View AZ2800_403506.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ2800
4U 30 AMP MINIATURE et POWER RELAY he FEATURES aS * 30 Amp switching capability at configuration * DPST-NO and DPDT .D * Meets 8 mm creepage, 4 kV dielectric w * Meets Class F construction w * Epoxy sealed version available * UL/CUR file E44211 w
CONTACTS
Arrangement Ratings DPST-N.O. DPDT Resistive load:
om .c
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time
Max. switched power: 560 W or 8310 VA Max. switched current:30 A (N.O.), 3 A (N.C.) Max. switched voltage: 600 VAC or 30 VDC* UL, CUR (N.O.) 30 A at 277 VAC General Use, 100k cycles 1 Hp at 120 VAC, 100k cycles 2.5 Hp at 240 VAC, 100k cycles 110 LRA/25.3 FLA at 240 VAC (DC coils only), 100k cycles 3 A at 277 VAC General Use, 100k cycles
*Note: If switching voltage is greater than 30VDC, special precautions must be taken. Please contact the factory.
Release Time
UL, CUR (N.C.)
Material Resistance
Silver alloy <50 milliohms initially (6 V, 1 A voltage drop method)
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature DC: 0.925 W AC: 2.6 VA
DC: 5.0 W at 20C (68F) AC: 7.0 VA at 20C (68F) DC: 48C (86F) at nominal coil voltage AC: 68 C (122F) at nominal coil voltage Max. 155C (311F)
w
w
.D w
t a
S a
e h
Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil 2000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 109 ohms minimum at 500 VDC DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage At nominal coil voltage DC: -40C (-40F) to 85C (185F) AC: -40C (-40F) to 65C (149F) -40C (-40F) to 155C (311F) 0.062" DA at 10-55 Hz Operational, 10 g for 11 ms 1/2 sine pulse (no contact opening > 100usec) Non-destructive, 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Quick connect tabs 80C (176F) 30 seconds 86 grams
t e
U 4
Minimum operations 5 x 107 1 x 105 at rated load
.c
m o
15 ms typical 25 ms maximum with bounce 10 ms typical 25 ms maximum with bounce (with no coil suppression)
Enclosure Terminals Max. Solvent Temp. Max. Immersion Time Weight
NOTES
1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice.
w
w
w
.D
a
aS t
ee h
4U t
om .c
8/16/00W
AZ2800
RELAY ORDERING DATA
COIL SPECIFICATIONS - DC Coil
Nominal Coil VDC 6 12 24 48 110 Must Operate VDC 4.5 9.0 18.0 36.0 82.5 Max. Continuous VDC 10.5 20.7 41.8 83.4 190.5 Coil Resistance 10% 22 86 350 1390 7255
ORDER NUMBER*
AZ2800-2C-6D AZ2800-2C-12D AZ2800-2C-24D AZ2800-2C-48D AZ2800-2C-110D
COIL SPECIFICATIONS - AC Coil
Nominal Coil VAC 12 24 120 208 240 277 Must Operate VAC 9.6 19.2 96.0 166.4 192.0 221.6
50/60 Hz
Max. Continuous VAC 15.6 31.2 156.0 270.4 312.0 360.1 Nominal Current mA 10% 340.0 166.0 33.3 19.2 16.7 14.4 Coil Resistance 10% 9.5 52 1390 3800 5200 7255
ORDER NUMBER*
AZ2800-2C-12A AZ2800-2C-24A AZ2800-2C-120A AZ2800-2C-208A AZ2800-2C-240A AZ2800-2C-277A
*Add suffix "E" for epoxy sealed version. Add suffix "K" for 0.187 QC coil terminals. Substitute "2A" for "2C" to indicate DPST (N.O.) contacts. NOTE: 12 VAC coil UL Approval pending.
MECHANICAL DATA
.58 [14.8]
.31 [8.0]
WIRING DIAGRAM
.63 [16.0]
.18 [4.6] 1.00 [25.4] 6 x.250 [6.35] 1.62 [41.1] 2.35 [59.7] 1.04 [26.4]
1.36 [34.5]
2 4 3
0
.15 [3.8]
6
8
7 1
2 FORM C
8 x.032 [.81]
2 x DIM "A"
DIM. "A" = .250 [6.35] - STANDARD
8 x.45 [11.4]
0 2 4
DIM. "A" = .187 [4.75] - "K" SUFFIX
6
8 1
.13 [3.3]
2 FORM A
2.69 [68.4]
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
8/16/00W

▲Up To Search▲

Price & Availability of AZ2800

	To Download AZ2800 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .