 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2-GHz Mixer TDA 6130-5X4 Preliminary Data Bipolar IC Features q q q q A wide range of supply voltage Few external components High conversion transconductance Wide range of input signal. P-DSO-14-1 Type TDA 6130-5X4 Ordering Code Q67000-A5176 Package P-DSO-14-1 The TDA 6130-5X4 is a symmetrical mixer like the components S 042 P* and TBB 042 G* but for frequencies up to 2 GHz. It can be driven by an external source or by the build-in oscillator. * already cancelled Semiconductor Group 76 08.93 TDA 6130-5X4 Pin Configuration (top view) P-DSO-14 Pin Definitions and Functions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Symbol N.C. MIXO MIXO Function N.C. Mixer output Mixer output Supply voltage N.C. Oscillator input Oscillator input N.C. Mixer input emitter Mixer input base Mixer input emitter Mixer input base N.C. Ground VS N.C. OSCI OSCI N.C. MIXE MIXB MIXE MIXB N.C. GND Semiconductor Group 77 TDA 6130-5X4 Block Diagram Semiconductor Group 78 TDA 6130-5X4 Circuit Description The pins 1, 5, 8, 13 should be connected to pin 14 (ground) to reach optimal HF features. A galvanic connection between pins 6 and 7 and 10 and 12 through coupling windings is recommended. A resistor of at least 220 may be connected between pins 9 and 14 (ground) and between 11 and 14 to increase the currents and thus the conversion transconductance. Pins 9 and 11 may be connected through any impedance. In case of a direct connection between pin 9 and 11, the resistance from this pin to 14 may be at least 100 . Depending on the layout, a capacitor may be required between pins 6 and 7 to prevent oscillations in the UHF band. Semiconductor Group 79 TDA 6130-5X4 Absolute Maximum Ratings TA = 0 to 70 C Parameter Supply voltage Mixer output Oscillator input Mixer input emitter Mixer input base Junction temperature Storage temperature Thermal resistance Operating Range Supply voltage Input frequency range Ambient temperature in operation Symbol min. Limit Values max. 8 8 2.5 3.5 V V V V C C K/W Open collector 0 1 0 0.8 0 - 40 Unit Test Condition V4 V2, 3 V6, 7 V9, 11 V10, 12 Tj Tstg Rth SA V4 - 1.5 125 150 125 VS f15 TA 4 0 7 2000 70 V MHz C Semiconductor Group 80 TDA 6130-5X4 Characteristics TA = 25 C; VS = 6 V 10 % (test circuit 1) Parameter Current consumption Output-current Output-current difference Supply current Symbol min. Limit Values typ. 1.6 0.54 10 0.4 16 16 18 6 7 7.0 0.6 1.5 10 max. 2.1 0.75 60 0.6 19 19 mA mA A mA dB dB V dB k k pF DSB 1.1 0.35 3 0.2 13 13 Unit Test Condition IS = I2 + I3 + I4 I2 = I3 I2 - I3 I4 Power gain VP fe = 100 MHz, fOSC = 110,7 MHz fe = 1 GHz, fOSC = 1,1 GHz Break down voltage V2, 3 NF R C I2, 3 = 10 mA; V6, 7 = 0 Noise figure Mixer output impedance fMO = 100 MHz fMO = 1 GHz Semiconductor Group 81 TDA 6130-5X4 Test Circuit 1 Semiconductor Group 82 TDA 6130-5X4 Application Circuit Semiconductor Group 83 |
Price & Availability of TDA6130-5X4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |