 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| APA2822 Dual Low-Voltage Power Amplifier Features * * * * * Supply Voltage Down to 1.8V Low Crossover Distortion Low Quiescent Current Bridge-tied or Stereo(Single-ended) Configurations Both DIP-8 and SOP-8 packages available General Description The APA2822 is a monolithic integrated circuit in 8lead PDIP package. It is intended for use as dual audio power amplifier in portable cassette players, active speakers, and radios. Applications * * * * * Audio Amplifiers Active Speakers Sound Cards Filters Analog Circuit Pin Description Output (1) Supply Voltage Output (2) Ground 1 2 3 4 8 7 6 5 Input (1) Input (1) Input (2) Input (2) Ordering Information APA 2822 Handling Code Temp. Range Package Code Package Code J : PDIP - 8 Temp. Range C : 0 to +70 C Handling Code TU : Tube K : SOP - 8 ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 1 www.anpec.com.tw APA2822 Absolute Maximum Ratings Symbol VCC IO VI PTOT TSTG , TJ Supply Voltage Peak Output Current Input Voltage Power Dissipation at TAMB = 50C Parameter Rating 15 1 15 1 1.4 -40 to +150 C Unit V A V W at TCASE = 50C Storage and Junction Temperature Range Thermal Data Symbol RTH J-AMB RTH J-CASE Parameter Thermal Resistance Junction-Ambient Thermal Resistance Junction-Pin Max. Max. Rating 100 70 Unit C/ W C/ W Electrical Characteristics Symbol Parameter (VS= 6V , TA = 25C, unless otherwise specified) APA2822 Min. 1.8 Typ. Max. 15 2.7 1.2 6 100 VS = 9V VS = 6V VS = 4.5V VS =3V VS = 2V 300 120 60 20 5 220 1000 380 650 320 110 www.anpec.com.tw Test Conditions Unit STEREO (test circuit of Figure 1) VS VO ID IB PO Supply Voltage Quiescent Output Voltage Quiescent Drain Current Input Bias Current Output Power (f = 1kHz, d = 10%) RL =32 VS =3V V V mA nA mW RL =16 RL =8 RL =4 VS = 6V VS = 9V VS = 6V VS = 6V VS = 4.5V VS = 3V Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 2 APA2822 Electrical Characteristics Cont. Symbol d Parameter Distortion (f = 1kHz) (VS= 6V , TA = 25C, unless otherwise specified) APA2822 Typ. Max. 0.2 0.2 0.2 39 1 100 2.5 30 50 1.8 15 6 9 50 100 V mA mV nA mW Test Conditions RL =32 RL =16 RL = 8 PO = 40mW PO = 75mW PO = 150mW Min. Unit % STEREO (test circuit of Figure 1) GV GV RI eN SVR Cs VS ID VOS IB PO Closed Loop Voltage Gain f = 1kHz Channel Balance Input Resistance Total Input Noise Supply Voltage Rejection Channel Separation Supply Voltage Quiescent Drain Current Output Offset Voltage (between the outputs) Input Bias Current Output Power (f = 1kHz, d = 10%) RL =8 RL =8 VS = 9V VS = 6V VS = 4.5V VS =3V VS = 2V VS = 9V VS = 6V VS = 3V VS = 6V VS = 4.5V VS = 3V VS = 4.5V VS = 3V VS = 2V 1000 400 200 65 8 2000 800 120 1350 700 220 1000 350 80 0.2 39 100 3 30 120 f = 1kHz RS = 10k B = 22Hz to 22kHz f = 100Hz, C1 = C2 = 100F f = 1kHz dB dB k V dB BRIDGE (test circuit of Figure 2) RL =32 RL =16 RL =8 RL =4 d GV RJ eN SVR B Distortion PO = 0.5W, RL =8 , f = 1kHz f = 1kHz RS =10k , B = 22Hz to 22kHz f = 100Hz RL =8 , PO = 1W % dB k Closed Loop Voltage Gain f = 1kHz Input Resistance Total Input Noise Supply Voltage Rejection Power Bandwidth (-3dB) V dB kHz Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 3 www.anpec.com.tw APA2822 Test Information Figure 1 : Test Circuit (Stereo) +VS 2 C4 470F C3 10F IN (L) R1 10k C1 100F + 7 8 1 C6 0.1F R3 4.7 - RL IN (R) R2 10k C2 100F + 6 5 C5 470F 3 C7 0.1F R4 4.7 - RL 4 Figure2 : Test Circuit (Bridge) +VS 2 C3 10F IN R1 10k + 7 1 R2 4.7 C1 10F C4 0.1F RL - 8 6 - + 3 5 R3 4.7 C5 0.1F 4 C2 10F Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 4 www.anpec.com.tw APA2822 Test Information Figure 3 : Typical Application in Portable Players +3V C3 10F 2 C5 100F 1 C6 0.1F R3 4.7 C5 100F IN (L) R1 10k C1 100F - IN (R) R2 10k C2 100F + 6 5 - 8 + 7 3 C7 0.1F R4 4.7 32/16 Headphone 4 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 5 www.anpec.com.tw APA2822 Packaging Information PDIP-8 pin ( Reference JEDEC Registration MS-001) D E1 1 E A L e2 e1 e3 A1 A2 1 E3 Dim Min. A A1 A2 D e1 e2 e3 E E1 E3 L 1 0.38 2.92 9.02 Millimeters Max. 5.33 3.68 10.16 2.54BSC 0.36 1.14 7.62 BSC 6.10 2.92 15 7.11 10.92 3.81 0.240 0.115 0.56 1.78 0.014 0.045 Min. 0.015 0.115 0.355 Inches Max. 0.210 0.145 0.400 0.100BSC 0.022 0.070 0.300 BSC 0.280 0.430 0.150 15 Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 6 www.anpec.com.tw APA2822 Packaging Information SOP-8 pin ( Reference JEDEC Registration MS-012) 0.015X45 E H e e1 D e2 A1 A 1 L 0.004max. Dim A A1 D E H L e1 e2 1 Min. 1.35 0.10 4.80 3.80 5.80 0.40 0.33 Millimeters Max. 1.75 0.25 5.00 4.00 6.20 1.27 0.51 1.27BSC 0 8 0 Min. 0.053 0.004 0.189 0.150 0.228 0.016 0.013 Inches Max. 0.069 0.010 0.197 0.157 0.244 0.050 0.020 0.50BSC 8 Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 7 www.anpec.com.tw APA2822 Physical Specifications Terminal Material Lead Solderability Packaging Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. 2500 devices per reel Reflow Condition (IR/Convection or VPR Reflow) Reference JEDEC Standard J-STD-020A APRIL 1999 temperature Peak temperature 183C Pre-heat temperature Time Classification Reflow Profiles Convection or IR/ Convection Average ramp-up rate(183C to Peak) 3C/second max. 120 seconds max Preheat temperature 125 25C) 60 - 150 seconds Temperature maintained above 183C Time within 5C of actual peak temperature 10 -20 seconds Peak temperature range 220 +5/-0C or 235 +5/-0C Ramp-down rate 6 C /second max. 6 minutes max. Time 25C to peak temperature VPR 10 C /second max. 60 seconds 215-219C or 235 +5/-0C 10 C /second max. Package Reflow Conditions pkg. thickness 2.5mm and all bgas Convection 220 +5/-0 C VPR 215-219 C IR/Convection 220 +5/-0 C pkg. thickness < 2.5mm and pkg. volume 350 mm pkg. thickness < 2.5mm and pkg. volume < 350mm Convection 235 +5/-0 C VPR 235 +5/-0 C IR/Convection 235 +5/-0 C www.anpec.com.tw Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 8 APA2822 Reliability test program Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B, A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245C , 5 SEC 1000 Hrs Bias @ 125 C 168 Hrs, 100 % RH , 121C -65C ~ 150C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms , Itr > 100mA Carrier Tape & Reel Dimensions F B P1 E J H C A G D I K T2 M W L V T1 A E B C J K F P1 D Application 12 + 0.3 8.0 0.1 1.75 0.1 5.5 0.1 1.55 0.1 1.5 0.25 4.0 0.1 2.0 0.1 6.4 0.1 SOP 8N 12 - 0.1 G I H L V W M T1 T2 Application 13+0.5 2.20.1 12.5 0.5 2.0 0.2 SOP 8N 5.2 0.1 2.1 0.1 0.30.013 3301 1001 13 -0.1 Cover Tape Dimensions Carrier Width Cover Tape Width Copyright ANPEC Electronics Corp. Rev. A.2 - Jan., 2001 9 (mm) 12 9.3 (mm) www.anpec.com.tw |
Price & Availability of APA2822
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |