|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
RoHS Compliant Low Noise Amplifier 1400 - 2000 MHz Features * * * * * * * * * * Low Noise Figure: 1.6 dB High Input IP3: -6 dBm at 3 V, 6.5 mA bias High Gain: 18 dB Single Supply: +3 to +8 VDC Adjustable current: 3 to 20 mA with external resistor Lead-Free SOT-26 Plastic Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of AM50-0006 MAALSS0048 V2 Functional Block Diagram 1 6 2 5 3 4 Description M/A-COM's MAALSS0048 is a high dynamic range, GaAs MMIC, low noise amplifier in a lead-free, SOT-26 miniature surface mount, plastic package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The MAALSS0048 also features flexible biasing to control the current consumption vs. dynamic range trade-off. The MAALSS0048 can operate from any positive supply voltage in the 3 V to 8 V range. Its current can be controlled over a range of 3 mA to 20 mA with an external resistor. The MAALSS0048 is ideally suited for use where low noise figure, high gain, high dynamic range, and low power consumption are required. Typical applications included receiver front ends in PDC, DCS-1800, DCS-1900 and other PCN/PCS applications. It is also useful as a gain block, buffer, driver, and IF amplifier in both fixed or portable PDC and PCN/PCS systems. The MAALSS0048 is fabricated using a low-cost 0.5-micron gate length GaAs process. The process features full passivation for increased performance and reliability. The MAALSS0048 is 100% RF tested to ensure performance specification compliance. Pin Configuration Pin No. 1 2 3 4 5 6 Pin Name VDD GND RF Output GND REXT CEXT RF Input Description Positive supply voltage RF and DC Ground RF Output of the amplifier RF and DC Ground External Current Control By-Pass Capacitor RF Input of the amplifier Ordering Information 1 Part Number MAALSS0048 MAALSS0048TR-3000 MAALSS0048PDC MAALSS0048PCS Package SOT-26 Plastic Package 3000 piece reel 1400-1520 MHz Designer's Kit 1700-2000 MHz Designer's Kit 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1400 - 2000 MHz Electrical Specifications2: TA = +25C, Z0 = 50 , Pin = -30 dBm Parameter Test Conditions VDD = 3 Volts VDD = 3 Volts -- -- VDD = 3 Volts VDD = 3 Volts -- VDD = 3 Volts MAALSS0048 V2 Units Min. dB dB Ratio Ratio dBm dBm dB mA 15 -- -- -- -- -- -- 4.5 1500 MHz Typ. 18 1.60 2.2:1 1.5:1 1 -5.0 35 6.5 1900 MHz Max. 20 2.00 -- -- -- -- -- 10 Min. 15 -- -- -- -- -- -- 4.5 Typ. 17.5 1.65 1.5:1 1.5:1 0 -6.0 35 6.5 Max. 20 2.00 -- -- -- -- -- 10 Gain Noise Figure Input VSWR Output VSWR Output 1 dB Compression Input IP3 Reverse Isolation Drain Current 2. Using external 15 Ohm resistor. See Functional Schematics. Absolute Maximum Ratings 3,4 Parameter VDD Input Power Current 5 6 Lead-Free SOT-26 Absolute Maximum +10 VDC +17 dBm 30 mA +150C -40C to +85C -65C to +150C Channel Temperature Operating Temperature Storage Temperature 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 5. When pin #5 is used to increase current (see note 8). 6. Thermal resistance (jc) = +150C/W Handling Procedures Please observe the following precautions to avoid damage: Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1400 - 2000 MHz Data for 1700 - 2000 MHz Operation Functional Schematic Input Reflection Coefficient Frequency in (mag) MAALSS0048 V2 1700 MHz 0.699 48.47 1850 MHz 0.674 38.68 2000 MHz 0.649 29.27 in (ang) External Circuitry Parts List 7 Part C1 C2 L1 L2 R1 C3 Value 47 pF 470 pF 2.7 nH 22 nH See note 8 470 pF Purpose DC Block By-Pass Tuning RF Choke Optional current control By-Pass Recommended PCB Configuration Layout View Pin 1 7. All external circuitry parts are readily available, low cost surface mount components (.060 in. x .030 in. or .080 in. x .050 in.) 8. Pin 5 allows use of an external resistor to ground for optional, higher current. For IDD ~ 5 mA, R1 = 150 ohms; IDD ~ 6.5 mA, R1 = 120 ohms; IDD ~ 20 mA, R1 = 27 ohms. Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ohm lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.20 mm) yielding a 50 Ohm line width of 0.015" (0.38 mm). The recommended RF metalization thickness is 1 ounce copper. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1400 - 2000 MHz Typical Performance Curves, 1700 - 2000 MHz Gain vs. Bias @ +25C 22 MAALSS0048 V2 Input IP3 vs. Bias @ +25C 10 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 20 5 18 0 16 -5 14 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 12 1.7 -10 1.8 1.9 2.0 2.1 2.2 1.7 1.8 1.9 2.0 Frequency (GHz) Frequency (GHz) Noise Figure (Bias = 3V, 6.5 mA) 2.5 3 V, 6.5 mA VSWR (Bias = 3V, 6.5 mA) 3.0 Input VSWR Output VSWR 2.5 2.0 2.0 1.5 1.5 1.0 1.7 1.8 1.9 2.0 2.1 2.2 1.0 1.7 1.8 1.9 2.0 2.1 2.2 Frequency (GHz) Frequency (GHz) Output P1 dB vs. Bias @+25C 10 Input IP3 vs. Drain Current (Frequency = 1900 MHz) 10 5V 3V 5 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 5 0 0 -5 -5 -10 1.7 -10 1.8 1.9 2.0 5 10 15 20 Frequency (GHz) 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Drain Current (mA) * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1400 - 2000 MHz Typical Performance Curves, 1700 - 2000 MHz Gain vs. Temperature (Bias = 3V, 6.5 mA) 22 +25C +85C -40C MAALSS0048 V2 Noise Figure vs. Temperature (Bias = 3V, 6.5 mA) 3.0 +25C +85C -40C 20 2.5 18 2.0 16 1.5 14 1.0 12 1.7 1.8 1.9 2.0 2.1 2.2 0.5 1.7 1.8 1.9 2.0 2.1 2.2 Frequency (GHz) Frequency (GHz) 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1400 - 2000 MHz Data for 1400 - 1520 MHz Operation Functional Schematic VDD MAALSS0048 V2 External Circuitry Parts List9 Part C1 L2 C2 Value 47 pF 470 pF 10 nH 3.9 nH 22 nH See note 10 470 pF Purpose DC Block By-Pass Tuning Tuning RF Choke Current control By-Pass C2 L1 L2 L3 1 L1 RF Input C1 6 5 3 2,4 RF Output L3 R1 C3 9. R1 (See note 10) C3 All external circuitry parts are readily available, low cost surface mount components (.060 in. x .030 in. or .080 in. x .050 in.) 10. Pin 5 allows use of an external resistor to ground for optional, higher current. For IDD ~ 5 mA, R1 = 150 ohms; IDD ~ 6.5 mA, R1 = 120 ohms; IDD ~ 20 mA, R1 = 27 ohms. Recommended PCB Configuration Layout View Cross Section View Pin 1 The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ohm lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.20 mm) yielding a 50 Ohm line width of 0.015" (0.38 mm). The recommended RF metalization thickness is 1 ounce copper. 6 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1400 - 2000 MHz Typical Performance Curves, 1400 - 1520 MHz Gain vs. Bias @ +25C 22 MAALSS0048 V2 Input IP3 vs. Bias @ +25C 10 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 20 5 18 0 16 -5 14 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 12 1.30 1.35 1.40 1.45 1.50 1.55 1.60 -10 1.35 1.40 1.45 1.50 1.55 Frequency (GHz) Frequency (GHz) Noise Figure (Bias = 3V, 6.5 mA) 2.5 3 V, 6.5 mA VSWR (Bias = 3V, 6.5 mA) 3.0 Input VSWR Output VSWR 2.5 2.0 2.0 1.5 1.5 1.0 1.35 1.40 1.45 1.50 1.55 1.0 1.30 1.35 1.40 1.45 1.50 1.55 1.60 Frequency (GHz) Frequency (GHz) Output P1 dB vs. Bias @+25C 15 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA Input IP3 vs. Drain Current (Frequency = 1500 MHz) 10 5V 3V 10 5 5 0 0 -5 -5 1.35 -10 1.40 1.45 1.50 1.55 5 10 15 20 Frequency (GHz) 7 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Drain Current (mA) * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1400 - 2000 MHz Typical Performance Curves, 1400 - 1520 MHz Gain vs. Temperature (Bias = 3V, 6.5 mA) 22 +25C +85C -40C MAALSS0048 V2 Noise Figure vs. Temperature (Bias = 3V, 6.5 mA) 3.0 +25C +85C -40C 20 2.5 18 2.0 16 1.5 14 1.0 12 1.30 1.35 1.40 1.45 1.50 1.55 1.60 0.5 1.35 1.40 1.45 1.50 1.55 Frequency (GHz) Frequency (GHz) 8 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MAALSS0048 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |