|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
H T-13/4 (5 mm) Low Profile LED Lamps Technical Data HLMP-335X Series HLMP-336X Series HLMP-345X Series HLMP-346X Series HLMP-355X Series HLMP-356X Series Features * High Intensity * Low Profile: 5.8 mm (0.23 in.) Nominal * T-13/4 Diameter Package * Diffused and Non-diffused Types * General Purpose Leads * IC Compatible/Low Current Requirements * Reliable and Rugged The HLMP-355X/-356X Series are Gallium Phosphide Green Light Emitting Diodes. The Low Profile T-13/4 package provides space savings and is excellent for backlighting applications. Description The HLMP-335X/-336X Series are Gallium Arsenide Phosphide on Gallium Phosphide High Efficiency Red Light Emitting Diodes. The HLMP-345X/-346X Series are Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diodes. Package Dimensions 5.34 (0.210) 4.83 (0.190) 5964-9295E 1-101 Selection Guide Part Number HLMP3350 3351 3365 3366 3450 3451 3465 3466 3553 3554 3567 3568 Application Indicator - General Purpose Indicator - High Brightness General Purpose Point Source Indicator - High Brightness Indicator - General Purpose Indicator - High Brightness General Purpose Point Source Indicator - High Brightness Indicator - General Purpose Indicator - High Brightness General Purpose Point Source Indicator - High Brightness Minimum Intensity @ 10 mA (mcd) 2.1 5.4 8.6 13.8 2.2 5.7 5.7 9.2 1.6 6.7 4.2 10.6 Lens Tinted Diffused Wide Angle HER Tinted Non-diffused Narrow Angle HER Tinted Diffused Wide Angle Yellow Tinted Non-diffused Narrow Angle Yellow Tinted Diffused Wide Angle Green Tinted Non-diffused Narrow Angle Green 1-102 High Efficiency Red HLMP-335X/-336X Series Electrical Specifications at TA = 25C Symbol IV Description Axial Luminous Intensity Device HLMP3350 3351 3365 3366 3350 3351 3365 3366 Min. 2.1 5.4 8.6 13.8 Typ. 3.5 7.0 10.0 18.0 50 50 45 45 635 626 40 90 11 260 1.9 5.0 145 2.4 Max. Units mcd Test Conditions IF = 10 mA (Figure 8) 21/2 Including Angle Between Half Luminous Intensity Points Deg. Note 1 (Figure 11) PEAK d 1/2 s C RJ-PIN VF VR V Peak Wavelength Dominant Wavelength Spectral Line Halfwidth Speed of Response Capacitance Thermal Resistance Forward Voltage Reverse Breakdown Voltage Luminous Efficacy nm nm nm ns pF C/W V V lm/W Measurement at Peak (Figure 1) Note 2 VF = 0; f = 1 MHz Junction to Cathode Lead IF = 10 mA (Figure 7) IR = 100 A Note 3 Notes: 1. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. Dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant Intensity, Ie, in watts/steradian may be found from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. Figure 7. Forward Current vs. Forward Voltage. Figure 8. Relative Luminous Intensity vs. Forward Current. Figure 9. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 1-103 Figure 10. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 11. Relative Luminous Intensity vs. Angular Displacement. Yellow HLMP-345X/-346X Series Electrical Specifications at TA = 25C Symbol IV Description Axial Luminous Intensity Device HLMP3450 3451 3465 3466 3450 3451 3465 3466 Min. 2.2 5.7 5.7 9.2 Typ. 4.0 10.0 12.0 18.0 50 50 45 45 583 585 36 90 15 260 2.0 5.0 500 2.4 Max. Units mcd Test Conditions IF = 10 mA (Figure 13) 21/2 Including Angle Between Half Luminous Intensity Points Deg. Note 1 (Figure 16) PEAK d 1/2 s C RJ-PIN VF VR V Peak Wavelength Dominant Wavelength Spectral Line Halfwidth Speed of Response Capacitance Thermal Resistance Forward Voltage Reverse Breakdown Voltage Luminous Efficacy nm nm nm ns pF C/W V V lm/W Measurement at Peak (Figure 1) Note 2 VF = 0; f = 1 MHz Junction to Cathode Lead IF = 10 mA (Figure 12) IR = 100 A Note 3 Notes: 1. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. Dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant Intensity, Ie, in watts/steradian may be found from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. 1-104 60 I F - FORWARD CURRENT - mA 50 40 30 20 10 0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 V F - FORWARD VOLTAGE - V Figure 12. Forward Current vs. Forward Voltage. Figure 13. Relative Luminous Intensity vs. Forward Current. Figure 14. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Figure 15. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 16. Relative Luminous Intensity vs. Angular Displacement. 1-105 Green HLMP-355X/-356X Series Electrical Specifications at TA = 25C Symbol IV Description Axial Luminous Intensity Device HLMP3553 3554 3567 3568 3553 3554 3567 3568 Min. 1.6 6.7 4.2 10.6 Typ. 3.2 10.0 7.0 15.0 50 50 40 40 565 569 28 500 18 260 2.1 5.0 595 2.7 Max. Units mcd Test Conditions IF = 10 mA (Figure 18) 21/2 Including Angle Between Half Luminous Intensity Points Deg. Note 1 (Figure 21) PEAK d 1/2 s C RJ-PIN VF VR V Peak Wavelength Dominant Wavelength Spectral Line Halfwidth Speed of Response Capacitance Thermal Resistance Forward Voltage Reverse Breakdown Voltage Luminous Efficacy nm nm nm ns pF C/W V V lm/W Measurement at Peak (Figure 1) Note 2 VF = 0; f = 1 MHz Junction to Cathode Lead IF = 10 mA (Figure 17) IR = 100 A Note 3 Notes: 1. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. Dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant Intensity, Ie, in watts/steradian may be found from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. Figure 17. Forward Current vs. Forward Voltage. Figure 18. Relative Luminous Intensity vs. Forward Current. Figure 19. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 1-106 Figure 20. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 21. Relative Luminous Intensity vs. Angular Displacement. 1-107 |
Price & Availability of HLMP-3567 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |