View CPC1002N_634585.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

4-Pin SOP OptoMOS(R) Relay
CPC1002N
Blocking Voltage Load Current Max On-resistance LED Current to operate
CPC1002N 60 700 0.55 2
Units V mA mA
Description
The CPC1002N is a miniature 1-Form-A DC solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The super efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled output is controlled by the input's highly efficient GaAlAs infrared LED. The CPC1002N uses Clare's state of the art double molded vertical construction packaging to produce the world's smallest relay. The CPC1002N offers board space savings of at least 20% over the competitor's larger 4-Pin SOP relay. It boasts the industries' lowest input current to operate in its class.
IM
* Designed for use in security systems complying with EN50130-4 * Only 2mA of LED current required to operate * Small 4-Pin SOP Package * TTL/CMOS Compatible input * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500Vrms Input/Output Isolation * No EMI/RFI Generation * Immune to radiated EM fields * SMD Pick & Place, Wave Solderable * Tape & Reel Version Available
IN
Part # CPC1002N CPC1002NTR
Approvals
* UL recognized file #E76270 * Certified to EN60950
Ordering Information
Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel)
Applications
* Security * Passive Infrared Detectors (PIR) * Data Signalling * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Aerospace * Industrial Controls
EL
Pin Configuration
CPC1002N Pinout
+ Control 1 4 DC +
PR
A
- Control 2
Switching Characteristics of Normally Open (Form A) Devices
RY
3
Features
DC -
DS-CPC1002N-R00B
www.clare.com
1
CPC1002N
Absolute Maximum Ratings (@ 25 C)
Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage Input to Output Operational Temperature Storage Temperature
1
Derate Linearly 3.33 mw / C
Electrical Characteristics
Parameter Output Characteristics @ 25C Load Current, Continuous 1 Peak Load Current On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current
1 2 3
Conditions IF=2mA 10ms IL=100mA VL=60V
Symbol IL ILPK RON ILEAK TON TOFF COUT
-
A
Min 2 0.3 0.9 IF IF VF IR
RY
Typ 25 1 1.2 Max 700 1 0.55 1 5 2 1.4 10 Units mA Arms A ms ms pF pF mA mA V A
Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125
Units V V mA A mW mW Vrms C C
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.
Load current derates linearly from 700mA @ 25oC to 560mA @80oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended.
2
PR
EL
IM
IF=3mA, VL=10V IF=3mA, VL=10V 50V; f=1MHz IL=700mA IF=5mA VR=5V
www.clare.com
IN
R00B
Manufacturing Information
Soldering Recommended soldering processes are limited to 245C component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents.
4-Pin SOIC Narrow ("N" Suffix)
0.38 TYP. (0.015 TYP.)
2.18 MAX. (0.086) 2.54 TYP. (0.100 TYP.)
330.2 DiA (13.00" DiA)
IM
A0 = 6.50 (0.256) A A
Tape and Reel Packaging for 4 pin SOIC package
IN
P = 8.00 (0.315) K1 = 2.30 (0.091) W = 12.00 MAX (0.472 MAX) K0 = 2.7 (0.106) SECTION A-A
PR
Embossed Carrier Embossment
EL
B0 = 4.70 (0.185)
Top Cover Tape Thickness 0.102 MAX (0.004 MAX)
NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2
A
Dimensions: mm (inches)
Specification: DS-CPC1002N-R00B (c)Copyright 2005, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/13/05
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
RY
PC Board Pattern (Top View)
MECHANICAL DIMENSIONS

▲Up To Search▲

Price & Availability of CPC1002N

	To Download CPC1002N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .