![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TIP47, TIP48, TIP49, TIP50 NPN SILICON POWER TRANSISTORS Copyright (c) 1997, Power Innovations Limited, UK DECEMBER 1971 - REVISED MARCH 1997 q q q q 40 W at 25C Case Temperature 1 A Continuous Collector Current 2 A Peak Collector Current 20 mJ Reverse-Energy Rating B C E 1 2 3 TO-220 PACKAGE (TOP VIEW) Pin 2 is in electrical contact with the mounting base. MDTRACA absolute maximum ratings at 25C case temperature (unless otherwise noted) RATING TIP47 Collector-base voltage (IE = 0) TIP48 TIP49 TIP50 TIP47 Collector-emitter voltage (IB = 0) TIP48 TIP49 TIP50 Emitter-base voltage Continuous collector current Peak collector current (see Note 1) Continuous base current Continuous device dissipation at (or below) 25C case temperature (see Note 2) Continuous device dissipation at (or below) 25C free air temperature (see Note 3) Unclamped inductive load energy (see Note 4) Operating junction temperature range Storage temperature range Lead temperature 3.2 mm from case for 10 seconds NOTE 1: 2. 3. 4. V EBO IC ICM IB Ptot Ptot 1/2LIC 2 Tj Tstg TL VCEO VCBO SYMBOL VALUE 350 400 450 500 250 300 350 400 5 1 2 0.6 40 2 20 -65 to +150 -65 to +150 260 V A A A W W mJ C C C V V UNIT This value applies for tp 1 ms, duty cycle 2%. Derate linearly to 150C case temperature at the rate of 0.32 W/C. Derate linearly to 150C free air temperature at the rate of 16 mW/C. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 mH, IB(on) = 0.4 A, R BE = 100 , VBE(off) = 0, RS = 0.1 , VCC = 20 V. PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 TIP47, TIP48, TIP49, TIP50 NPN SILICON POWER TRANSISTORS DECEMBER 1971 - REVISED MARCH 1997 electrical characteristics at 25C case temperature PARAMETER Collector-emitter breakdown voltage TEST CONDITIONS TIP47 V (BR)CEO IC = 30 mA IB = 0 TIP48 TIP49 TIP50 VBE = 0 V BE = 0 V BE = 0 V BE = 0 IB = 0 IB = 0 IB = 0 IB = 0 IC = 0 IC = 0.3 A IC = IC = IC = 1A 1A 1A (see Notes 5 and 6) (see Notes 5 and 6) (see Notes 5 and 6) f = 1 kHz f = 2 MHz 25 5 30 10 1 1.5 V V TIP47 TIP48 TIP49 TIP50 TIP47 TIP48 TIP49 TIP50 MIN 250 300 350 400 1 1 1 1 1 1 1 1 1 150 mA mA mA V TYP MAX UNIT (see Note 5) VCE = 350 V ICES Collector-emitter cut-off current V CE = 400 V V CE = 450 V V CE = 500 V VCE = 150 V ICEO Collector cut-off current Emitter cut-off current Forward current transfer ratio Collector-emitter saturation voltage Base-emitter voltage Small signal forward current transfer ratio Small signal forward current transfer ratio V CE = 200 V V CE = 250 V V CE = 300 V IEBO hFE VCE(sat) VBE hfe VEB = VCE = V CE = IB = VCE = VCE = VCE = 5V 10 V 10 V 0.2 A 10 V 10 V 10 V IC = 0.2 A IC = 0.2 A |hfe| NOTES: 5. These parameters must be measured using pulse techniques, tp = 300 s, duty cycle 2%. 6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. resistive-load-switching characteristics at 25C case temperature PARAMETER ton toff TEST CONDITIONS IC = 1 A V BE(off) = -5 V IB(on) = 0.1 A RL = 200 MIN IB(off) = -0.1 A (see Figures 1 and 2) TYP 0.2 2 MAX UNIT s s Turn on time Turn off time Voltage and current values shown are nominal; exact values vary slightly with transistor parameters. PRODUCT INFORMATION 2 TIP47, TIP48, TIP49, TIP50 NPN SILICON POWER TRANSISTORS DECEMBER 1971 - REVISED MARCH 1997 PARAMETER MEASUREMENT INFORMATION +25 V BD135 120 680 F 100 V cc V= 250 V CC T V1 tp 47 100 F TUT 15 V1 100 BD136 82 680 F tp = 20 s Duty cycle = 1% V1 = 15 V, Source Impedance = 50 Figure 1. Resistive-Load Switching Test Circuit C IC A - B = td B - C = tr E - F = tf D - E = ts A - C = ton D - F = toff B 90% 90% E 10% 10% F 0% 90% IB D dIB 2 A/s dt I B(on) A 10% 0% I B(off) Figure 2. Resistive-Load Switching Waveforms PRODUCT INFORMATION 3 TIP47, TIP48, TIP49, TIP50 NPN SILICON POWER TRANSISTORS DECEMBER 1971 - REVISED MARCH 1997 TYPICAL CHARACTERISTICS TYPICAL DC CURRENT GAIN vs COLLECTOR CURRENT VCE = 10 V TC = 25C tp = 300 s, duty cycle < 2% VCE(sat) - Collector-Emitter Saturation Voltage - V 50 TCP770AA COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT 0*3 TCP770AB hFE - Typical DC Current Gain 40 IC / IB = 5 TC = 25C tp = 300 s, duty cycle < 2% 0*2 30 20 0*1 10 0 0.01 0.1 IC - Collector Current - A 1 0 0*01 0*1 IC - Collector Current - A 1 Figure 3. Figure 4. BASE-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT 1.0 VBE(sat) - Base-Emitter Saturation Voltage - V 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0*01 VCE = 10 V TC = 25C tp = 300 s, duty cycle < 2% TCP770AC 0*1 IC - Collector Current - A 1*0 Figure 5. PRODUCT INFORMATION 4 TIP47, TIP48, TIP49, TIP50 NPN SILICON POWER TRANSISTORS DECEMBER 1971 - REVISED MARCH 1997 MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA 10 SAP770AA IC - Collector Current - A 1*0 0.1 tp = 100 s tp = 500 s tp = 1 ms DC Operation 0*01 1*0 10 TIP47 TIP48 TIP49 TIP50 100 1000 VCE - Collector-Emitter Voltage - V Figure 6. PRODUCT INFORMATION 5 TIP47, TIP48, TIP49, TIP50 NPN SILICON POWER TRANSISTORS DECEMBER 1971 - REVISED MARCH 1997 MECHANICAL DATA TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. TO220 4,70 4,20 o 3,96 3,71 10,4 10,0 2,95 2,54 6,6 6,0 15,90 14,55 1,32 1,23 see Note B see Note C 6,1 3,5 0,97 0,61 1 2 3 1,70 1,07 14,1 12,7 2,74 2,34 5,28 4,88 2,90 2,40 0,64 0,41 VERSION 1 VERSION 2 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTES: A. The centre pin is in electrical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version. Version 1, 18.0 mm. Version 2, 17.6 mm. MDXXBE PRODUCT INFORMATION 6 TIP47, TIP48, TIP49, TIP50 NPN SILICON POWER TRANSISTORS DECEMBER 1971 - REVISED MARCH 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright (c) 1997, Power Innovations Limited PRODUCT INFORMATION 7 |
Price & Availability of TIP50
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |