|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
RHRP640CC, RHRP650CC, RHRP660CC January 1998 File Number 4464 6A, 400V - 600V Hyperfast Dual Diodes RHRP640CC, RHRP650CC and RHRP660CC are hyperfast dual diodes with soft recovery characteristics (t rr < 30ns). They have half the recovery time of ultrafast diodes and are silicon nitride passivated ion-implanted hepaticas planar construction. These devices are intended for use as freewheeling/clamping diodes and rectifiers in a variety of switching power supplies and other power switching applications. Their low stored charge and ultrafast soft recovery minimize ringing and electrical noise in many power switching circuits reducing power loss in the switching transistors. Formerly developmental type TA49057. Features * Hyperfast with Soft Recovery . . . . . . . . . . . . . . . .<30ns * Operating Temperature . . . . . . . . . . . . . . . . . . . . 175oC * Reverse Voltage Up To . . . . . . . . . . . . . . . . . . . . . . .600V * Avalanche Energy Rated * Planar Construction * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards" Applications * Switching Power Supplies BRAND RHRP640C RHRP650C RHRP660C Ordering Information PART NUMBER RHRP640CC RHRP650CC RHRP660CC PACKAGE TO-220AB TO-220AB TO-220AB * Power Switching Circuits * General Purpose Symbol K NOTE: When ordering, use the entire part number. A1 A2 Package JEDEC TO-220AB ANODE 2 CATHODE ANODE 1 CATHODE (FLANGE) 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 1999 RHRP640CC, RHRP650CC, RHRP660CC Absolute Maximum Ratings (Per Leg) TC = 25oC, Unless Otherwise Specified RHRP640CC 400 400 400 6 12 60 50 10 -65 to 175 300 260 RHRP650CC 500 500 500 6 12 60 50 10 -65 to 175 300 260 RHRP660CC 600 600 600 6 12 60 50 10 -65 to 175 300 260 UNITS V V V A A A W mJ oC oC oC Peak Repetitive Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRRM Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VR Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . IF(AV) TC = 152oC Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM Square Wave, 20kHz Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM Halfwave, 1 phase, 60Hz Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PD Avalanche Energy (See Figures 10 and 11). . . . . . . . . . . . . . . . . . . . . EAVL Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .TSTG,TJ Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, see Tech Brief 334. . . . . . . . . . . . . . . . . . . . Tpkg CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Specifications (Per Leg) TC = 25oC, Unless Otherwise Specified RHRP640CC RHRP650CC MAX 2.1 1.7 100 500 30 35 3 MIN TYP 16 8.5 45 20 MAX 2.1 1.7 100 500 30 35 3 MIN RHRP660CC TYP 16 8.5 45 20 MAX 2.1 1.7 100 500 30 35 3 UNITS V V A A A A A A ns ns ns ns nC pF oC/W SYMBOL VF TEST CONDITION IF = 6A IF = 6A, TC = 150oC MIN - TYP 16 8.5 45 20 - IR VR = 400V VR = 500V VR = 600V VR = 400V, TC = 150oC VR = 500V, TC = 150oC VR = 600V, TC = 150oC trr IF = 1A, dIF/dt = 200A/s IF = 6A, dIF/dt = 200A/s ta tb QRR CJ RJC DEFINITIONS IF = 6A, dIF/dt = 200A/s IF = 6A, dIF/dt = 200A/s IF = 6A, dIF/dt = 200A/s VR = 10V, IF = 0A VF = Instantaneous forward voltage (pw = 300s, D = 2%). IR = Instantaneous reverse current. trr = Reverse recovery time (See Figure 9), summation of ta + tb. ta = Time to reach peak reverse current (See Figure 9). tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 9). QRR = Reverse recovery charge. CJ = Junction Capacitance. RJC = Thermal resistance junction to case. pw = pulse width. D = duty cycle. 2 RHRP640CC, RHRP650CC, RHRP660CC Typical Performance Curves 30 1000 175oC IR, REVERSE CURRENT (A) IF, FORWARD CURRENT (A) 100 100oC 10 10 1 175oC 1.0 0.5 0 0.5 100oC 25oC 0.1 25oC 1.0 1.5 2.0 2.5 3.0 0.01 0 100 200 300 400 500 600 VF, FORWARD VOLTAGE (V) VR , REVERSE VOLTAGE (V) FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE 30 25 t, RECOVERY TIMES (ns) TC = 25oC, dIF/dt = 200A/s 50 TC = 100oC, dIF/dt = 200A/s t, RECOVERY TIMES (ns) 40 trr 30 20 15 10 trr ta 20 ta tb tb 5 0 0.5 10 1 IF, FORWARD CURRENT (A) 6 0 0.5 1 IF, FORWARD CURRENT (A) 6 FIGURE 3. trr, ta AND tb CURVES vs FORWARD CURRENT 75 FIGURE 4. trr, ta AND tb CURVES vs FORWARD CURRENT IF(AV), AVERAGE FORWARD CURRENT (A) TC = 175oC, dIF/dt = 200A/s 6 5 DC 4 SQ. WAVE 3 2 1 0 140 t, RECOVERY TIMES (ns) 60 trr 45 30 ta tb 15 0 0.5 1 IF, FORWARD CURRENT (A) 6 145 150 155 160 165 170 175 TC , CASE TEMPERATURE (oC) FIGURE 5. trr, ta AND tb CURVES vs FORWARD CURRENT FIGURE 6. CURRENT DERATING CURVE 3 RHRP640CC, RHRP650CC, RHRP660CC Typical Performance Curves 50 CJ , JUNCTION CAPACITANCE (pF) (Continued) 40 30 20 10 0 0 50 100 150 200 VR , REVERSE VOLTAGE (V) FIGURE 7. JUNCTION CAPACITANCE vs REVERSE VOLTAGE Test Circuits and Waveforms VGE AMPLITUDE and RG CONTROL dIF/dt t1 AND t2 CONTROL IF L DUT RG CURRENT SENSE + VDD 0 IF dIF dt ta trr tb IGBT VGE t1 t2 - 0.25 IRM IRM FIGURE 8. trr TEST CIRCUIT FIGURE 9. trr WAVEFORMS AND DEFINITIONS L = 20mH R < 0.1 EAVL = 1/2LI2 [VR(AVL) /(VR(AVL) - VDD)] Q1 = IGBT (BVCES > DUT VR(AVL)) L CURRENT SENSE Q1 R + VDD IL VAVL IL DUT VDD - IV t0 t1 t2 t FIGURE 10. AVALANCHE ENERGY TEST CIRCUIT FIGURE 11. AVALANCHE CURRENT AND VOLTAGE WAVEFORMS 4 RHRP640CC, RHRP650CC, RHRP660CC TO-220AB 3 LEAD JEDEC TO-220AB PLASTIC PACKAGE A OP Q H1 D E1 45o D1 TERM. 4 E A1 INCHES SYMBOL A A1 b b1 c D D1 E E1 e e1 MIN 0.170 0.048 0.030 0.045 0.014 0.590 0.395 MAX 0.180 0.052 0.034 0.055 0.019 0.610 0.160 0.410 0.030 0.100 TYP 0.200 BSC 0.235 0.100 0.530 0.130 0.149 0.102 0.255 0.110 0.550 0.150 0.153 0.112 MILLIMETERS MIN 4.32 1.22 0.77 1.15 0.36 14.99 10.04 MAX 4.57 1.32 0.86 1.39 0.48 15.49 4.06 10.41 0.76 2.54 TYP 5.08 BSC 5.97 2.54 13.47 3.31 3.79 2.60 6.47 2.79 13.97 3.81 3.88 2.84 NOTES 3, 4 2, 3 2, 3, 4 5 5 6 2 - L1 b1 b c L 60o 1 2 3 e e1 J1 H1 J1 L L1 OP Q NOTES: 1. These dimensions are within allowable dimensions of Rev. J of JEDEC TO-220AB outline dated 3-24-87. 2. Lead dimension and finish uncontrolled in L1. 3. Lead dimension (without solder). 4. Add typically 0.002 inches (0.05mm) for solder coating. 5. Position of lead to be measured 0.250 inches (6.35mm) from bottom of dimension D. 6. Position of lead to be measured 0.100 inches (2.54mm) from bottom of dimension D. 7. Controlling dimension: Inch. 8. Revision 2 dated 7-97. All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 5 |
Price & Availability of RHRP640CC |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |