Part Number Hot Search : 
SMW250 S9S08D 24LC16 IR6038 T3487109 LPR430AL 6MBP15R D780022
Product Description
Full Text Search
 

To Download ISL6597 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 (R)
ISL6597
Data Sheet September 2004 FN9165
PRELIMINARY
ISL6597 Integrated Power Stage
The ISL6597 is a high performance power stage for the highest power density server and workstation buck regulation solutions. The ISL6597 combined with the ISL6592 Digital Multiphase Controller offers a complete high current, small form factor solution with superior accuracy, transient response, and protection features. The ISL6597 integrates a low r(DSON) high-side P-Channel MOSFET together with both high-side and low-side MOSFET drivers. The integration of the high-side power FET with high- and low-side drivers minimizes switching losses while providing industry leading power density. A maximum peak output current of 30A per phase is supported in an area less than 16mm2, smaller than most discrete power MOSFETs. The ISL6597 low-side driver supply (VDRIVE) may be biased separately from the VCC supply from 5V to 12V to optimize the system efficiency. The ISL6597 has a patent pending lossless current sensor which accurately senses the current in the high-side FET independent of VID, inductor value, supply, temperature, and switching frequencies. This integrated current sense method provides the accuracy of precision resistor based sensing with no efficiency loss. The ISL6597 has an integrated high-side FET short detector which reacts rapidly on startup to protect the processor before the controller is powered up. The output high-side short pins from each phase can drive a single external crowbar circuitry for rapid protection from a high-side short on any phase of a multiphase solution. The high-side short pin also acts as an input, detecting alert signals from every ISL6597 power stage in the system and protecting each power stage internally as well. The ISL6597 also has an integrated junction temperature sensor which provides an on-die measurement of the highside FET temperature. When used with the ISL6592 controller, this feature provides very accurate, programmable over-temperature protection. The ISL6597 uses CSP packaging to provide the lowest thermal resistance and smallest footprint. A relaxed 0.65mm ball pitch allows for easy assembly.
Features
* Highest power density solution available when combined with the PowerCodeTM ISL6592 Digital Multiphase Controller * Integrated P-channel high-side FET * Integrated high and low side drivers * 30A per power stage capability * Discrete low-side FET for best efficiency * Process and temperature independent lossless integrated current sense for accurate loadlines and overcurrent protection * Integrated high-side short detection protects processor from over-voltage due to any shorted high-side FET in the system * High-side short detect can be used with optional external SCR crowbar circuit to further protect the processor from shorted high-side FETs * On-die temperature sense works in conjunction with the ISL6592 Digital Multiphase Controller to provide accurate programmable thermal shutdown protection * Low-side driver supply (VDRIVE) may be separately biased from 5V to 12V to optimize efficiency * 35-ball small form factor CSP package (3.185mm x 4.835mm) provides ultra low thermal resistance
Applications
* Core power regulation for Intel(R) and AMD(R) processors * Small form factor point-of-load applications
Ordering Information
PART NUMBER ISL6597 TEMP (C) PACKAGE 35 BALL CSP PKG. DWG. #
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2004. All Rights Reserved All other trademarks mentioned are the property of their respective owners.
ISL6597 Pinout
ISL6597 (35 BALL CSP) BOTTOM VIEW
A
VSW
GND
VCC
VCC
VCC
B
VSW
VSW
VSW
VSW
VSW
C
VSW
VCC
VCC
VCC
VCC
D
VSW
VSW
VSW
VSW
VSW
E
HSS
VCC
VCC
VCC
VCC
F
VDRIVE
VCC
GND
VCC
TEMP
G
NGATE
NDRIVE
GND
PWM
ISENSE
5
4
3
2
1
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 2


▲Up To Search▲   

 
Price & Availability of ISL6597

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X