 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PM100CVA120 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 IntellimodTM Module Three Phase IGBT Inverter Output 100 Amperes/1200 Volts TERMINAL CODE 11. UP 1. WFO 2. VWPC 12. VUP1 3. WP 13. NC 4. VWP1 14. FO 5. VFO 15. VNC 6. VVPC 16. VN1 7. VP 17. UN 8. VVP1 18. VN 9. UFO 19. WN 10. VUPC P N A D P M 1234 P R U Q BKE 5678 9 10 1112 UV 13 14 15 16 L - TYP. U V W 17 18 19 M T (4 TYP.) N CCO (4 PLACES) AA - TYP. Z - TYP. J TYP. X S NUTS (5 TYP.) W SEE DETAIL A H BB SQ PIN - TYP. (19 PLACES) DETAIL A C Y G F Description: Powerex IntellimodTM Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: Complete Output Power Circuit Gate Drive Circuit Protection Logic - Short Circuit - Over Temperature - Under Voltage Applications: Inverters UPS Motion/Servo Control Power Supplies Ordering Information: Example: Select the complete part number from the table below -i.e. PM75CVA120 is a 1200V, 75 Ampere IntellimodTM Intelligent Power Module. Type PM Current Rating Amperes 100 VCES Volts (x 10) 120 VWP1 WFO WP VWPC VUP1 UFO UP VUPC VVP1 VFO VP VVPC WN VNC VN1 UN NC VN RfO Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M N P Inches 4.72 4.02 0.95+0.04/-0.02 4.130.010 3.430.010 0.16 0.95 0.42 0.87 3.510.02 0.47 0.48 0.77 0.30 Millimeters 120.0 102.0 24.1+1.0/-0.5 105.00.25 87.00.25 4.0 24.1 10.6 22.0 89.20.5 12.0 12.3 19.5 7.5 Dimensions Q R S T U V W X Y Z AA BB CC Inches 0.59 0.72 M5 Metric 0.22 Dia. 0.560.010 1.720.012 0.570.012 3.35 0.85 0.100.010 0.1370.010 0.02 SQ 0.12+0.04/-0.02 Millimeters 15.1 18.25 M5 Dia. 5.5 14.10.25 43.570.3 14.60.3 85.2 21.6 2.540.25 3.490.25 0.64 SQ 3.0+1.0/-0.5 FO GND FO IN VCC TEMP GND OUT Si TH GND FO IN VCC GND Si OUT GND FO IN VCC GND Si OUT GND FO IN VCC GND Si OUT GND FO IN VCC GND Si OUT GND FO IN VCC GND Si OUT RfO = 1.5k OHM N W V U P 431 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM100CVA120 IntellimodTM Module Three Phase IGBT Inverter Output 100 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25C unless otherwise specified Characteristics Power Device Junction Temperature Storage Temperature Case Operating Temperature Mounting Torque, M5 Mounting Screws (Typical) Mounting Torque, M5 Main Terminal Screws (Typical) Module Weight (Typical) Supply Voltage (Applied between P - N) Supply Voltage Protected by SC (VD = 13.5 ~16.5V, Inverter Part, Tj = 125C Start) Isolation Voltage, AC 1 minute, 60Hz Sinusoidal Symbol Tj Tstg TC -- -- -- VCC(surge) VCC(prot.) VRMS PM100CVA120 -20 to 150 -40 to 125 -20 to 100 17 17 730 1000 800 2500 Units C C C in-lb in-lb Grams Volts Volts Volts Control Sector Supply Voltage Applied between (VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC) Input Voltage Applied between (UP, VP, WP, UN, VN, WN) Fault Output Supply Voltage (Applied between FO-GND) Fault Output Current (Sink Current at FO Terminals) VD VCIN VFO IFO 20 20 20 20 Volts Volts Volts mA IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) Collector Current, (TC = 25C) Peak Collector Current, (TC = 25C) Collector Dissipation (TC = 25C) VCES IC ICP PC 1200 100 200 595 Volts Amperes Amperes Watts 432 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM100CVA120 IntellimodTM Module Three Phase IGBT Inverter Output 100 Amperes/1200 Volts Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Control Sector Short Circuit Trip Level Short Circuit Current Delay Time Over Temperature Protection (VD = 15V, Lower Arm) Supply Circuit Under Voltage Protection (-20C Tj 125C) Circuit Current SC toff(SC) OT OTr UV UVr ID VCIN(on) VCIN(off) IFO(H) IFO(L) Minimum Fault Output Pulse Width tFO -20C Tj 125C, VD = 15V VD = 15V Trip Level Reset Level Trip Level Reset Level VD = 15V, VCIN = 15V, VN1-VNC VD = 15V, VCIN = 15V, VXP1-VXPC Input ON Threshold Voltage Input OFF Threshold Voltage Fault Output Current Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN, VN, WN-VNC VD = 15V, VFO = 15V* VD = 15V, VFO = 15V* VD = 15V* 145 -- 100 85 11.5 -- -- -- 1.2 1.7 -- -- 1.0 -- 10 110 95 12.0 12.5 40 13 1.5 2.0 -- 10 1.8 -- -- 120 105 12.5 -- 55 18 1.8 2.3 0.01 15 -- Amperes S C C Volts Volts mA mA Volts Volts mA mA mS * Fault output is given only when the internal SC, OT, and UV protections circuits of either an upper-arm or a lower-arm device operate to protect it. 433 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM100CVA120 IntellimodTM Module Three Phase IGBT Inverter Output 100 Amperes/1200 Volts Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-Emitter Cutoff Current ICES VEC VCE(sat) VCE = VCES, VD = 15V, Tj = 25C VCE = VCES, VD = 15V, Tj = 125C FWDi Forward Voltage Collector-Emitter Saturation Voltage -IC = 100A, VD = 15V, VCIN = 15V VD = 15V, VCIN = 0V, IC = 100A, Pulsed, Tj = 25C VD = 15V, VCIN = 0V, IC = 100A, Pulsed, Tj = 125C Inductive Load Switching Times ton trr tC(on) toff tC(off) VD = 15V, VCIN = 0V ~ 15V VCC = 600V, IC = 100A, Tj = 125C 0.4 -- -- -- -- 0.9 0.2 0.4 2.4 0.7 2.3 0.3 1.0 3.4 1.2 S S S S S -- 2.75 3.35 Volts -- -- -- -- -- -- 2.50 2.65 1.0 10.0 3.50 3.30 mA mA Volts Volts Thermal Characteristics Characteristic Junction to Case Thermal Resistance Symbol Rth(j-c)Q Rth(j-c)D Contact Thermal Resistance Rth(c-f) Condition Each Inverter IGBT Each Inverter FWDi Case to Fin Per Module, Thermal Grease Applied Min. -- -- -- Typ. -- -- -- Max. 0.21 0.35 0.025 Units C/Watt C/Watt C/Watt Recommended Conditions for Use Characteristic Supply Voltage Symbol VCC VCE(surge) VD Input ON Voltage Input OFF Voltage Arm Shoot-Through Blocking Time VCIN(on) VCIN(off) tDEAD Condition Applied across P-N Terminals Applied across P-N Terminals Applied between VUP1-VUPC, VN1-VNC, VVP1-VVPC, VWP1-VWPC * Applied between UP, VP, WP, UN, VN, WN For IPM's each Input Signal 0.8 4.0 3.0 Volts Volts S Value 800 1000 15 1.5 Units Volts Volts Volts * With ripple satisfying the following conditions, dv/dt swing 5V/s, Variation 2V peak to peak. 434 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM100CVA120 IntellimodTM Module Three Phase IGBT Inverter Output 100 Amperes/1200 Volts COLLECTOR-EMITTER SATURATON VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(SAT), (VOLTS) SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER VOLTAGE, VCE(SAT), (VOLTS) OUTPUT CHARACTERISTICS (TYPICAL) 3.0 3.0 COLLECTOR CURRENT, IC, (AMPERES) 150 Tj = 25oC 2.0 2.0 100 VD = 17V 15 13 1.0 VD = 15V Tj = 25C Tj = 125C 1.0 IC = 100A Tj = 25C Tj = 125C 50 0 0 50 100 150 COLLECTOR CURRENT, IC, (AMPERES) 0 0 13 15 17 CONTROL SUPPLY VOLTAGE, VD, (VOLTS) 0 0 1.0 2.0 3.0 COLLECTOR-EMITTER VOLTAGE, VCE(sat), (VOLTS) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL) SWITCHING ENERGY, PSW(on), PSW(off), (mJ/PULSE) SWITCHING LOSS CHARACTERISTICS (TYPICAL) 101 SWITCHING TIMES, tc(on), tc(off), (s) 101 VCC = 600V VD = 15V Tj = 25C Tj = 125C 102 VCC = 600V VD = 15V Tj = 25C Tj = 125C PSW(off) PSW(on) PSW(on) PSW(off) SWITCHING TIMES, ton, toff, (s) 101 100 toff ton VCC = 600V VD = 15V Tj = 25C Tj = 125C 100 tc(off) tc(on) 100 10-1 101 102 COLLECTOR CURRENT, IC, (AMPERES) 103 10-1 101 102 COLLECTOR CURRENT, IC, (AMPERES) 103 10-1 101 102 COLLECTOR CURRENT, IC, (AMPERES) 103 REVERSE RECOVERY CURRENT VS. COLLECTOR CURRENT (TYPICAL) REVERSE RECOVERY CURRENT, Irr, (AMPERES) DIODE FORWARD CHARACTERISTICS CIRCUIT CURRENT VS. CARRIER FREQUENCY 101 REVERSE RECOVERY TIME, trr, (S) 103 102 DIODE FORWARD CURRENT, IE, (AMPERES) 150 VD = 15V Tj = 25C CIRCUIT CURRENT, ID, (mA) 100 Irr 102 100 N-SIDE 101 10-1 trr VCC = 600V VD = 15V Tj = 25C Tj = 125C 101 50 P-SIDE VD = 15V Tj = 25C Tj = 125C 10-2 101 102 COLLECTOR CURRENT, IC, (AMPERES) 100 103 100 0 1.0 2.0 0 3.0 0 10 20 30 DIODE FORWARD VOLTAGE, VEC, (VOLTS) CARRIER FREQUENCY, fC, (kHz) 435 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM100CVA120 IntellimodTM Module Three Phase IGBT Inverter Output 100 Amperes/1200 Volts OVER CURRENT TRIP LEVEL VS. SUPPLY VOLTAGE (TYPICAL) OVER CURRENT TRIP LEVEL TEMPERATURE DEPENDENCY (TYPICAL) FAULT OUTPUT PULSE WIDTH VS. TEMPERATURE (TYPICAL) SHORT CIRCUIT CURRENT TRIP LEVEL, (VD = 15V) = 1.0 1.2 Tj = 25C SHORT CIRCUIT CURRENT TRIP LEVEL, (Tj = 25C) = 1.0 1.2 1.2 FAULT OUTPUT PULSE WIDTH TRIP LEVEL, tFO (Tj = 25C) = 1.0 1.0 1.0 1.0 0.8 0.8 0.8 VD = 15V VD = 15V 0 0 13 15 17 CONTROL SUPPLY VOLTAGE, VD, (VOLTS) 0 -60 20 100 180 0 -60 20 100 180 JUNCTION TEMPERATURE, Tj, (C) JUNCTION TEMPERATURE, Tj, (C) CONTROL SUPPLY VOLTAGE TRIP-RESET LEVEL TEMPERATURE DEPENDENCY (TYPICAL) TRANSIENT IMPEDANCE, Zth(j-c), (NORMALIZED VALUE) SUPPLY CIRCUIT UNDER VOLTAGE PROTECTION TRIP RESET LEVEL, UVt, UVr, (VOLTS) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) TRANSIENT IMPEDANCE, Zth(j-c), (NORMALIZED VALUE) 15 VD = 15V UVt UVr 101 101 100 100 13 10-1 10-1 11 10-2 SINGLE PULSE STANDARD VALUE = Rth(j-c)Q = 0.21C/W 10-2 SINGLE PULSE STANDARD VALUE = Rth(j-c)D = 0.35C/W 0 -60 10-3 10-3 10-2 10-1 TIME, (s) 10-3 10-3 10-2 10-1 TIME, (s) 20 100 180 100 10 1 100 10 1 JUNCTION TEMPERATURE, Tj, (C) 436 |
Price & Availability of PM100CVA120
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |