View LB1668M_323424.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN4944A
Monolithic Digital IC
LB1668, 1668M, LB1667, 1667M
Two-Phase Unipolar Drive Brushless Motor Drivers
Overview
The LB1668 Series are 2-phase unipolar drive brushless motor drivers that feature a wide usable voltage range and a minimal number of required external components. They also support the formation of motor lock protection and automatic recovery circuits.
Package Dimensions
unit: mm 3098B-DIP10S
[LB1668, 1667]
10 6
* Output protection Zener diodes with variable breakdown voltages -- When the Z1 and Z2 pins are open: VOLM = 57 V -- When the Z1 and Z2 pins are shorted: VOLM = 32 V -- An external Zener diode can be connected between Z1 and VCC. * Can support both 12-V and 24-V power supplies by changing an external resistor. * Hall elements can be connected directly. * 1.5-A output current output transistors built in * Built-in rotation detection function that outputs low when driven and high when stopped (LB1668/M) * FG signal function that sets FG high when IN- is low, and sets FG low when IN- is high (LB1667/M) * Motor lock protection and automatic recovery functions built in * Thermal shutdown function
1
9.4
5
0.51min
0.48 0.95 1.14 1.78
3.2
3.0 3.9max
SANYO: DIP10S
unit: mm 3111-MFP14S
0.625 5.15 0.15 1.8max
[LB1668M, 1667M]
14
8
1
8.0
7
0.35
1.0 1.0
0.1
1.5
4.4
SANYO: MFP14S
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
73099TH (OT)/13097HA (OT) No. 4944-1/8
6.4
0.25
Functions and Features
7.62 6.4
LB1668, LB1668M, LB1667, LB1667M
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter Maximum input current Output voltage Output current Output minus current RD/FG influx current RD/FG voltage Symbol ICC max VOUT IOUT IOM IRD/IFG VRD/VFG Pd max LB1667M, 1668M: Mounted on a printed circuit board (20 x 15 x 1.5 mm3, glass epoxy) LB1667, 1668 Operating temperature Storage temperature Topr Tstg t 20 ms Conditions Ratings 200 Internal 1.5 -50 10 30 0.8 1.1 -30 to +80 -55 to +150 Unit mA V A mA mA V W W C C
Allowable power dissipation
Allowable Operating Ranges at Ta = 25C
Parameter Input current range Common-mode input voltage range Symbol ICC VICM Conditions Ratings 6.0 to 50 0 to VIN -1.5 Unit mA V
Electrical Characteristics at Ta = 25C, ICC = 10 mA
Parameter Symbol VOLM1 VOLM2 Vosat1 Output saturation voltage Vosat2 Vosat3 VIN voltage Amplifier input offset voltage Amplifier input bias current RD output saturation voltage FG output saturation voltage C outflow current C discharge current Comparator input threshold voltage Thermal shutdown current operating temperature Thermal shutdown circuit hysteresis Note: * RD output: LB1668/M, FG output: LB1667/M VIN VOFF IBA VRDsat VFG sat IC1 IC2 VTH1 VTH2 TSD TSD Design target value Design target value IRD = 5 mA* IFG = 5 mA* 2.1 0.31 0.77 0.42 Conditions Z1, Z2 open Z1, Z2 short IO = 0.5 A IO = 1.0 A IO = 1.5 A ICC = 7.0 mA 6.4 -7.0 -250 0.1 0.1 3.0 0.44 0.8VIN 0.45VIN 180 40 0.3 0.3 3.9 0.59 0.83 0.48 Ratings min 54 31 typ 57 33 0.95 1.15 1.4 6.7 0 max 60 35 1.2 1.5 2.0 7.0 +7.0 Unit V V V V V V mV nA V V A A V V C C
Output limit voltage
No. 4944-2/8
LB1668, LB1668M, LB1667, LB1667M Block Diagram and Application Circuit * LB1667, 1667M
* LB1668, 1668M
Truth Table (LB1667, LB1667M)
IN+ H L H L IN- L H L H C L L H H OUT1 H L H H OUT2 L H H H FG H L H H
Pin Assignments
Truth Table (LB1668, LB1668M)
IN+ H L H L IN- L H L H C L L H H OUT1 H L H H OUT2 L H H H RD L L H H Top view
No. 4944-3/8
LB1668, LB1668M, LB1667, LB1667M LB1668M Sample Application Circuits * 12-V power supply type
* 24-V power supply type
* Circuit for use when large output currents are required and heat dissipation is high.
No. 4944-4/8
LB1668, LB1668M, LB1667, LB1667M LB1667M Sample Application Circuits * 12-V power supply type
* 24-V power supply type
* Circuit for use when large output currents are required and heat dissipation is high.
No. 4944-5/8
LB1668, LB1668M, LB1667, LB1667M Design Documentation (See the application circuit diagrams) 1. Power-supply voltage (VIN pin) The resistor R1 (when VCC = 12 V R1 = 330 , and when VCC = 24 R1 = about 1.2 k) is inserted between VIN and the power supply VCC pin. When the ICC current is set in the range 6 to 50 mA, the VIN pin will be regulated to be 6.7 V. Not only does this provide stability with respect to power-supply voltage variations and motor kickback, but it also provides adequate strength to withstand surges. 2. Output transistors (OUT1 and OUT2 pins) A Zener diodes with the following characteristics is inserted between the collector and base of each output transistor to absorb kickback voltages at 57 V (typical) and provide output protection. Sustained output voltage : VO = 65 V minimum (design guarantee) Output current : IO = 1.5 A maximum Output saturation voltage : VO sat = 1.25 V/1.0 A (typical) Safe operating range : IO = 1.0 A, VOLM = 57 V, t = 200 s 3. Output circuit kickback voltage protection (Z1 and Z2 pins) These ICs support output protection that minimizes kickback noise by changing the kickback absorption voltage and absorption method according to the output current and power-supply voltage used. -- When the Z1 and Z2 pins are shorted The output protection voltage will be 32 V (typical) using a VCC = 12 V power supply. -- When the Z1 and Z2 pins are open The output protection voltage will be 57 V (typical) using a VCC = 24 V power supply. -- With a Zener diode inserted between Z1 and VCC or between Z1 and ground This technique handles 120 mm H speed applications which require large output currents and involve large amounts of heat generated in the IC by dissipating the motor coil switching loss in external Zener diodes. 4. Output protection when the motor is lock (C, RD, and FG pins) This circuit detects motor stopping due to, for example, overloading, and cuts the coil current. It also automatically recovers drive and motor turning from the output stopped state when the load returns to an appropriate level. The lock detection time is set with the value of an external capacitor. When C = 0.47 F Lock detection time: about 1 second Lock protection time (output on): about 0.5 second (output off): about 3 seconds The RD pin (LB1668) is an open collector output and outputs a low level during drive and a high level when stopped. The FG pin (LB1667) is an open collector output and is switched between high and low by the drive phase. It goes to the high level when the motor is stopped. 5. Thermal shutdown This circuit turns the output off in response to coil shorting or IC overheating. 6. In applications that use an external transistor to turn the cooling fan power on and off, connect a capacitor of about 0.47 to 10 F between the fan power supply VCC and ground to provide a regenerative route for the fan motor coil current.
No. 4944-6/8
LB1668, LB1668M, LB1667, LB1667M Automatic Recovery Circuit C-Pin Voltage
1. While the blades are turning, the capacitor is charged with a current of about 3 A (typical), and C is discharged by pulses that correspond to the motor speed. 2. When the blades lock, the capacitor is no longer discharged, and the voltage across the capacitor increases. The output is turned off when that voltage reaches 0.8 x VIN. 3. When the output is turned off, the capacitor is discharged at about 0.44 A (typical). When the capacitor voltage falls under VTH2, if the lock state is not yet cleared the capacitor continues discharging until VTH1. (Note that the output is turned on at this time.) These operations, i.e. items 2. and 3., are repeated with a ton:toff ratio of about 1:6 to protect the motor. 4. If the lock is cleared at the point the capacitor voltage reaches VTH2, motor rotation is started by turning the output on.
No. 4944-7/8
LB1668, LB1668M, LB1667, LB1667M
LB1668, 1667
LB1668M, 1667M
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products (including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of July, 1999. Specifications and information herein are subject to change without notice. PS No. 4944-8/8

▲Up To Search▲

Price & Availability of LB1668M

	To Download LB1668M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .