View BYV29-600_478748.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Philips Semiconductors
Product specification
Rectifier diodes ultrafast
FEATURES
* Low forward volt drop * Fast switching * Soft recovery characteristic * High thermal cycling performance * Low thermal resistance
BYV29-600
SYMBOL
QUICK REFERENCE DATA VR = 600V
k 1
a 2
VF 1.03 V IF(AV) = 9 A trr 60 ns
GENERAL DESCRIPTION
Ultra-fast, epitaxial rectifier diodes intended for use as output rectifiers in high frequency switched mode power supplies. The BYV29-600 is supplied in the conventional leaded SOD59 (TO220AC) package.
PINNING
PIN 1 2 tab DESCRIPTION cathode anode cathode
SOD59 (TO220AC)
tab
1
2
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VRRM VRWM VR IF(AV) IFRM IFSM PARAMETER Peak repetitive reverse voltage Crest working reverse voltage Continuous reverse voltage square wave; = 0.5; Tmb 120 C Repetitive peak forward current t = 25 s; = 0.5; Tmb 120 C Non-repetitive peak forward t = 10 ms current. t = 8.3 ms sinusoidal; with reapplied VRRM(max) Storage temperature Operating junction temperature Average forward current1 CONDITIONS MIN. -40 MAX. 600 600 600 9 18 70 77 150 150 UNIT V V V A A A A C C
Tstg Tj
THERMAL RESISTANCES
SYMBOL Rth j-mb Rth j-a PARAMETER Thermal resistance junction to mounting base Thermal resistance junction to ambient CONDITIONS MIN. in free air. TYP. 60 MAX. 2.5 UNIT K/W K/W
1 Neglecting switching and reverse current losses. February 2000 1 Rev 1.100
Philips Semiconductors
Product specification
Rectifier diodes ultrafast
ELECTRICAL CHARACTERISTICS
Tj = 25 C unless otherwise stated SYMBOL VF IR Qs trr Irrm Vfr PARAMETER Forward voltage Reverse current Reverse recovery charge Reverse recovery time Peak reverse recovery current Forward recovery voltage CONDITIONS IF = 8 A; Tj = 150C IF = 8 A IF = 20 A VR = VRRM VR = VRRM; Tj = 100 C IF = 2 A to VR 30 V; dIF/dt = 20 A/s IF = 1 A to VR 30 V; dIF/dt = 100 A/s IF = 10 A to VR 30 V; dIF/dt = 50 A/s; Tj = 100C IF = 10 A; dIF/dt = 10 A/s MIN. TYP. 0.90 1.05 1.30 2.0 0.1 40 50 3.0 3.2
BYV29-600
MAX. 1.03 1.25 1.45 50 0.35 70 60 5.5 -
UNIT V V V A mA nC ns A V
February 2000
2
Rev 1.100
Philips Semiconductors
Product specification
Rectifier diodes ultrafast
BYV29-600
I
dI F dt
F
18 16
Forward dissipation, PF (W) 1.9 2.2 2.8 4
Ths(max) (C) a = 1.57 110 120
t
14
rr time
12 10 8 6
130
Q I I
s
10%
100%
4 2 0
140
150 0 2 4 6 8 10 Average forward current, IF(AV) (A) 12
R
rrm
Fig.1. Definition of trr, Qs and Irrm
Fig.4. Maximum forward dissipation PF = f(IF(AV)); sinusoidal current waveform where a = form factor = IF(RMS) / IF(AV).
I
F
1000
trr / ns
10A
time VF V VF time
10 10 -diF/dt 100 100 1A Tj = 25 C Tj = 150 C
fr
Fig.2. Definition of Vfr
Fig.5. Maximum trr at Tj = 25C and 100C
Forward dissipation, PF (W) 20
Ths(max) (C)
10
Irrm / A IF=10A
15 0.5 10 0.1
tp
D = 1.0
112.5
1
125
D = tp/T
0.2
IF=1A
0.1
137.5
5
T
0 0 2 4 6 8 10 Average forward current, IF(AV) (A) 12
150 14
0.01 1
Tj = 25 C Tj = 100C 10 -dIF/dt (A/us) 100
Fig.3. Maximum forward dissipation PF = f(IF(AV)); square wave where IF(AV) =IF(RMS) x D.
Fig.6. Maximum Irrm at Tj = 25C and 100C.
February 2000
3
Rev 1.100
Philips Semiconductors
Product specification
Rectifier diodes ultrafast
BYV29-600
30
IF / A Tj=150 C Tj=25 C
BYW29
1000
Qs / nC
10A 2A 10A IF=2A
20
100
typ 10
max
10 25 C 150 C
0 0
0.5
1 VF / V
1.5
2
1 1 -diF / dt 10 100
Fig.7. Typical and maximum forward characteristic IF = f(VF); parameter Tj
Fig.9. Maximum Qs at Tj = 25C
100
Cd / pF
10 Transient thermal impedance, Zth j-mb (K/W)
1
10
0.1
0.01
P D
tp
D=
tp T t
1 1 10 VR / V 100 1000
Fig.8. Typical junction capacitance Cd at f = 1 MHz; Tj = 25C
0.001 1us
T
10us
100us 1ms 10ms 100ms 1s pulse width, tp (s) BYV29
10s
Fig.10. Transient thermal impedance Zth j-mb= f(tp)
February 2000
4
Rev 1.100
Philips Semiconductors
Product specification
Rectifier diodes ultrafast
MECHANICAL DATA
Dimensions in mm Net Mass: 2 g
Plastic single-ended package; heatsink mounted; 1 mounting hole; 2-lead TO-220
BYV29-600
SOD59
E P
A A1 q
D1
D
L2(1)
L1 Q
L
b1
1
2
b e c
0
5 scale
10 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 4.5 4.1 A1 1.39 1.27 b 0.9 0.7 b1 1.3 1.0 c 0.7 0.4 D 15.8 15.2 D1 6.4 5.9 E 10.3 9.7 e 5.08 L 15.0 13.5 L1 3.30 2.79 L2
(1)
P 3.8 3.6
q 3.0 2.7
Q 2.6 2.2
3.0
Note 1. Terminals in this zone are not tinned. OUTLINE VERSION SOD59 REFERENCES IEC JEDEC 2-lead TO-220 EIAJ EUROPEAN PROJECTION ISSUE DATE 97-06-11
Fig.11. TO220AC; pin 1 connected to mounting base. Notes 1. Refer to mounting instructions for TO220 envelopes. 2. Epoxy meets UL94 V0 at 1/8".
February 2000
5
Rev 1.100
Philips Semiconductors
Product specification
Rectifier diodes ultrafast
DEFINITIONS
Data sheet status Objective specification Product specification Limiting values
BYV29-600
This data sheet contains target or goal specifications for product development. This data sheet contains final product specifications.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 2000 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
February 2000
6
Rev 1.100

▲Up To Search▲

Price & Availability of BYV29-600

	To Download BYV29-600 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .