 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOS FET Relays New MOS FET Relay with Low Output Capacitance and ON Resistance (CR = 10pF* W) in a 40-V Load Voltage Model * ON resistance of 1 W (typical) suppresses output signal attenuation. * Leakage current of 1.0 nA max. when output relay is open. G3VM-41GR5 Application Examples * Semiconductor inspection tools * Measurement devices * Broadband systems * Data loggers Note: The actual product is marked differently from the image shown here. List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 40 VAC Model G3VM-41GR5 G3VM-41GR5(TR) Number per stick 100 --Number per tape --2,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-41GR5 4.40.25 3.90.2 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 0.40.1 2.540.25 0.10.1 0.60.3 7.00.4 Weight: 0.1 g Terminal Arrangement/Internal Connections (Top View) G3VM-41GR5 4 3 1 2 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-41GR5 6 to 6.3 1.2 0.8 2.54 52 G3VM-41GR5 Absolute Maximum Ratings (Ta = 25C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Output dielectric strength Continuous load current ON current reduction rate Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Symbol IF IFP D IF/C VR Tj VOFF IO D ION/C Tj VI-O Ta Tstg --Rating 50 1 -0.5 5 125 40 300 -3.0 125 1,500 -20 to +85 -40 to +125 260 Unit mA A mA/C V C V mA mA/C C Vrms C C C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta 25C 100 ms pulses, 100 pps Ta 25C Measurement Conditions G3VM-41GR5 Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Electrical Characteristics (Ta = 25C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Current leakage when the relay is open Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time Symbol VF IR CT IFT RON ILEAK Minimum 1.0 ----------Typical 1.15 --15 --1.0 --Maximum 1.3 10 --4 1.5 1.0 V mA pF mA W nA Unit Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 2 3 Note: 2. Turn-ON and Turn-OFF Times IF 1 4 RL VDD VOUT IO = 100 mA IF = 5 mA, IO = 300 mA, t < 1 s VOFF = 30 V, Ta = 50C VOUT IF COFF CI-O RI-O tON tOFF ----1,000 ----- 10.0 0.8 ------- 14.0 ----0.5 0.5 pF pF MW ms ms V = 0, f = 100 MHz, t<1s f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH 60% IF = 10 mA, RL = 200 W, VDD = 20 V (See note 2.) 10% tON 90% tOFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Output dielectric strength Operating LED forward current Continuous load current Operating temperature Symbol VDD IF IO Ta --10 --25 Minimum --------Typical 32 30 300 60 Maximum V mA mA C Unit Engineering Data Load Current vs. Ambient Temperature G3VM-41GR5 Load current (mA) 500 Safety Precautions Refer to page 6 for precautions common to all G3VM models. 400 300 200 100 0 -20 0 20 40 60 80 100 Ambient temperature (C) 53 |
Price & Availability of G3VM-41GR5TR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |