View PDS3100_498631.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODEL: PDS3100
PDS3100
3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
PowerDI a5
Features
NEW PRODUCT
* * * * * * * * * * * * * *
Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency Low Reverse Leakage Current For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications High Forward Surge Current Capability Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb)
L1
LEFT PIN RIGHT PIN
D b2 L1
A A2
PowerDIa5 Dim A A2 b1 b2 Min 1.05 0.33 0.80 1.70 3.90 6.40 5.30 0.75 0.50 1.20 Max 1.15 0.43 0.99 1.88 4.05 6.60 5.45 0.95 0.65 1.50
E
E1
Mechanical Data
Case: PowerDIa5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 e3 Polarity: See Diagram Marking: See Page 3 Weight: 0.093 grams (approx.)
e
BOTTOMSIDE b1 HEAT SINK
b1 D D2 b2
L E2 E
A2
D D2 E e E1 E2 L L1 W
3.05 NOM 1.84 NOM 3.55 NOM
Note: Pins Left & Right must be electrically connected at the printed circuit board.
W
L1 e
b1
b1
All Dimensions in mm
Maximum Ratings
@ TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also Figure 5) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Operating Temperature Range Storage Temperature Range Symbol VRRM VRWM VR VR(RMS) IO IFSM Tj TSTG Value 100 70 3 90 -65 to +150 -65 to +150 Unit V V A A C C
Thermal Characteristics
Characteristic
@ TA = 25C unless otherwise specified Symbol RqJS RqJA RqJA RqJA Typ 3/4 3/4 3/4 3/4 Max 6.0 3/4 3/4 3/4 Unit C/W C/W C/W C/W
Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 2) Thermal Resistance Junction to Ambient Air (Note 3) Thermal Resistance Junction to Ambient Air (Note 4)
Notes: 1. 2. 3. 4.
RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
DS30487 Rev. 4 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3 www.diodes.com
PDS3100
a Diodes Incorporated
Electrical Characteristics
@ TA = 25C unless otherwise specified Symbol V(BR)R VF Min 100 3/4 3/4 3/4 3/4 3/4 3/4 Typ 3/4 0.71 0.61 0.78 0.68 2 0.5 Max 3/4 0.75 0.65 0.83 0.75 200 20 Unit V V mA mA Test Condition IR = 0.2mA IF = 3A, Tj = 25C IF = 3A, Tj = 100C IF = 6A, Tj = 25C IF = 6A, Tj = 100C Tj = 25C, VR = 100V Tj = 100C, VR = 100V
NEW PRODUCT
Characteristic Reverse Breakdown Voltage (Note 5) Forward Voltage
Reverse Current (Note 5)
Notes: 5. Short duration test pulse used to minimize self-heating effect.
IR
10
IF, INSTANTANEOUS FORWARD CURRENT (mA)
100000
Tj = +25C
10000
1
1000
Tj = 150C
0.1
Tj = 125C
100
10
Tj = 100C
0.01
1
Tj = 85C
0.001
0.1
Tj = 25C Tj = -65C
Tj = -65C
0.01 0
100 200 300 400 500 600 700 800 900 1000 1100 1200 1300
0.0001 0 20 40 60 80 100 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics
VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 1 Typical Forward Characteristics
IR, INSTANTANEOUS REVERSE CURRENT (mA)
10
Tj = +150C
300
f = 1MHz
CT, TOTAL CAPACITANCE (pF)
250
1.0
Tj = +125C
200
150
Tj = +100C
0.1
Tj = +85C
100
50
0.01 0 20 40 60 80 100
0 0 5 10 15 20 25 30 35 40
VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics
VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance vs. Reverse Voltage
DS30487 Rev. 4 - 2
PowerDI is a trademark of Diodes Incorporated.
2 of 3 www.diodes.com
PDS3100
PF, FORWARD POWER DISSIPATION (W)
4 3.5 3 2.5 2 1.5 1
Note 2 Note 6
4
IPK = 1 (DC) IAV
NEW PRODUCT
IF, DC FORWARD CURRENT (A)
3
2
1
0.5 0 0 120 60 90 30 TA, AMBIENT TEMPERATURE (C) Fig. 5 DC Forward Current Derating 150
0 0 1 2 3 4 5 6 7 IF, FORWARD CURRENT (A) Fig. 6 Forward Power Dissipation
200 TA, DERATED AMBIENT TEMPERATURE (C) 180 160 140 120 100 80 60 40 20 0 0 25 50 75 100 VR, DC REVERSE VOLTAGE (V) Fig. 7 Operating Temperature Derating
Note 2
Ordering Information
Device PDS3100-13
Notes: 1. 2. 3. 4. 5. 6. 7.
(Note 7) Packaging PowerDIa5 Shipping 5000/Tape & Reel
RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. Short duration test pulse used to minimize self-heating effect. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 3.0mm. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
S3100
YYWWK
S3100 = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last digit of year ex: 4 for 2004 WW = Week code 01 to 52 K = Factory Designator
DS30487 Rev. 4 - 2
PowerDI is a trademark of Diodes Incorporated.
3 of 3 www.diodes.com
PDS3100

▲Up To Search▲

Price & Availability of PDS3100

	To Download PDS3100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .