 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 42106 OPERATIONAL AMPLIFIER DSCC DWG #5962-8762001 (Replacement for OP501, PA51) Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Features: * * * * Wide Supply Voltage Range (10 to 40 Volts) High Output Current (10A Peak) Small Size (TO-3, 8 Pins) Low Cost Applications: * * * * Valve and Actuator Control DC or AC Power Regulator Motor/Synchro Driver DC Servo Amplifier DESCRIPTION The 42106 is a high power, high voltage, high current, power operational amplifier and is a replacement for the PA51 & OPA501. They are designed to drive capacitive, inductive and sensitive loads. The devices are complete with current limiting using external resistors, and fabricated using hybrid techniques to maximize reliability, minimize size and give top performance. ABSOLUTE MAXIMUM RATINGS Power Supply Voltage (VCC) ................................................................................................................................. 40VDC Differential Input Voltage ......................................................................................................................................VCC -3V Common Mode Input Voltage .....................................................................................................................................VCC Operating Temperature Range (case) .................................................................................................... -55C to +125C Storage Temperature Range ................................................................................................................... -65C to +150C Output Current .................................................................................................................................................... 10A Peak Power Dissipation at TC = 25C ..................................................................................................................................97W Lead Temperature (Soldering < 10 sec)................................................................................................................. +300C Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/16/01 42106 OPERATIONAL AMPLIFIER DESC DWG #5962-8762001 Mechanical Configuration A B C SEATING PLANE D H G Q 2 1 8 3 J E K F 76 4 5 R Note: Leads in true position with 0.010" (0.25mm) R at MMC at seating plane Pin Numbers shown for reference only. Numbers may not be marked on package. INCHES DIM A B C D E F G H J K Q R MIN MAX 1.510 1.550 .745 .770 .260 .300 .038 .042 .080 .105 40 BASIC .500 BASIC 1.186 BASIC .583 BASIC .400 .500 .151 .161 .980 1.020 MILLIMETERS MIN MAX 38.35 39.37 18.92 19.56 6.60 7.62 0.97 1.07 2.03 2.67 40 BASIC 12.7 BASIC 30.12 BASIC 15.08 BASIC 10.16 12.70 3.84 4.09 24.89 25391 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 ELECTRICAL CONNECTIONS Output 1 + CL +VC +IN -IN -VC N.C. CL- Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/16/01 42106 OPERATIONAL AMPLIFIER DESC DWG #5962-8762001 ELECTRICAL CHARACTERISTICS TC = 25 C, VCC = 36 VDC unless otherwise specified PARAMETER Input Offset Voltage Input Offset Voltage vs Supply Input Offset Voltage vs Power Input Bias Current Input Bias Current vs Supply Input Offset Current Input Impendance Gain Bandwidth Product @ 1 MHz Power Bandwidth Phase Margin Common Mode Rejection Ratio Output Voltage SYMBOL VIO VIO (VCC) VIO (P) IB+, IBIB (VCC) II0 RIN GB PB Im CMRR V0 TEST CONDITIONS TC = 25C TC = -55C to +125C MIN TYP 35 20 MAX 5 40 UNIT mV uV/C V/V V/W TC = 25C TC = -55C to +125C TC = 25C TC = -55C to +125C .05 .02 .01 250 1 10 80 76 17 VCC - 8V VCC - 6V 20 nA nA/C nA/V nA nA/C M MHz kHz Degree dB dB V V V 3 Output Voltage Swing Open Loop Gain Slew Rate @ 20% of V0 V0 V0 AV SR Power Supply Quiescent Current VCC IS TC = 25C, I0 = 40VP-P, I0 = 8.0A -55C to +125C VICM = 15V TC = 25C TC = -55C to +125C VIN = 400 mVP-P square wave VCC = 22V RL = 75, RCL = 0 TC = 25C, I0 =10A I0 = 4A -55C to +125C RL = 250, f = 10HZ RL = 100, RCL = 0 VIN = 40 VP-P square wave f = 1kHz, V0 = 40 VP-P -55C to +125C TC = 25C 16 45 94 1.0 dB V/S 10 36 2.6 40 10 V mA Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/16/01 This datasheet has been download from: www..com Datasheets for electronics components. |
Price & Availability of 42106
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |