 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Raychem Overvoltage Devices ESD Protector PESD0603-140 GENERAL DESCRIPTION BENEFITS * * * * * www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 Board space savings Help to protect sensitive electronic circuits against electrostatic discharge (ESD) events Assist equipment to pass IEC 61000-4-2, level 4 testing Suitable for high speed data transmission applications Longer battery life, due to low leakage current FEATURES * * * * * * * Thick film technology Low capacitance (0.25 pF typical) Low leakage current Low trigger voltage Low clamping voltage Capable of withstanding numerous ESD strikes Compatible with standard reflow installation procedures APPLICATIONS * * * * * * * Cellular phones Antennas (cell phones, GPS...) Portable devices (PDA, DSC, BlueTooth...) Printer ports High speed Ethernet USB 2.0 and IEEE 1394 interfaces DVI and HDMI interfaces MATERIALS INFORMATION ROHS Compliant ELV Compliant PART NUMBERING PESD 0603 - 140 Series EIA Size Operating Voltage Designator 0 14 x 10 = 14VDC Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 (c) 2005 Tyco Electronics Corporation. All Rights Reserved 1 of 5 Raychem Overvoltage Devices ESD Protector PESD0603-140 TYPICAL DEVICE RATINGS AND CHARACTERISTICS www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 Typical IEC Typical Typical TLP Typical TLP Typical Continuous Typical IEC Clamping Clamping Clamping Capacitance, TLP Max Trigger Voltage1 Voltage2 Trigger Voltage2 @ 1 MHz, Operating Voltage1 2 after 30ns Voltage after 30ns after 60ns 1Vrms Voltage Symbol Unit Value VDC V 14 VT(IEC) V 350 VC(IEC) V 30 VT(TLP) V 320 VC(TLP 30) V 75 VC(TLP 60) V 65 Cp pF 0.25 Typical Leakage Current @14VDC IL(Typ) A <0.001 Max Leakage Current @14VDC IL(MAX) A 0.01 Note 1: IEC61000-4-2, level 4, 8kV contact test method Note 2: TLP test method at 500V (refer to graph on next page) GENERAL CHARACTERISTICS Storage temperature: -40C ... +85C Operating temperature: -40C ... + 85C ESD voltage capability (tested per IEC 61000-4-2) Contact discharge mode: typical 8kV, max 15kV Air discharge mode: typical 15kV, max 25kV ESD pulse withstand: Typically 1,000 pulses (tested per IEC 61000-4-2, level 4, contact method) ENVIRONMENTAL SPECIFICATIONS Bias Humidity Test Test Conditions Pass / Fail Criteria 40C, 90% RH, MAX VDC, 1000 hrs IL 10 A Thermal Shock -40C to 85C, 30 min dwell, 5 cycles IL 10 A Bias Heat Test 85C, MAX VDC, 1000 hrs IL 10 A Bias Low Temp Test -40C, MAX VDC, 1000 hrs IL 10 A Solderability 230C 5C, 3 1s, 95% coverage IL 10 A Solder Heat Vibration 1 to 2kHz, 1.5 min cycle, 2hrs each in X-Y-Z-direction IL 10 A Solvent Resistance IPA ultrasonic 300s IL 10 A 260C, 10s IL 10 A Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 (c) 2005 Tyco Electronics Corporation. All Rights Reserved 2 of 5 Raychem Overvoltage Devices ESD Protector PESD0603-140 TYPICAL TRANSMISSION LINE PULSE RESPONSE GRAPH 500.00 www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 450.00 400.00 350.00 300.00 Voltage (V) 250.00 200.00 150.00 100.00 50.00 0.00 0.00 10.00 20.00 30.00 40.00 50.00 Time (ns) 60.00 70.00 80.00 90.00 100.00 Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 (c) 2005 Tyco Electronics Corporation. All Rights Reserved 3 of 5 Raychem Overvoltage Devices ESD Protector PESD0603-140 DIMENSIONS www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 B Drawing Not To Scale mm: in*: length A MIN MAX 1.4 1.8 (0.06) (0.07) Height B MIN MAX 0.38 0.58 (0.01) (0.02) Terminal Width C MIN MAX 0.1 0.5 (0.004) (0.02) Width D MIN MAX 0.6 1.0 (0.02) (0.04) *Rounded off approximation RECOMMENDED LAND PATTERN: Solder thickness 0.15 to 0.2mm X W Y Z W mm: in: * Min 0.9 (0.035) Max 1.0 (0.039) Min 0.5 (0.020) X Max 0.6 (0.024) Y (Ref) Min Max 1.0 1.1 (0.039) (0.043) Z Min 2.7 (0.106) Max 2.8 (0.110) *Rounded off approximation. Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 (c) 2005 Tyco Electronics Corporation. All Rights Reserved 4 of 5 Raychem Overvoltage Devices ESD Protector PESD0603-140 SOLDER REFLOW RECOMMENDATIONS: A B C Temperature ramp up 1 Preheating Temperature ramp up 2 Main heating Cooling From ambient to Preheating temperature 140C - 160C From Preheating to Main heating temperature at 200C at 220C at 240C at 260C From main heating temperature to 100C 30s to 60s 60s to 120s 20s to 40s 60s ~ 70s 50s ~ 60s 30s ~ 40s 5s ~ 10s max 4C/s www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 D E Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of each product for their applications. Tyco Electronics Corporation assumes no responsibility for the use of its product or for any infringement of patents or other rights of third parties resulting from the use of its product. No license is granted by implication or otherwise under any patent or proprietary right of Tyco Electronics except the right to use such product for the purpose for which it is sold. Tyco Electronics reserves the right to change or update, without notice, any information contained in this publication; to change, without notice, the design, construction, processing, or specification of any product; and to discontinue or limit production or distribution of any product. This publication supersedes and replaces all information previously supplied. Without express written consent by an officer of Tyco Electronics, Tyco Electronics does not authorize the use of any its products as components in nuclear facility applications, aerospace, or in critical life support devices or systems. Tyco Electronics' only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. Raychem is a trademark of Tyco Electronics Corporation Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 (c) 2005 Tyco Electronics Corporation. All Rights Reserved 5 of 5 |
Price & Availability of PESD0603-140
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |