 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MPF930/D TMOS Switching N-Channel -- Enhancement 2 GATE 3 DRAIN MPF930 MPF960 MPF990 1 SOURCE MAXIMUM RATINGS Rating Drain - Source Voltage Drain - Gate Voltage Gate-Source Voltage -- Continuous -- Non-repetitive (tp 50 s) Drain Current Continuous(1) Pulsed(2) Total Device Dissipation @ TA = 25C Derate above 25C Operating and Storage Junction Temperature Range Thermal Resistance Symbol VDS VDG VGS VGSM ID IDM PD 1.0 8.0 TJ, Tstg JA - 55 to 150 125 Watts mW/C C C/W MPF930 35 35 MPF960 60 60 20 40 2.0 3.0 MPF990 90 90 Unit Vdc Vdc Vdc Vpk Adc 1 2 3 CASE 29-05, STYLE 22 TO-92 (TO-226AE) ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Drain-Source Breakdown Voltage (VGS = 0, ID = 10 Adc) V(BR)DSX MPF930 MPF960 MPF990 IGSS 35 60 90 -- -- -- -- -- -- -- -- 50 nAdc Vdc Gate Reverse Current (VGS = 15 Vdc, VDS = 0) ON CHARACTERISTICS(2) Zero-Gate-Voltage Drain Current (VDS = Maximum Rating, VGS = 0) Gate Threshold Voltage (ID = 1.0 mAdc, VDS = VGS) Drain-Source On-Voltage (VGS = 10 Vdc) (ID = 0.5 Adc) MPF930 MPF960 MPF990 MPF930 MPF960 MPF990 MPF930 MPF960 MPF990 IDSS VGS(Th) VDS(on) -- -- -- -- -- -- -- -- -- 0.4 0.6 0.6 0.9 1.2 1.2 2.2 2.8 2.8 0.7 0.8 1.2 1.4 1.7 2.4 3.0 3.5 4.8 -- 1.0 -- -- 10 3.5 Adc Vdc Vdc (ID = 1.0 Adc) (ID = 2.0 Adc) 1. The Power Dissipation of the package may result in a lower continuous drain current. 2. Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%. v v REV 2 Motorola Small-Signal Transistors, FETs and Diodes Device Data (c) Motorola, Inc. 1997 1 MPF930 MPF960 MPF990 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued) Characteristic Symbol Min Typ Max Unit ON CHARACTERISTICS(2) (Continued) Static Drain-Source On Resistance (VGS = 10 Vdc, ID = 1.0 Adc) rDS(on) MPF930 MPF960 MPF990 ID(on) -- -- -- 1.0 0.9 1.2 1.2 2.0 1.4 1.7 2.0 -- Amps On-State Drain Current (VDS = 25 Vdc, VGS = 10 Vdc) SMALL- SIGNAL CHARACTERISTICS Input Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Reverse Transfer Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Output Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Forward Transconductance (VDS = 25 Vdc, ID = 0.5 Adc) Ciss Crss Coss gfs -- -- -- 200 70 20 49 380 -- -- -- -- pF pF pF mmhos SWITCHING CHARACTERISTICS Turn-On Time Turn-Off Time 2. Pulse Test: Pulse Width ton -- -- 7.0 7.0 15 15 ns ns toff v 300 s, Duty Cycle v 2.0%. RESISTIVE SWITCHING +25 V 23 PULSE GENERATOR Vin 40 pF 50 50 1.0 M 20 dB 50 ATTENUATOR TO SAMPLING SCOPE 50 INPUT Vout ton 90% toff 90% 10% 90% 10 V INPUT Vin 50% 10% PULSE WIDTH 50% OUTPUT V INVERTED out Figure 1. Switching Test Circuit Figure 2. Switching Waveforms 2 Motorola Small-Signal Transistors, FETs and Diodes Device Data MPF930 MPF960 MPF990 V DS , DRAIN-SOURCE VOLTAGE (VOLTS) 10 5.0 C, CAPACITANCE (pF) VGS = 10 V 2.0 1.0 0.5 0.2 0.1 -55 200 180 160 140 120 100 80 60 40 20 -35 -15 85 105 +5.0 25 45 65 TJ, JUNCTION TEMPERATURE (C) 125 145 0 0 5.0 10 20 30 40 VDS, DRAIN - SOURCE VOLTAGE (VOLTS) 50 Crss Ciss Coss VGS = 0 V Figure 3. On Voltage versus Temperature Figure 4. Capacitance Variation 2.4 ID(on), DRAIN CURRENT (AMPS) ID(on), DRAIN CURRENT (AMPS) 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 VGS, GATE - SOURCE VOLTAGE (VOLTS) 9.0 10 VDS = 10 V 2.8 VGS = 10 V 2.4 9.0 V 2.0 1.6 7.0 V 1.2 6.0 V 0.8 5.0 V 0.4 0 0 5.0 10 20 30 40 VDS, DRAIN - SOURCE VOLTAGE (VOLTS) 4.0 V 50 8.0 V Figure 5. Transfer Characteristic Figure 6. Output Characteristic 2.8 ID(on), DRAIN CURRENT (AMPS) 2.4 2.0 1.6 VGS = 10 V 9.0 V 8.0 V 7.0 V 1.2 6.0 V 0.8 5.0 V 0.4 0.2 0 0.5 1.0 2.0 3.0 4.0 VDS, DRAIN - SOURCE VOLTAGE (VOLTS) 4.0 V 3.0 V 5.0 Figure 7. Saturation Characteristic Motorola Small-Signal Transistors, FETs and Diodes Device Data 3 MPF930 MPF960 MPF990 PACKAGE DIMENSIONS A R P F L B SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.135 --- 0.135 --- MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.56 0.41 0.48 1.15 1.39 2.42 2.66 0.46 0.61 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 3.43 --- 3.43 --- K DIM A B C D F G H J K L N P R V XX G H V 123 D J SECTION X-X NC N CASE 029-05 (TO-226AE) ISSUE AD STYLE 22: PIN 1. SOURCE 2. GATE 3. DRAIN Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 4 MPF930/D Motorola Small-Signal Transistors, FETs and Diodes Device Data |
Price & Availability of MPF930
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |