View STD36NH02L_381840.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STD36NH02L
N-channel 24V - 0.011 - 30A - DPAK STripFETTM III Power MOSFET
General features
Type STD36NH02L VDSS 24V RDS(on) <0.0145 ID 30A (1)
1. Guaranteed when external Rg=4.7 and tf < tfmax
RDS(on) * Qg industry's benchmark Conduction losses reduced Switching losses reduced
3 1
TO-252
Description
This series of products utilizes the last advanced design rules of ST's proprietary STripFETTM technology. This is suitable for the most demanding DC-DC converter application where high efficiency is to be achieved.
Internal schematic diagram
Applications
Switching application
Order codes
Part number STD36NH02L Marking D36NH02L Package DPAK Packaging Tape & reel
April 2006
Rev 1
1/13
www.st.com 13
Contents
STD36NH02L
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................ 6
3 4 5 6
Test circuit
................................................ 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2/13
STD36NH02L
Electrical ratings
1
Electrical ratings
Table 1.
Symbol Vspike (1) VDS VGS ID(2) ID IDM
(3)
Absolute maximum ratings
Parameter Drain-source voltage rating Drain-Source Voltage (V GS = 0) Gate-Source Voltage Drain Current (continuous) at T C = 25C Drain Current (continuous) at T C=100C Drain Current (pulsed) Total Dissipation at T C = 25C Derating Factor Value 30 24 20 30 30 120 45 0.27 200 -55 to 175 Unit V V V A A A W W/C mJ C
PTOT
(4)
EAS TJ
Single pulse avalanche energy Operating Junction Temperature Storage Temperature
Tstg
1. Guaranteed when external Rg=4.7 and tf < tfmax 2. Value limited by wire bonding 3. Pulse width limited by safe operating area. 4. Starting Tj=25C, ID=19A, VDD =18V
Table 2.
Symbol Rthj-case Rthj-amb Tl
Thermal resistance
Parameter Thermal resistance junction-case Max Thermal resistance junction-ambient Max Maximum lead temperature for soldering purpose Value 3.33 100 275 Unit C/W C/W C
3/13
Electrical characteristics
STD36NH02L
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol V(BR)DSS IDSS
On/off states
Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate Threshold Voltage Static Drain-Source On Resistance Test condictions ID = 1mA, VGS= 0 VDS = 20V, VDS = 20V @125C VGS = 20V VDS= V GS, ID = 250A VGS= 10V, ID= 15A VGS= 5V, ID= 15A 1 1.8 0.011 0.013 Min. 24 1 10
100
Typ.
Max.
Unit V A A nA V
IGSS VGS(th) RDS(on)
2.5 0.0145 0.026
Table 4.
Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Q OSS (2) RG
Dynamic
Parameter Forward transconductance Input capacitance Output Capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Output charge Test condictions VDS =10V, ID = 15A VDS =15V, f=1 MHz, VGS=0 0.44V < V DD < 10V, ID = 30A, VGS =10V (see Figure 14) VDS=16V, VGS=0 f=1 MHz Gate DC Bias = 0 Test signal level = 20mV open drain Min. Typ. 18 860 255 45 15.5 4.1 1.7 6 20 Max. Unit S pF pF pF nC nC nC ns
Gate input resistance
3
1. Pulsed: pulse duration=300s, duty cycle 1.5% 2. Qoss = C oss* VIN, C oss = C gd+C ds
4/13
STD36NH02L Table 5.
Symbol td(on) tr td(off) tf
Electrical characteristics Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test condictions VDD =10V, ID= 15A, RG=4.7, VGS=10V (see Figure 13) Min Typ. 8 70 22 15 Max Unit ns ns ns ns
Table 6.
Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 15A, VGS = 0 ISD = 30A,di/dt = 100A/s, VDD=15V, Tj=150C (see Figure 15) 24 16 1.3 Test condictions Min Typ. Max 30 120 1.5 Unit A A V ns nC A
1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5%
5/13
Electrical characteristics
STD36NH02L
2.1
Figure 1.
Electrical characteristics (curves)
Safe operating area Figure 2. Thermal impedance
Figure 3.
Output characterisics
Figure 4.
Transfer characteristics
Figure 5.
Transconductance
Figure 6.
Static drain-source on resistance
6/13
STD36NH02L Figure 7. Gate charge vs gate-source voltage Figure 8.
Electrical characteristics Capacitance variations
Figure 9.
Normalized gate threshold voltage vs temperature
Figure 10. Normalized on resistance vs temperature
Figure 11. Source-drain diode forward characteristics
Figure 12. Normalized BVDSS vs temperature
7/13
Test circuit
STD36NH02L
3
Test circuit
Figure 14. Gate charge test circuit
Figure 13. Switching times test circuit for resistive load
Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit
Figure 17. Unclamped inductive waveform
Figure 18. Switching time waveform
8/13
STD36NH02L
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at:: www.st.com
9/13
Package mechanical data
STD36NH02L
DPAK MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 5.1 6.4 4.7 2.28 4.4 9.35 1 2.8 0.8 0.6 0.2 0 8 0 1 0.023 0.008 8 4.6 10.1 0.173 0.368 0.039 0.110 0.031 0.039 6.6 0.252 0.185 0.090 0.181 0.397 TYP MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.200 0.260 TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 inch
0068772-F
10/13
STD36NH02L
Packaging mechanical data
5
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W
BASE QTY 2500
mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40
15.7 16.3
inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574
0.618 0.641
MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1
11/13
Revision history
STD36NH02L
6
Revision history
Table 7.
Date 27-Apr-2006
Revision history
Revision 1 First Release Changes
12/13
STD36NH02L
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
13/13

▲Up To Search▲

Price & Availability of STD36NH02L

	To Download STD36NH02L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .