|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HI-SINCERITY MICROELECTRONICS CORP. Spec. No. : HA200216 Issued Date : 1998.04.08 Revised Date : 2002.08.27 Page No. : 1/4 H431AA/BA/CA AJDUSTABLE SHUNT REGULATOR Description The H431 series are three-terminal adjustable regulators with guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately TO-92 2.495 volts) and 36 volts with two external resistors. These devices have a typical dynamic output impedance of 0.2. Active output circuitry provides a very sharp turn-on characteristic, making these devices excellent replacement for zener diodes in many applications. Features * Programmable output voltage * Temperature coefficient is 50ppm/C typical * Temperature compensated for operation over * full temperature range * Low output noise voltage * Fast turn on response Classification Rank VREF A 2.4952% B 2.4951% C 2.4950.5% Absolute Maximum Ratings (Operating temperature range applies unless otherwise specified) Characteristics Cathode Voltage Cathode Current Range (Continuous) Reference Input Current Range Power Dissipation Operating Temperature Range Storage Temperature Range Symbol VKA IK IREF PD Topr Tstg Value 37 -100~+150 0.05~+10 770 0~+70 -65~+150 Unit V mA mA mW C C H431AA, H431BA, H431CA HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Functional Block Diagram & Symbol Functional Block Diagram : Cathode Reference VREF + Anode Spec. No. : HA200216 Issued Date : 1998.04.08 Revised Date : 2002.08.27 Page No. : 2/4 Symbol : Cathode Reference Anode Test Circuits IN IREF IZ VREF R2 VREF II VZ IN R1 II VZ IN VZ IREF IZ Fig1. Test Circuit for VZ=VREF Fig 2. Test Circuit for VZ>VREF Note : VZ=VREF(1+R1/R2)+IREFxR1 Fig3. Test Circuit for Off-State Current Electrical Characteristics ( Ta=25C unless otherwise specified ) Characteristics Symbol Test Conditions Reference Input Voltage H431AA VREF VKA=VREF, IK=10mA H431BA H431CA V =V , I =10mA Deviation of Reference Input Voltage VREF(dev) KA REF K Over-Temperature TminTaTmax IK=10mA, Ratio of Change in Reference Input VREF / VKA=10V-VREF Voltage to the Change in Cathode VKA IK=10mA, Voltage KKA=36V-10V IK=10mA, R1=10k, Reference Input Current IREF R2= Deviation of Reference Input Current I =10mA, R1=10k, IREF(dev) K Over Full Temperature Range R2=, Ta=Full Range Minimum Cathode Current for IK(min) VKA=VREF Regulation Off-State Cathode Current IK(off) VKA=36V, VREF=0 VKA=VREF, f1.0KHz Dynamic impedance ZKA IK=1 to 100mA Min Typ Max Unit 2.445 2.495 2.545 2.470 2.495 2.520 V 2.480 2.495 2.510 4 -1.4 -1.0 2 0.4 0.4 0.1 0.2 17 -2.7 -2.0 4 1.2 1.0 1.0 0.5 mV mV V uA uA mA uA H431AA, H431BA, H431CA HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Characteristics Curve Cathode Current & Cathode Voltage 150 125 0 Spec. No. : HA200216 Issued Date : 1998.04.08 Revised Date : 2002.08.27 Page No. : 3/4 Change in Reference Input Voltage & Cathode Voltage -5 -10 -15 -20 -25 -30 -35 -40 IK=10m TA=25C 75 50 25 0 -25 -50 -75 VKA=Vref TA=25C -3 -2 -1 0 1 2 3 4 -100 Change in Reference Input Voltage (mV) 100 Cathode Current (mA) 0 10 20 30 40 50 Cathode Voltage (V) Cathode Voltage (V) Dynamic Impedance & Frequence 100 Cathode Current & Cathode Voltage 1000 800 600 400 200 0 VKA=Vref TA=25C -200 -400 Impedance (ohm) 10 1 IK=10mA to 100mA TA=25C 0.1 1 10 100 1000 10000 Cathode Current (uA) -2 -1 0 1 2 3 Frequency (Hz) Cathode Voltage (V) Noise Voltage & Frequency 100 100 Small Signal Voltage Amplification & Frequency Noise Voltage (nV/Hz ) 1/2 10 Voltage Amplification (dB) VKA=Vref IK=10mA TA=25C 10 IK=10mA TA=25C 1 1000 1 10 100 1000 10000 100000 10000 100000 1000000 10000000 Frequency (Hz) Frequency (Hz) H431AA, H431BA, H431CA HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. TO-92 Dimension A B 1 2 3 Date Code Spec. No. : HA200216 Issued Date : 1998.04.08 Revised Date : 2002.08.27 Page No. : 4/4 2 Marking: H 431 A Control Code 3 C Style: Pin 1.Reference 2.Anode 3.Cathode D H I E F G 1 3-Lead TO-92 Plastic Package HSMC Package Code: A *: Typical DIM A B C D E F Inches Min. Max. 0.1704 0.1902 0.1704 0.1902 0.5000 0.0142 0.0220 *0.0500 0.1323 0.1480 Millimeters Min. Max. 4.33 4.83 4.33 4.83 12.70 0.36 0.56 *1.27 3.36 3.76 DIM G H I 1 2 3 Inches Min. Max. 0.0142 0.0220 *0.1000 *0.0500 *5 *2 *2 Millimeters Min. Max. 0.36 0.56 *2.54 *1.27 *5 *2 *2 Notes: 1.Dimension and tolerance based on our Spec. dated Apr. 25,1996. 2.Controlling dimension: millimeters. 3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 4.If there is any question with packing specification or packing method, please contact your local HSMC sales office. Material: * Lead: 42 Alloy; solder plating * Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: * All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC. * HSMC reserves the right to make changes to its products without notice. * HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. * HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: * Head Office (Hi-Sincerity Microelectronics Corp.) : 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C. Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454 * Factory 1: No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C Tel: 886-3-5983621~5 Fax: 886-3-5982931 H431AA, H431BA, H431CA HSMC Product Specification |
Price & Availability of H431CA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |