ITF = VJC = TR = MJS = XTI = 1.0345 14.772 1.2149 3.4276 0.85331 1.0112 23.077 22.746 1.8773 1.1967 1.0553 0 3 fA V V fF ps mA V ns BF = IKF = BR = IKR = RB = RE = VJE = XTF = PTF = MJC = CJS = XTB = FC = 115.98 0.14562 10.016 0.013483 2.5426 1.3435 1.0792 0.36823 0 0.3 0 0 0.54852 A A V deg fF NF = ISE = NR = ISC = IRB = RC = MJE = VTF = CJC = XCJC = VJS = EG = TNOM 0.80799 16.818 0.99543 1.3559 0.43801 0.20486 0.45354 0.50905 460.11 0.053823 0.75 1.11 300 fA fA mA V fF V eV K
All parameters are ready to use, no scalling is necessary. Extracted on behalf of Infineon Technologies AG by: Institut fur Mobil- und Satellitentechnik (IMST)
Package Equivalent Circuit:
C4 C1 L2 B L3 C
B'
Transistor Chip E'
C'
L1 = L2 = L3 = C1 = C2 = C3 = C4 = C5 = C6 =
0.556 0.675 0.381 43 123 66 10 36 47
nH nH nH fF fF fF fF fF fF
C6
C2
L1
C3
C5
Valid up to 6GHz
E
For examples and ready to use parameters please contact your local Infineon Technologies distributor or sales office to obtain a Infineon Technologies CD-ROM or see Internet: http//www.infineon.com/silicondiscretes
EHA07524
4
2005-10-14
Package TSFP-3
BFR183F
Package Outline
1.2 0.05
10 MAX. 0.8 0.05
0.2 0.05
1.2 0.05 0.2 0.05
0.4
0.45
3
0.55 0.04
1
2
0.2 0.05 0.4 0.05 0.4 0.05
0.15 0.05
Foot Print
0.4
0.4
Marking Layout
Manufacturer
Pin 1
Type code Example
1.05
BCR847BF
Standard Packing
Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel
4 0.3
1.2 1.5 8
0.2
Pin 1
1.35
0.7
5
2005-10-14
BFR183F
Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 Munchen (c) Infineon Technologies AG 2005. All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.Infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
6
2005-10-14

▲Up To Search▲

Price & Availability of BFR183F

	To Download BFR183F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .