 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PC815 Serise PC815 Series .. s Features High Sensitivity, High Density Mounting Type Photocoupler s Applications g Lead forming type ( I type ) and taping reel type ( P type ) are also available. ( PC815I/PC815P ) gg TUV ( VDE0884 ) approved type is also available as an option. 1. High current transfer ratio 1. System appliances, measuring instruments ( CTR: MIN. 600% at I F = 1mA, V CE = 2V) 2. Industrial robots 2. High isolation voltage between input and 3. Copiers, automatic vending machines output 4. Signal transmission between circuits of ( Viso : 5 000V rms ) different potentials and impedances 3. Compact dual-in-line package PC815 : 1-channel type PC825 : 2-channel type PC835 : 3-channel type PC845 : 4-channel type 4. Recognized by UL file No. E64380 s Outline Dimensions Anode mark Anode mark ( Unit : mm ) Internal connection diagram 4 3 1 2 3 4 Anode Cathode Emitter Collector PC815 PC825 2.54 0.25 4 PC815 3 6.5 0.5 2.54 0.25 8 7 PC815 6 5 PC815 6.5 0.5 Internal connection diagram 8 7 6 5 1 2 0.9 0.2 1.2 0.3 1 2 1 234 0.9 0.2 1.2 0.3 9.66 0.5 2.7 0.5 1 2 3 4 1 2 5 6 3 4 7 8 Anode Cathode Emitter Collector 0.5TYP. 3.5 0.5 2.7 0.5 0.5TYP. 3.5 0.5 4.58 0.5 7.62 0.3 7.62 0.3 3.0 0.5 3.0 0.5 0.26 0.1 0.5 0.1 = 0 to 13 0.26 0.1 = 0 to 13 0.5 0.1 PC835 Anode mark 2.54 0.25 12 11 10 PC845 Internal connection diagram 12 11 10 9 87 6.5 0.5 Anode mark 16 15 Internal connection diagram 14 13 12 11 10 9 1 3 5 7 Anode 2 4 6 8 Cathode 9 11 13 15 Emitter 10 12 14 16 Collector 9 PC815 8 7 PC815 PC815 123 2.54 0.25 16 15 14 13 4 12 5 6 11 10 7 9 8 PC815 PC815 PC815 PC815 6 7 8 1 3.0 0.5 3.5 0.5 0.5TYP. 14.74 0.5 2.7 0.2 7.62 0.3 3.0 0.5 3.5 0.5 0.5TYP. 234 0.9 0.2 1.2 0.3 5 6.5 0.5 1 234 0.9 0.2 1.2 0.3 5 6 1 23 135 246 7 9 11 8 10 12 456 Anode Cathode Emitter Collector 19.82 0.5 2.7 0.5 7.62 0.3 0.26 0.1 0.5 0.1 = 0 to 13 0.26 0.1 0.5 0.1 = 0 to 13 " In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device. " PC815 Series s Absolute Maximum Ratings Parameter Forward current *1 Peak forward current Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Collector current Collector power dissipation Total power dissipation *2 Isolation voltage Operating temperature Storage temperature *3 Soldering temperature Symbol IF I FM VR P V CEO V ECO IC PC P tot V iso T opr T stg T sol Rating 50 1 6 70 35 6 80 150 200 5 000 - 30 to + 100 - 55 to + 125 260 ( Ta = 25C ) Unit mA A V mW V V mA mW mW V rms C C C Input Output *1 Pulse width<=100 s, Duty ratio : 0.001 *2 40 to 60% RH, AC for 1 minute *3 For 10 seconds s Electro-optical Characteristics Parameter Forward voltage Peak forward voltage Reverse current Terminal capacitance Collector dark current Current transfer ratio Collector-emitter saturation voltage Isolation resistance Floating capacitance Cut-off frequency Rise time Response time Fall time Symbol VF V FM IR Ct ICEO CTR V CE(sat) R ISO Cf fc tr tf Conditions IF = 20mA IFM = 0.5A VR = 4V V = 0, f = 1kHz VCE = 10V, I F = 0 IF = 1mA, V CE = 2V IF = 20mA, I C = 5mA DC500V, 40 to 60% RH V = 0, f = 1MHz VCE = 2V, I C = 2mA, R L = 100 V CE MIN. 600 5 x 10 10 1 = 2V, I C = 10mA, R L = 100 TYP. 1.2 30 0.8 10 11 0.6 6 60 53 ( Ta = 25C ) MAX. 1.4 3.0 10 250 10 - 6 7 500 1.0 1.0 300 250 Unit V V A pF A % V pF kHz s s Input Output Transfer characteristics Fig. 1 Forward Current vs. Ambient Temperature 60 Fig. 2 Collector Power Dissipation vs. Ambient Temperature 200 Collector power dissipation PC ( mW ) 50 Forward current I F ( mA ) 150 40 30 100 20 50 10 0 - 30 0 25 50 75 100 Ambient temperature Ta ( C ) 125 0 - 30 0 25 50 75 100 Ambient temperature Ta ( C ) 125 PC815 Series Fig. 3 Peak Forward Current vs. Duty Ratio 10 000 5 000 Peak forward current I FM ( mA ) 2 000 1 000 500 200 100 50 20 10 5 5 Fig. 4 Forward Current vs. Forward Voltage 500 200 Forward current IF ( mA ) 100 50 20 10 5 2 1 T a = 75C 50C 25C 0C - 25C Pulse width <=100s T a = 25C 10 -3 2 5 10 -2 2 5 10 -1 2 5 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Duty ratio Forward voltage V F ( V ) Fig. 5 Current Transfer Ratio vs. Forward Current 2 000 Current transfer ratio CTR ( % ) 1 800 1 600 1 400 1 200 1 000 800 600 400 200 0 0.1 V CE = 2V T a = 25C Fig. 6 Collector Current vs. Collector-emitter Voltage 100 90 80 Collector current I C ( mA ) I F = 10mA 70 60 50 40 2mA 30 20 10 1mA 5mA P C ( MAX. ) Ta = 25C 0.2 0.5 1 F 2 ( mA ) 5 10 0 0 Forward current I 1 2 3 Collector-emitter voltage V CE 4 (V) 5 150 I F = 1mA V CE = 2V Relative current transfer ratio ( % ) Collector-emitter saturation voltage VCE(sat) ( V ) Fig. 7 Relative Current Transfer Ratio vs. Ambient Temperature Fig. 8 Collector-emitter Saturation Voltage vs. Ambient Temperature 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 - 30 I F = 20mA I C = 5mA 100 50 0 - 30 0 25 50 75 100 0 25 50 a 75 ( C ) 100 Ambient temperature T a ( C ) Ambient temperature T PC815 Series Fig. 9 Collector Dark Current vs. Ambient Temperature 10 - 4 V CE = 10V 10 Collector dark current I CEO ( A ) -5 Fig.10 Response Time vs. Load Resistance 500 200 100 Response time ( s ) tf 50 20 td 10 5 ts V CE = 2V I C = 10mA T a = 25C tr 10 - 6 10 -7 10 - 8 10 10 10 10 -9 - 10 - 11 - 12 2 0 80 Ambient temperature T a ( C) 20 40 60 100 1 0.05 0.1 0.2 0.5 1 Load resistance RL ( k ) 2 - 30 Fig.11 Frequency Response Test Circuit for Response Time V CE = 2V I C = 2mA 0 Voltage gain A v ( dB ) T a = 25C Input RD VCC RL Output 90% - 10 RL = 10K 1k 100 td ts tr tf Input Output 10% - 20 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 Frequency f ( kHz ) Fig.12 Collector-emitter Saturation Voltage vs. Forward Current 8 7 I C = 0.5mA 1mA 6 5 4 3 2 30mA 1 0 50mA 3mA 5mA 7mA T a = 25C Test Circuit for Frepuency Response Collector-emitter Saturation Voltage VCE (sat) (V) VCC RL RD Output 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 q Please refer to the chapter Forward current I F ( mA ) " Precautions for Use " Application Circuits NOTICE qThe circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. qContact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. qObserve the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). qContact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. qIf the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. qThis publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. qContact and consult with a SHARP representative if there are any questions about the contents of this publication. 115 |
Price & Availability of PC825
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |