 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TESTING HIGHLY SENSITIVE 1500 V FCC SURGE WITHSTANDING MINIATURE RELAY 9.9 .390 9.8 .386 DS-RELAYS FEATURES * High sensitivity: 200 mW pick-up power 100 mW pick-up power types available * Latching types available * High switching capacity: 60 W, 125 V A * High breakdown voltage: 1,500 V FCC surge between open contacts 1,000 V AC between open contacts * DIP-1C type can be used with 14 pin IC socket 2C type can be used with 16 pin IC socket, 4C type can be used with 2 sets of 14 pin IC sockets * Gold-cap silver palladium types available for 2 Form C type * Bifurcated contacts are standard 35.24 1.387 20 .787 9.9 .390 9.8 .386 DS4E 15 .590 9.9 .390 9.8 .386 DS2E DS1E mm inch SPECIFICATIONS Contact Arrangement 1 Form C, 2 Form C, 4 Form C Initial contact resistance, max. 50 m (By voltage drop 6 V DC 1 A) Contact material Gold-clad sliver Max. switching power 60 W, 125 VA Max. switching voltage 220 V DC, 250 V AC Rating (resistive) Max. switching current 2 A DC, AC Max. carrying current 3 A DC, AC Mechanical 108 Expected (at 600 cpm) (1 Form C 2 coil latching type: 107) life (min. operations) Electrical 5x105 2 A 30 VDC resistive * Gold capped silver-palladium contact also available for 2 Form C 107 operations at 0.1 A 50 V DC resistive Characteristics (at 20C 68F) Max. operating speed Initial insuration resistance*1 Type of relay Initial Between open contacts breakdown volt- Between contacts sets age*2 Between contacts and coil FCC surge voltage between contacts and coil Operate time*3 (at nominal voltage) Release time (without diode)*3 (at nominal voltage) Set time*3 (at nominal voltage) Reset time*3 (at nominal voltage) Temperature rise (at nominal voltage, Contact current: 2A) Shock resistance Functional*4 Destructive*5 Functional*6 Vibration resistance Destructive 20 cpm at rated load 50 cps at low level load Min. 100 M (at 500 V DC) (DS1-S type) (Other types) 500 Vrms 1,000 Vrms -- 1,000 Vrms 1,000 Vrms 1,500 Vrms 1,500 V (Expect DS1-S type) Approx. 3 ms Approx. 2 ms Approx. 3 ms Approx. 3 ms Max. 65C 1C, 2C:Min. 490 m/s2 {50 G} 4C:Min. 294 m/s2 {30 G} Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm -40C to +70C -40F to +158F 5 to 85% R.H. Approx. 3.2g .11oz Approx. 4g .14oz Approx. 7g .25oz Coil (polarized) (at 20C 68F) Single side stable Minimum operating power Nominal operating power Approx. 200 mW Approx. 400 mW M 1 coil Minimum set and reset power Approx. 90 mW type latching Nominal set and reset power Approx. 180 mW Minimum set and reset power Approx. 180 mW 2 coil latching Nominal set and reset power Approx. 360 mW Approx. 100 mW (128 mW)* Single Minimum operating power side Nominal operating power Approx. 200 mW stable S 1 coil Minimum set and reset power type latching Nominal set and reset power Minimum set and reset power 2 coil latching Nominal set and reset power * For 1 Form C high sensitive types. FCC (Federal Communication Commission) requests following standard as Breakdown Voltage specification. Approx. 45 mW (58 mW)* Approx. 90 mW Approx. 90 mW (115 mW)* Approx. 180 mW Conditions for operation, transport and storage*7 (Not freezing and condensing at low temperature) Unit weight Remarks Ambient temp. Humidity 1 Form C 2 Form C 4 Form C 1500V 750V 10 s 160 s * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10 mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10s *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10s *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61) 186 DS TYPICAL APPLICATIONS * Telecommunication equipment * Office equipment * Computer peripherals * Security equipment * Measuring instrumentation ORDERING INFORMATION Ex DS Contact arrangement 1: 1 Form C 2: 2 Form C 4: 4 Form C 2 E M L2 DC 48 V R * Classification of type E: Amber sealed type Sensitivity M: 400 mW nominal operating power S: 200 mW nominal operating power Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching Coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V *Reverse polarity types available (add suffix-R). Standard packing: Carton: 50 pcs.; Case: 500 pcs. TYPES Single side stable Nominal Voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48 1 Form C DS1E-M-DC1.5V DS1E-M-DC3V DS1E-M-DC5V DS1E-M-DC6V DS1E-M-DC9V DS1E-M-DC12V DS1E-M-DC24V DS1E-M-DC48V DS1E-S-DC1.5V DS1E-S-DC3V DS1E-S-DC5V DS1E-S-DC6V DS1E-S-DC9V DS1E-S-DC12V DS1E-S-DC24V DS1E-S-DC48V Part No. 2 Form C DS2E-M-DC1.5V DS2E-M-DC3V DS2E-M-DC5V DS2E-M-DC6V DS2E-M-DC9V DS2E-M-DC12V DS2E-M-DC24V DS2E-M-DC48V DS2E-S-DC1.5V DS2E-S-DC3V DS2E-S-DC5V DS2E-S-DC6V DS2E-S-DC9V DS2E-S-DC12V DS2E-S-DC24V DS2E-S-DC48V Part No. 2 Form C DS2E-ML-DC1.5V DS2E-ML-DC3V DS2E-ML-DC5V DS2E-ML-DC6V DS2E-ML-DC9V DS2E-ML-DC12V DS2E-ML-DC24V DS2E-ML-DC48V DS2E-SL-DC1.5V DS2E-SL-DC3V DS2E-SL-DC5V DS2E-SL-DC6V DS2E-SL-DC9V DS2E-SL-DC12V DS2E-SL-DC24V DS2E-SL-DC48V Part No. 2 Form C DS2E-ML2-DC1.5V DS2E-ML2-DC3V DS2E-ML2-DC5V DS2E-ML2-DC6V DS2E-ML2-DC9V DS2E-ML2-DC12V DS2E-ML2-DC24V DS2E-ML2-DC48V DS2E-SL2-DC1.5V DS2E-SL2-DC3V DS2E-SL2-DC5V DS2E-SL2-DC6V DS2E-SL2-DC9V DS2E-SL2-DC12V DS2E-SL2-DC24V DS2E-SL2-DC48V 4 Form C DS4E-M-DC1.5V DS4E-M-DC3V DS4E-M-DC5V DS4E-M-DC6V DS4E-M-DC9V DS4E-M-DC12V DS4E-M-DC24V DS4E-M-DC48V DS4E-S-DC1.5V DS4E-S-DC3V DS4E-S-DC5V DS4E-S-DC6V DS4E-S-DC9V DS4E-S-DC12V DS4E-S-DC24V DS4E-S-DC48V M (400 mW) type S (200 mW) type 1 coil latching Nominal Voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48 1 Form C DS1E-ML-DC1.5V DS1E-ML-DC3V DS1E-ML-DC5V DS1E-ML-DC6V DS1E-ML-DC9V DS1E-ML-DC12V DS1E-ML-DC24V DS1E-ML-DC48V DS1E-SL-DC1.5V DS1E-SL-DC3V DS1E-SL-DC5V DS1E-SL-DC6V DS1E-SL-DC9V DS1E-SL-DC12V DS1E-SL-DC24V DS1E-SL-DC48V 4 Form C DS4E-ML-DC1.5V DS4E-ML-DC3V DS4E-ML-DC5V DS4E-ML-DC6V DS4E-ML-DC9V DS4E-ML-DC12V DS4E-ML-DC24V DS4E-ML-DC48V DS4E-SL-DC1.5V DS4E-SL-DC3V DS4E-SL-DC5V DS4E-SL-DC6V DS4E-SL-DC9V DS4E-SL-DC12V DS4E-SL-DC24V DS4E-SL-DC48V M (180 mW) type S (90 mW) type 2 coil latching Nominal Voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48 1 Form C DS1E-ML2-DC1.5V DS1E-ML2-DC3V DS1E-ML2-DC5V DS1E-ML2-DC6V DS1E-ML2-DC9V DS1E-ML2-DC12V DS1E-ML2-DC24V DS1E-ML2-DC48V DS1E-SL2-DC1.5V DS1E-SL2-DC3V DS1E-SL2-DC5V DS1E-SL2-DC6V DS1E-SL2-DC9V DS1E-SL2-DC12V DS1E-SL2-DC24V DS1E-SL2-DC48V 4 Form C DS4E-ML2-DC1.5V DS4E-ML2-DC3V DS4E-ML2-DC5V DS4E-ML2-DC6V DS4E-ML2-DC9V DS4E-ML2-DC12V DS4E-ML2-DC24V DS4E-ML2-DC48V DS4E-SL2-DC1.5V DS4E-SL2-DC3V DS4E-SL2-DC5V DS4E-SL2-DC6V DS4E-SL2-DC9V DS4E-SL2-DC12V DS4E-SL2-DC24V DS4E-SL2-DC48V M (360 mW) type S (180 mW) type Notes: 1. Reverse polarity types available (add suffix-R). 2. Standard packing: carton: 50 pcs.; case: 500 pcs. 187 DS COIL DATA (at 20C 68F) Single side stable Nominal voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48 Pick-up voltage, V DC (max.) 1 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.2 2.4 4.0 4.8 7.2 9.6 19.2 38.6 2, 4 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 Drop-out voltage, V DC (min.) 0.15 0.3 0.5 0.6 0.9 1.2 2.4 4.8 0.15 0.3 0.5 0.6 0.9 1.2 2.4 4.8 Coil resistance, (10%) 5.63 22.5 62.5 90 203 360 1440 5760 11.3 45 125 180 405 720 2880 11520 Maximum allowable, V DC (at 50C 122F) 1 Form C 2, 4 Form C 1.8 2.25 3.6 4.5 6 7.5 7.2 9 10.8 13.5 14.4 18 28.8 36 57.6 72 2.4 3 4.8 6 8.0 10 9.6 12 14.4 18 19.2 24 28.4 48 76.8 96 Maximum allowable, V DC (at 50C 122F) 1 Form C 2, 4 Form C 1.8 2.25 3.6 4.5 6 7.5 7.2 9 10.8 13.5 14.4 18 28.8 36 57.6 72 2.4 3 4.8 6 8.0 10 9.6 12 14.4 18 19.2 24 38.4 48 76.8 96 Maximum allowable, V DC (at 50C 122F) 1 Form C 2,4 Form C 1.8 2.25 3.6 4.5 6 7.5 7.2 9 10.8 13.5 14.4 18 28.8 36 57.6 72 2.4 3 4.8 6 8.0 10 9.6 12 14.4 18 19.2 24 38.4 48 76.8 96 M type S type 1 coil latching Nominal voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48 Reset Set, V DC (max.) 1 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.2 2.4 4.0 4.8 7.2 9.6 19.2 38.4 2, 4 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 Coil resistance, (10%) 12.5 50 139 200 450 800 3200 12800 25 100 278 400 900 1600 6400 25600 M type S type 2 coil latching Nominal voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48 Reset Set, V DC (max.) 1 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.2 2.4 4.0 4.8 7.2 9.6 19.2 38.4 2,4 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 Coil resistance, (10%) Coil l 6.25 25 69.4 100 225 400 1600 6400 12.5 50 139 200 450 800 3200 12800 Coil ll M type S type 188 DS DIMENSIONS 1 Form C Single side stable, 1 coil latching, 2 coil latching 15 .590 9.3 9.9 .366 .340 3.4 .134 5.08 .200 7.62 .300 0.6 .024 5.08 .200 7.62 .300 0.6 .024 15 .590 9.9 .390 0.6 .024 2.54 .100 7.62 .300 mm inch PC board pattern (Copper-side view) Single side stable, 1 coil latching 2 coil latching 5-0.9 dia 5-.035 dia 2.54 .100 6-0.9 dia 6-.035 dia 2.54 .100 7.62 .300 2.54 .100 5.6 .221 7.62 .300 Tolerance: 0.1 .004 General tolerance: 0.3 .012 Schematic (Bottom view) Single side stable Deenergized condition 1 + 6 - 1 coil latching 1 - 6 + 2 coil latching 1 + 3 - 6 + SET RST N.O. N.C. COM 12 10 7 * A polarity bar showing the relay direction can replace the schematic. SET RST 12 10 COM 7 SET RST 12 10 COM 7 Diagram shows the "reset" position when terminals 1 and 6 are energized. Energize with reverse polarity to transfer contacts. Diagram shows the "reset" position when terminals 3 and 6 are energized. Energize terminals 1 and 3 to transfer contacts. 2 Form C Single side stable, 1 coil latching, 2 coil latching 20 .787 9.3 9.9 .366 .340 3.4 .134 5.08 5.08 .200 .200 20 .787 9.9 .390 0.6 .024 PC board pattern (Copper-side view) Single side stable, 1 coil latching 2 coil latching 8-0.9 dia 8-.035 dia 2.54 .100 7.62 .300 2.54 .100 10-0.9 dia 10-.035 dia 2.54 .100 7.62 .300 2.54 .100 0.6 .024 7.62 .300 0.6 .024 5.08 5.08 5.08 .200 .200 .200 2.54 .100 5.6 .221 7.62 .300 matching 16 pin IC socket Tolerance: 0.1 .004 General tolerance: 0.3 .012 Schematic (Bottom view) Single side stable Deenergized condition 9 11 13 N.O. N.C. COM 16 - 1 coil latching 9 11 13 SET RST COM 16 + 2 coil latching 9 11 13 15 16 SET RST COM - - Reset SET RST COM 8 6 4 - 1 SET RST COM + + 8 6 4 21 N.O. N.C. COM + 8 6 4 1 * A polarity bar showing the relay direction can replace the schematic. Diagram shows the "reset" position when terminals 1 and 16 are energized. Energize with reverse polarity to transfer contacts. Diagram shows the "reset" position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts. Set 189 DS 4 Form C Single side stable, 1 coil latching, 2 coil latching 35.24 1.387 9.3 9.9 .366 .340 3.4 .134 5.08 5.08 .200 .200 7.62 .300 5.08 5.08 5.08 .200 .200 .200 0.6 .024 5.08 5.08 5.08 5.08 5.08 5.08 .200 .200 .200 2.54.200 .200 .200 .100 0.6 .024 5.6 .221 7.62 .300 35.24 1.387 9.9 .390 0.6 .024 mm inch General tolerance: 0.3 .012 PC board pattern (Copper-side view) Single side stable, 1 coil latching 14-0.9 dia 14-.035 dia 2.54 .100 7.62 .300 2.54 .100 2 coil latching 16-0.9 dia 16-.035 dia 2.54 .100 7.62 .300 2.54 .100 2.54 x 2 2.54 x 2 2.54 x 3 2.54 x 2 2.54 x 2 2.54 x 2 .100 x 2 .100 x 2 .100 x 3 .100 x 2 .100 x 2 .100 x 2 2.54 x 2 2.54 x 2 2.54 x 2 2.54 2.54 x 2 2.54 x 2 2.54 x 2 .100 x 2 .100 x 2 .100 x 2 .100 .100 x 2 .100 x 2 .100 x 2 Tolerance: 0.1 .004 Schematic (Bottom view) Single side stable Deenergized condition 9 11 13 16 14 12 10 N.O. N.C. COM - COM N.C. N.O. 1 coil latching 9 11 13 16 14 12 10 SET RST COM - COM RST SET 2 coil latching 9 11 13 1516 14 12 10 SET RST COM - - COM RST SET Reset Set N.O. N.C. COM + COM N.C. N.O. 864 135 7 * A polarity bar showing the relay direction can replace the schematic. SET RST COM + COM RST SET 8 64 135 7 SET RST COM + + COM RST SET 8 6 4 21 3 5 7 Diagram shows the "reset" position when terminals 1 and 16 are energized. Energize with reverse polarity to transfer contacts. Diagram shows the "reset" position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts. REFERENCE DATA 1. Maximum switching capacity 2. Life curve (Resistive load) 3. Contact reliability for AC loads Sample: DS2E-M-DC24V 10 pcs. Cycle rate: 20 cpm. Detection level: 200 m 1,000V 1,000 No. of operations, x104 F(t), % 30 V DC 99.9 99.0 95.0 70.0 50.0 30.0 10.0 5.0 10 125 V DC 2.0 1.0 0.5 0.2 10mV 10A 100mA 1A Switching current 0 1 2 Switching current, A 0.1 0 1 A 2 A 12 50V 5V AC AC Contact voltage 250 0.3A 10V 0.5 Weibull probability data 10 100 No. of operations, x104 1,000 190 0.5A VA C 125V AC 100V 100 DS 4-(1). Coil termperature rise (2 Form C single side stable type) Point measured: Inside the coil Ambient temperature: 18 to 19C 64 to 66F 60 Temperature rise, C 50 40 30 20 10 0 3A Temperature rise, C 2A 0A 4-(2). Coil tempeature rise (4 Form C single side stable type) Point measured: Inside the coil Ambient temperature: 17 to 18C 63 to 64F 60 4-(3). Coil temperature rise (2 Form C 2 coil latching type) Point measured: Inside the coil Ambient temperature: 20 to 21C 68 to 70F 60 3A Temperature rise, C 50 2A 40 0A 30 20 10 0 Reset coil Set coil 50 40 30 0A 20 10 0 3A 2A 100 110 Coil applied voltage, %V 100 110 Coil applied voltage, %V 100 110 Coil applied voltage, %V 4-(4). Coil temperature rise (4 Form C 2 coil latching type) Point measured: Inside the coil Ambient temperature: 20C 68F 60 Temperature rise, C 50 40 0A 30 20 10 0 Reset coil Set coil 3A 2A 5. Operate and release time characteristics (2 Form C single side stable type) Test condition: Without diode connected to coil in parallel 4 Operate and release time, ms 6-(1). Influence of adjuacent mounting (1 Form C) Rete of change, % 10 0 Pick-up voltage (1) (2) (3) OFF OFF 3 Operate time (mean) ON ON -10 Drop-out voltage OFF OFF Release time (mean) 1 Rete of change, % 2 10 0 -10 ON ON 100 110 Coil applied voltage, %V 0 80 100 120 Coil applied voltage, % 5 10 .197 .394 Inter-relay distance , mm inch 6-(2). Influence of adjacent mounting (2 Form C) Rete of change, % Pick-up voltage (1) (2) (3) OFF OFF 6-(3). Influence of adjacent mounting (4 Form C) 80 Rete of change, % 60 40 20 0 OFF OFF 10 0 (1) (2) (3) OFF OFF 80 Rete of change, % 60 40 20 0 Drop-out voltage (1) (2) (3) OFF OFF Pick-up voltage ON ON ON ON ON ON -10 Drop-out voltage OFF OFF Rete of change, % OFF OFF 10 0 -10 -20 -40 ON ON -20 -40 ON ON ON ON -60 -80 5 10 .197 .394 Inter-relay distance , mm inch 10 20 .394 .787 Inter-relay distance , mm inch -60 -80 10 20 .394 .787 Inter-relay distance , mm inch For Cautions for Use, see Relay Technical Information 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, 191 Ltd. |
Price & Availability of DS2E-M-DC24V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |