![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Solid State Relay Low cost Subminiature PCB mounting 2 amp Single in-line package (SIP) SSR s s s s s G3MB Bottom is approximately 3 times smaller than G3M Low cost "SIP" package switches up to 2A loads Built in Snubber circuit and input resistor as option Two footprints available for design flexibility The G3MB-202PEG-4-DC20MA crosses directly to the Motorola M0C2A-60 series power triac Ordering Information To Order: Specify input voltage at end of part number. Example: G3MB-202P-DC24 Isolation Output terminal pitch 7.62 mm Zero cross Yes Input resistor Yes Built-in snubber circuit Yes Rated output load 2 A at 100 to 240 VAC Rated input voltage 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC N/A *(See Note) N/A *(See Note) Part number Phototriac G3MB-202P No 2 A at 100 to 240 VAC G3MB-202PL 5.08 mm Yes 2 A at 100 to 240 VAC G3MB-202P-4 No 2 A at 100 to 240 VAC G3MB-202PL-4 Yes No No No 2 A at 100 to 240 VAC 2 A at 100 to 240 VAC G3MB-202PEG-4-DC20MA G3MB-202PLEG-4-DC20MA Note: 1. For versions without input voltage specified, a current limiting resistor must be placed in series with the input. See LED drive specifications and recommendations below. 2. TUV versions available. Contact your local Omron representative. G3MB G3MB Specifications s INPUT RATING Models with input resistor Rated voltage 5 VDC 12 VDC 24 VDC Operating range 4 to 6 VDC 9.60 to 14.40 VDC 19.20 to 28.80 VDC Input impedance 440 20% 1k , 20% 2.20k , 20% s OUTPUT RATING Model G3MB-202 Rated load voltage 100 to 240 VAC Load voltage range 75 to 264 VAC Load current 0.10 to 2 A Surge current 30 A (60 Hz, 1 cycle) s LED DRIVE DATA Models without input resistor LED forward current Repetitive peak LED forward current LED reverse voltage 50 mA max. 1 A max. 5 V max. s RECOMMENDED LED OPERATING CONDITIONS Models without input resistor Min. 5 mA 0 Standard 10 mA -- Max. 20 mA 1V LED forward current Must drop voltage s CHARACTERISTICS Type Operate time Release time Output ON voltage drop Leakage current Non-repetitive peak surge Output PIV (VDRM) di/dt dv/dt I 2t Junction temperature (Tj) Insulation resistance Dielectric strength Vibration Malfunction Shock Malfunction Ambient temperature Operating Storage Humidity Operating Weight Note: Data shown are of initial value. G3MB-202P G3MB-202PL G3MB-202PEG G3MB-202PLEG 1/2 of load power source 1 ms max. cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 1.60 V (RMS) max. 1 mA max. at 100 VAC, 1.50 mA at 200 VAC 30 A 600 V 40 A/s 100 V/s 4 A 2s 125C (257F) max. 1,000 M min. at 500 VDC 2500 VAC, 50/60 Hz for 1 minute; 3750 VAC max., 1 second 10 to 55 Hz, 0.75 mm (0.03 in) double amplitude, approx. 5 G Approx. 100 G -30 to 80C (-22 to 176F) with no icing -30 to 100C (-22 to 212F) with no icing 45% to 85% RH Approx. 5 g (0.18 oz) 2 G3MB s CHARACTERISTIC DATA Load current vs. ambient temperature characteristics 2.5 G3MB Inrush current resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) 40 Switching current (A) 2.0 1.5 Inrush current (A Peak) 30 20 1.0 0.5 10 0 -40 -20 0 20 25 40 60 80 100 0 10 100 30 50 100 300 500 1,000 Switching current (A) 5,000 10,000 Ambient temperature C Dimensions Unit: mm (inch) s RELAYS PCB Dimensions (Bottom view) G3MB Four 1.0 (0.04) dia. 20.5 (0.81) max. 2.54 (0.1) 2.54 (0.1) 3.9 (0.15) 2.54 (0.10) 24.5 (0.96) max. 7.62 (0.30) 0.7 (0.03) 1.4 (0.06) 0.4 (0.02) G3MB (-4) Four 1.0 (0.04) dia. 5.5 (0.22) max 2.54 (0.1) 2.54 (0.1) Terminal Arrangement/ Internal Connections (Bottom view) 4 (-) 3 (+) 2 1 INPUT LOAD 3 G3MB s APPROVALS UL (File No. E64562) SSR Type G3MB-102P Input voltage 5 to 24 VDC Load type General purpose Tungsten Motor General purpose Tungsten Motor Load ratings 2 A, 120 VAC 1 A, 120 VAC 1.60 FLA/9.60 LRA, 120 VAC 2 A, 240 VAC 1 A, 240 VAC 1.60 FLA/9.60 LRA, 240 VAC G3MB G3MB-202P G3MB-202PL G3MB-202PEG G3MB-202PLEG CSA (File No. LR35535-274) SSR Type G3MB-102P Input voltage 5 to 24 VDC G3MB-202P G3MB-202PL Load type General purpose Tungsten Motor General purpose Tungsten Motor Load ratings 2 A, 120 VAC 1 A, 120 VAC 1.60 FLA/8.60 LRA, 120 VAC 2 A, 240 VAC 1 A, 240 VAC 1.60 FLA/8.60 LRA, 240 VAC Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics individually defined in this catalog. 2. In the interest of product improvement, specifications are subject to change. Precautions See General Information Section near the front of this catalog for Solid State Precautions. NOTE: DIMENSIONS ARE SHOWN IN MILLIMETERS. To convert millimeters to inches divide by 25.4. OMRON ELECTRONICS, INC. One East Commerce Drive Schaumburg, IL 60173 OMRON CANADA, INC. 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON Cat. No. GC RLY7 01/00 Specifications subject to change without notice. 416-286-6465 Printed in the U.S.A. 4 |
Price & Availability of G3MB-202P
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |