![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number:ENN2370A PNP/NPN Epitaxial Planar Silicon Transistors 2SA1292/2SC3256 60V/15A High-Speed Switching Applications Applications * Various inductance, lamp drivers for electrical equipment. * Inverters, converters (strobo, flash, fluorescent lamp lighting circuit). * Power amp (high-power care stereo, motor control). * High-speed siwtching (switching regulators, driver). Package Dimensions unit:mm 2022A [2SA1292/2SC3256] 3.5 15.6 14.0 2.6 3.2 4.8 2.0 Features * Low saturation voltage. * Excellent dependence of hFE on current. * Fast switching time. 1.6 2.0 20.0 0.6 1.0 1 0.6 2 3 1.3 1.2 15.0 20.0 ( ) : 2SA1292 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Conditions 5.45 5.45 1 : Base 2 : Collector 3 : Emitter SANYO : TO3PB 1.4 Ratings (-)80 (-)60 (-)5 (-)15 (-)20 Unit V V V A A W Tc=25C 80 150 -55 to +150 C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE fT VCE(sat) VCB=(-)40V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)1A VCE=(-)5V, IC=(-)1A IC=(-)7.5A, IB=(-)0.375A 70* 100 (-)0.4 Conditions Ratings min typ max (-)0.1 (-)0.1 280* MHz V Unit mA mA * : The 2SA1292/2SC3256 are classified by 1A hFE as follows : Rank hFE Q 70 to 140 R 100 to 200 S 140 to 280 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 73102TN (KT)/71598HA (KT)/5137TA, TS No.2370-1/4 2SA1292/2SC3256 Continued from preceding page. Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol V(BR)CBO IC=(-)1mA, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO IE=(-)1mA, IC=0 ton tstg tf See specified Test Circuit See specified Test Circuit See specified Test Circuit Conditions Ratings min (-)80 (-)60 (-)5 0.1 0.5 0.1 typ max Unit V V V s s s Switching Time Test Circuit PW=20s D.C.1% INPUT VR 50 + 100F VBE=--5V 20IB1=--20IB2=IC=6A + 470F VCC=20V IB1 RB IB2 RL 3.3 OUTPUT (For PNP, the polarity is reversed.) --24 --20 IC -- VBE 2SA1292 VCE=--2V 24 IC -- VBE 2SC3256 VCE=2V 20 Collector Current, IC - A --16 Collector Current, IC - A 16 C 25C 0.8 C --12 --8 --4 0 --40C 12 Ta= 1 8 4 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 Base-to-Emitter Voltage, VBE - V ITR03207 0 0 0.2 0.4 0.6 Ta= 1 --40C 1.0 25C 20 20 1.2 1.4 Base-to-Emitter Voltage, VBE - V 1k ITR03208 1k 7 5 hFE -- IC 2SA1292 VCE=--2V hFE -- IC 2SC3256 VCE=2V 7 5 3 2 DC Current Gain, hFE DC Current Gain, hFE 3 2 Ta=120C Ta=120C 25C --40C 25C 100 7 5 3 2 100 7 5 3 2 --40C 10 --0.01 2 3 5 --0.1 2 3 5 --1.0 2 3 Collector Current, IC - A 5 --10 2 3 10 0.01 23 5 0.1 23 5 1.0 23 5 ITR03209 Collector Current, IC - A 23 10 ITR03210 No.2370-2/4 2SA1292/2SC3256 2 fT -- IC Gain-Bandwidth Product, fT - MHz 2SA1292 VCE=--5V 2 fT -- IC 2SC3256 VCE=5V Gain-Bandwidth Product, fT - MHz 100 7 5 100 7 5 3 2 3 2 10 7 10 7 --0.01 --10 5 5 2 3 5 7--0.1 2 3 5 7 --1.0 2 3 57 --10 2 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC - A ITR03211 10 Collector Current, IC - A 5 7 10 2 ITR03212 VCE(sat) -- IC 2SA1292 IC / IB=20 VCE(sat) -- IC 2SC3256 IC / IB=20 5 Collector-to-Emitter Saturation Voltage, VCE (sat) - V Collector-to-Emitter Saturation Voltage, VCE (sat) - V 2 3 5 3 2 3 2 1.0 5 3 2 0.1 5 3 2 --1.0 5 3 2 --0.1 5 3 2 --0.01 --0.01 5 3 2 --0.1 2 3 5 --1.0 2 3 5 Collector Current, IC - A --10 2 3 5 0.01 0.01 23 5 ITR03213 5 Collector Current, IC - A 0.1 23 5 1.0 23 5 10 235 ITR03214 ASO 2SA1292 ASO ICP=20A IC=15A 2SC3256 ICP=-20A Collector Current, IC - A 3 2 10 5 3 2 Collector Current, IC - A --10 IC=-15A 5 3 2 10 DC er op m s 1m 10 DC op s --1.0 5 3 2 10 1.0 5 3 2 0.1 m 1ms s 10 0m 0m s a er s ati on tio n --0.1 5 2 3 2 5 7 --10 3 5 Collector-to-Emitter Voltage, VCE - V 7 --100 5 2 3 5 7 10 2 3 5 ITR03215 Collector-to-Emitter Voltage, VCE - V 7 100 ITR03216 100 PC -- Tc Collector Dissipation, PC - W 80 60 40 20 0 0 20 40 60 80 100 120 140 150 160 ITR03217 Case Temperature, Tc - C No.2370-3/4 2SA1292/2SC3256 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2002. Specifications and information herein are subject to change without notice. PS No.2370-4/4 |
Price & Availability of 2SC3256
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |