 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RFS P2023 2.4 GHz 802.11b/g WLAN Power Amplifier Data Sheet - Rev 2.3 FEATURES * * * * * * <3% EVM, 145 mA @ POUT = +19 dBm with IEEE 802.11g Modulation at 54 Mbps -38 dBc ACPR 1st Sidelobe at +23 dBm with IEEE 802.11b Modulation at 11 Mbps -54 dBc ACPR 2nd Sidelobe at +23 dBm with IEEE 802.11b Modulation at 11 Mbps No RF Matching Required 34 dB of Linear Power Gain Temperature-Compensated Linear Power Detector APPLICATIONS * * * IEEE 802.11 b/g WLAN 2.4 GHz Cordless Phones 2.4 GHz ISM Equipment S28 Package 16 Pin 3 mm x 3 mm x 0.9 mm LPCC PRODUCT DESCRIPTION The RFS P2023 power amplifier is a high performance InGaP HBT IC designed for transmit applications in the 2.4-2.5 GHz band. The part is matched at the input and output so no additional RF matching components are required off-chip. The VCC1 NC PA exhibits unparalleled linearity and efficiency for both 802.11g and 802.11b WLAN systems. The power detector is temperature compensated on chip enabling a single-ended output voltage. The part is biased by a single +3.3 V supply. VCC2 VCC3 13 16 15 14 GND 1 Bias Network 12 GND RF IN 2 Input Match Output Match 11 RF OUT GND 3 10 GND VPC1 4 Bias Network Power Detector 9 DETDC1 5 6 7 8 Figure 1: Block Diagram and Pinout 04/2005 DETOUT VBC DETDC2 VPC2/3 RFS P2023 Table 1: Pin Description P IN 1 2 3 4 5 6 7 8 N AM E GND RFIN GND V PC1 V BC VPC2/3 DETDC2 DETOUT D E S C R IP T ION Ground RF Input Ground Power Control 1 Bi as Ci rcui t Voltage Power Control 2/3 Detector Bi as 2 Power Detector Output P IN 9 10 11 12 13 14 15 16 N AM E DETDC1 GND RFOUT GND V CC3 V CC2 NC V CC1 D E S C R IP T ION Detector Bi as 1 Ground RF Output Ground Supply Voltage Supply Voltage No Connect Supply Voltage 2 Data Sheet - Rev 2.3 04/2005 RFS P2023 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PAR AME T E R DC Power Supply (VCC1, VCC2, VCC3) MIN M AX 4.0 U N IT V Appli ed to seri es resi stors external to VPC pi ns. No RF si gnal appli ed. C OMME N T S Power Control Level (VPC1, VPC2/3) 4.0 V DC Current Consumpti on RF Input Level (RFIN) Operati ng Ambi ent Temperature Storage Temperature 0 -55 400 -5 +85 +150 mA dBm C C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER Operating Frequency Supply Voltage (VCC1, VCC2, VCC3) Power Control Voltage (VPC1, VPC2/3) MIN 2400 3.0 - TYP 3.3 3.3 MAX 2500 3.6 - UNIT MHz V V COMMENTS 0 - 0.5 V PAON. Applied to series resistors external to VPC pins. PASHUTDOWN. Applied to series resistors external to VPC pins. The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Data Sheet - Rev 2.3 04/2005 3 RFS P2023 Table 4: IEEE 802.11g Modulation, 54 Mbps OFDM (VCC = 3.3 V, VPC = 3.3 V, POUT = +19 dBm, +25 C) PAR AME T E R Power Gai n Gai n Ri pple Current Consumpti on Error Vector Magni tude (EVM) Power Detector Voltage Detector Sensi ti vi ty Detector Output Impedance Notes: 1. EVM includes noise floor of 1% (-40 dB). MIN 31.5 T YP 34.5 M AX 37.0 0.75 U N IT dB dB mA % dB V mV/dB KV C OMME N T S POUT = +19 dBm 145 2.8 -31 0.50 0.60 75 1 165 4.0 -28 0.70 POUT = +19 dBm POUT = +19 dBm POUT = +19 dBm POUT = +19 dBm, 1KV Load Table 5: IEEE 802.11b Modulation,11 Mbps DSSS, CCK (VCC = 3.3 V, VPC = 3.3 V, POUT = +21 dBm, +25 C) PARAMETER Power Gain Gain Ripple Current Consumption ACPR - 1st Sidelobe (11 MHz Offset) ACPR - 2nd Sidelobe (22 MHz Offset) Power Detector Voltage Detector Sensitivity Detector Output Impedance 1 0.7 175 -38 -54 0.8 75 MIN 31.5 TYP 34.5 MAX 37.0 0.75 195 -33 -53 0.9 UNIT dB dB mA dB c dB c V mV/dB K8 POUT = +21dBm POUT = +21 dBm; 1,2,5.5,11 Mbps POUT = +21 dBm; 1,2,5.5,11 Mbps POUT = +21 dBm, 1K8 Load COMMENTS POUT = +21 dBm 4 Data Sheet - Rev 2.3 04/2005 RFS P2023 Table 6: Continuous Wave Signal (VCC = 3.3 V, VPC = 3.3 V, +25 C) PARAMETER P 1 dB Harmonics 2fo 3fo Stability Input Return Loss Output Return Loss Output Noise Power Reverse Isolation Shutdown Current Quiescent Current TON Setting Time TOFF Setting Time MIN 25.0 TYP 26.5 -20 -25 5:1 -7 -12 MAX 28.0 -16 -20 UNIT dB m COMMENTS dB c Pout = +25 dBm -4 -9 130 dB dB dBm/Hz dB 40 1 30 45 60 1 1 A mA S S Settles within 0.5 dB Data Sheet - Rev 2.3 04/2005 5 RFS P2023 PERFORMANCE DATA Figure 2: Gain, Current, EVM vs. Output Power at 2.412 GHz, 3.3 V (IEEE 802.11g @ 54 Mbps) 40 400 Figure 3: Gain, Current vs. Output Power at 2.412 GHz, 3.3 V (IEEE 802.11b Signal @ 11 Mbps) 40 35 Gain +25C 30 25 Gain +70C Gain 0C Current +25C 20 15 Current Gain 400 350 300 250 200 150 100 50 0 16 17 18 19 20 21 22 23 35 Gain +25C Gain +70C Gain 0C EVM +25C EVM +70C 20 EVM 0C Current +25C 15 Current +70C Current 0C Current Gain 350 30 300 Gain (dB), EVM (%) 200 Current +70C Current 0C 150 10 EVM 100 10 5 0 5 50 0 12 13 14 15 16 17 18 19 20 21 0 Output Power (dBm) Output Power (dBm) Figure 4: Gain, Current, EVM vs. Output Power at 2.437 GHz, 3.3 V (IEEE 802.11g @ 54 Mbps) 40 400 Figure 5: Gain, Current vs. Output Power at 2.437 GHz, 3.3 V (IEEE 802.11b Signal @ 11 Mbps) 40 35 Gain +25C 30 25 Gain +70C Gain 0C Current +25C 20 15 Current Gain 400 350 300 250 200 150 100 50 0 16 17 18 19 20 21 22 23 35 Gain 350 30 Gain +25C Gain +70C Gain 0C EVM +25C EVM +70C EVM 0C Current +25C 300 Gain (dB), EVM (%) Current (mA) 20 200 Current +70C Current 0C 15 Current +70C Current 0C Current 150 10 EVM 100 10 5 0 5 50 0 12 13 14 15 16 17 18 19 20 21 0 Output Power (dBm) Output Power (dBm) Figure 6: Gain, Current, EVM vs. Output Power at 2.462 GHz, 3.3 V (IEEE 802.11g @ 54 Mbps) 40 35 30 Gain +25C Gain +70C Gain 0C EVM +25C EVM +70C EVM 0C Current +25C Current +70C Current 0C Gain Figure 7: Gain, Current vs. Output Power at 2.462 GHz, 3.3 V (IEEE 802.11b Signal @ 11 Mbps) 400 350 300 250 200 150 100 50 0 40 35 Gain +25C 30 25 Gain +70C Gain 0C Current +25C 20 15 10 5 0 16 17 18 19 20 21 22 23 Current +70C Current 0C Current Gain 400 350 300 250 200 150 100 50 0 Gain (dB), EVM (%) Current (mA) 20 15 10 5 0 12 13 Current EVM 14 15 16 17 18 19 20 21 Output Power (dBm) Output Power (dBm) 6 Data Sheet - Rev 2.3 04/2005 Current (mA) 25 Gain (dB) Current (mA) 25 250 Gain (dB) Current (mA) Current (mA) 25 250 Gain (dB) RFS P2023 Figure 8: Power Detector Voltage vs. Output Power at 2.412 GHz, 3.3 V (IEEE 802.11g @ 54 Mbps) 0.8 0.7 0.6 Det Volt. +25C Det Volt. +70C Det Volt. 0C Figure 9: Power Detector Voltage vs. Output Power at 2.412 GHz, 3.3 V (IEEE 802.11b @ 11 Mbps) 1.0 0.9 0.8 Det Volt. 0C Det Volt. +25C Det Volt. +70C Detector Output (V) 0.5 0.4 0.3 0.2 Detector Output (V) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 12 13 14 15 16 17 18 19 20 21 0.1 0.0 16 17 18 19 20 21 22 23 Output Power (dBm) Output Power (dBm) Figure 10: Power Detector Voltage vs. Output Power at 2.437 GHz, 3.3 V (IEEE 802.11g @ 54 Mbps) 0.8 0.7 0.6 Det Volt. +25C Det Volt. +70C Det Volt. 0C 1 0.9 0.8 Figure 11: Power Detector Voltage vs. Output Power at 2.437 GHz, 3.3 V (IEEE 802.11b @ 11 Mbps) Det Volt. +25C Det Volt. +70C Det Volt. 0C Detector Output (V) 0.5 0.4 0.3 0.2 Detector Output (V) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 12 13 14 15 16 17 18 19 20 21 0.1 0 16 17 18 19 20 21 22 23 Output Power (dBm) Output Power (dBm) Figure 12: Power Detector Voltage vs. Output Power at 2.462 GHz, 3.3 V (IEEE 802.11g @ 54 Mbps) 0.8 0.7 0.6 Det Volt. 0C Figure 13: Power Detector Voltage vs. Output Power at 2.462 GHz, 3.3 V (IEEE 802.11b @ 11 Mbps) 1 0.9 0.8 Det Volt. +25C Det Volt. +70C Det Volt. 0C Det Volt. +25C Det Volt. +70C Detector Voltage (V) 0.5 0.4 0.3 0.2 Detector Output (V) 12 13 14 15 16 17 18 19 20 21 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0.1 0 16 17 18 19 20 21 22 23 Output Power (dBm) Output Power (dBm) Data Sheet - Rev 2.3 04/2005 7 RFS P2023 Figure 14: ACPR Sidelobes vs. Output Power at 2.412 GHz, 3.3 V (IEEE 802.11b @ 11 Mbps) 0 Figure 15: ACPR Sidelobes vs. Output Power at 2.462 GHz, 3.3 V (IEEE 802.11b @ 11 Mbps) 0 1st Sidelobe +25C -10 1st Sidelobe +70C 1st Sidelobe 0C -10 1st Sidelobe +25C 1st Sidelobe +70C 1st Sidelobe 0C Relative Power (dBr) -20 2nd Sidelobe +25C 2nd Sidelobe +70C 2nd Sidelobe 0C Relative Power (dBr) -20 2nd Sidelobe +25C 2nd Sidelobe +70C 2nd Sidelobe 0C -30 -30 -40 -40 -50 -50 -60 16 17 18 19 20 21 22 23 -60 16 17 18 19 20 21 22 23 Output Power (dBm) Output Power Figure 16: +23 dBm Output Power at 2.412 GHz, 3.3 V (IEEE 802.11b @ 11 Mbps) 0 0 -10 +23 dBm @ 2.412 GHz Spectral Mask Limit -10 Figure 17: +23 dBm Output Power at 2.462 GHz, 3.3 V (IEEE 802.11b @ 11 Mbps) +23 dBm @ 2.462 GHz Relative Power (dBr) Relative Power (dBr) -20 -20 Spectral Mask Limit -30 -30 -40 -40 -50 -50 -60 -60 -70 2.38 2.39 2.4 2.41 2.42 2.43 2.44 2.45 -70 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.5 Frequency (GHz) Frequency (GHz) Figure 18: S-Parameter Data S11 and S22, 3.3 V 0 -2 -4 -6 -8 S11 +25C S11 +70C S11 0C S22 +25C S22 +70C S22 0C S11 (dB) -10 -12 -14 -16 -18 -20 2.4 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.5 Frequency (GHz) 8 Data Sheet - Rev 2.3 04/2005 RFS P2023 APPLICATION INFORMATION VCC C1 0.1uF +/-10% C5 10uF 16V +/-20% C4 0.1uF +/-10% **NOTES** RF traces should be 18 mils wide with 20 mils of clearance DC traces should be 8 mils wide with 16 R9 30 +/-5% R10 10 +/-5% L1 10nH +/-5% 15 14 VCC2 8 mils of clearance DNP = Do Not Place 1 2 U1 VCC1 VCC3 NC 13 GND RF IN GND RF OUT 12 11 10 9 RF IN R3 806 +/- 1% 3 4 RFS P2023 GND VPC1 GND DETDC1 RF OUT Vpc2/3 Vbcc DETDC2 DETOUT GND 25 5 6 7 8 R1 75 +/- 1% C11 100pF +/-5% VCC C6 10pF +/-0.5pF R2 10 +/-5% R8 1K +/-5% R4 4.7K +/-5% VD2G VPC C10 0.47uF +/-10% R5 806 +/- 1% C7 10pF +/-0.5pF R6 430 +/- 5% C9 1000pF +/-10% DNP Figure 19: Recommended Application Circuit Data Sheet - Rev 2.3 04/2005 9 RFS P2023 PACKAGE OUTLINE C 4 A Index Area I G 16 1 H B Pin 1 D F E Bottom View Top View MILLIMETERS DIMENSION A B C D E F G H I MIN 2.90 2.90 0.80 0.00 1.65 TYP MAX 3.00 3.10 3.00 3.10 0.90 1.00 0.02 0.05 1.80 1.95 1.50 BSC. 0.225 0.250 0.275 0.50 BSC. 0.35 0.40 0.45 Side View 1. All dimensions are in millimeters, angles in degrees. 2. The terminal #1 identifier and pad numbering convention shall conform to JESD 95-1 SPP-012 . 3. Lead coplanarity: 0.05 max. 4. Dimension applies to metalized pad and is measured between 0.25 and 0.30 MM from pad tip. Figure 20: Package Outline 10 Data Sheet - Rev 2.3 04/2005 RFS P2023 NOTES Data Sheet - Rev 2.3 04/2005 11 RFS P2023 ORDERING INFORMATION ORDER NUMBER PRFS-P2023-EVL PRFS-P2023-005 PRFS-P2023-006 PRFS-P2023-007 PRFS-P2023-008 PRFS-P2023-009 TEMPERATURE RANGE 0 C to +70 C 0 C to +70 C 0 C to +70 C 0 C to +70 C 0 C to +70 C 0 C to +70 C PACKAGE DESCRIPTION 16 Pin 3 x 3 x 0.9 mm LP C C 16 Pin 3 x 3 x 0.9 mm LP C C 16 Pin 3 x 3 x 0.9 mm LP C C 16 Pin 3 x 3 x 0.9 mm LP C C 16 Pin 3 x 3 x 0.9 mm LP C C 16 Pin 3 x 3 x 0.9 mm LP C C COMPONENT PACKAGING 1 piece Evaluation Board 13" Reverse 2,500 piece Tape and Reel 13" Forward 2,500 piece Tape and Reel 7" Reverse 1,000 piece Tape and Reel 7" Forward 1,000 piece Tape and Reel 1-999 piece Tubes or Tray Leadfree and RoHS Compliant RFS2023RS28Q1 RFS2023RS28P0 RFS2023RS28P6 EVA2023RS28 0 C to +70 C 0 C to +70 C 0 C to +70 C 0 C to +70 C 16 Pin 3 x 3 x 0.9 mm LP C C 16 Pin 3 x 3 x 0.9 mm LP C C 16 Pin 3 x 3 x 0.9 mm LP C C 16 Pin 3 x 3 x 0.9 mm LP C C 1,000 piece Tape and Reel 1-999 piece Tubes 1-999 piece Tray 1 piece Evaluation Board ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 12 Data Sheet - Rev 2.3 04/2005 |
Price & Availability of RFSP2023
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |