 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MITSUMI HBS-Compatible Driver and Receiver MM1007 HBS-Compatible Driver and Receiver Monolithic IC MM1007 Outline This IC conforms to the HBS (Home Bus) specification (Electronic Industries Association of Japan), and has functions for the reception and transmission of data. AMI is adopted for the waveforms of signals handled by the transmission and reception units, designed for connection to twisted-pair lines. Telephone equipment, security devices, audio or video equipment, air-conditioning equipment, and a wide range of other devices can be connected to a bus line to enable mutual communications. Features 1. Compact design 2. High reliability 3. Replaces pulse transformers 4. Low cost 5. Easy circuit design 6. Few external components Applications 1. Telephony equipment 2. Security equipment 3. Audio and video devices 4. Air-conditioning equipment 5. Wide range of other equipment and devices Package DIP-16A (MM1007XD) SOP-16A (MM1007XF) Block Diagram MITSUMI HBS-Compatible Driver and Receiver MM1007 Absolute Maximun Ratings Item (Ta=25C) Symbol TSTG TOPR VB max. VCC max. Pd VCCOP VBOP VCCOP2 Ratings -40~+125 -20~+175 -0.3~+41 -0.3~+7 450 4.75~5.25 8~40 4.5~5.5 Units C C Operating temperature Storage temperature Bias voltage Power voltage Allowable loss Recommended power supply voltage range Recommended bias voltage range Operating power supply voltage range V V mW V V V Electrical Characteristics Item Power supply current Power supply current Bias current pin 3 Bias current pin 3 Transmission output voltage Transmission waveform symmetry Reception sensitivity Noise resistance Input impedance Transmission delay time 1 Transmission delay time 2 Transmission delay time 3 Transmission delay time 4 Reception output H voltage Reception output L voltage Transmission waveform LOSS1 Transmission waveform LOSS2 H level input voltage L level input voltage H level input current L level input current (Except where noted therwise, Ta=25C, VCC=5V, VB=30V, Ftransmit=10kHz (DUTY=50%)) Symbol ICCO ICCON IBO IBON VTO VTR VRS VRN RIN Td1 Td2 Td3 Td4 VROH VROL VTLS1 VTLS2 VLIH VLIL ILIH ILIL VIN=2.4V VIN=0.4V H level input voltage L level input voltage 4.5 4.5 2.4 0.8 10 -300 Level at which no errors are output Both pins 14 and 15 cf. transmit/receive waveform diagrams cf. transmit/receive waveform diagrams cf. transmit/receive waveform diagrams cf. transmit/receive waveform diagrams 4.5 Measurement conditions No signal (7-8PIN=H) In transmission FL=10k, RL=36 No signal (7-8PIN=H) In transmission FL=10k, RL=36 Both pins 10 and 11 VTO1/VTO2 3.8 0.75 0.65 0.55 25 36 0.2 0.4 0.7 1.0 VCC 0.5 46 Min. Typ. Max. Units 7 65 220 1.5 4.2 1.0 0.75 10 75 350 2.2 4.6 1.25 0.85 VP-P VP-P k S S S S V V V V V V A A mA mA A mA VP-P When a negative voltage is applied to pins 10 and 11, there should be no abnormal operation of internal circuits between 0 and 6V. However, if a negative voltage exceeding -6V is applied, thyristor operation may result, so it is recommended that an external clamping diode be added. MITSUMI HBS-Compatible Driver and Receiver MM1007 Application Circuits TR1, TR2 C1, C2 R1, R2 C3, C4 DZ1, DZ2, DZ3, DZ4 2SC2001 0.022F 33k 10f VZ=5.6V DATA IN A DATA IN B Transmission DATA OUT A Transmission DATA OUT B Reception DATA OUT Circuit Diagram MITSUMI HBS-Compatible Driver and Receiver MM1007 MM1007 When used with a single +5V power supply APPLICATION 1 APPLICATION 2 |
Price & Availability of MM1007
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |