 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Data Sheet No. PD 10046B Series PVX6012 Microelectronic Power IC Relay IGBT Photovoltaic Relay Single Pole, Normally Open, 0-280VAC (RMS) or 0-400VDC, 1.0A AC/DC General Description The PVX6012 Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes an IGBT output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. The PVX6012 is ideally suited for switching medium power loads. It offers high operating speed, low and stable on-state voltage drop as well as low off-state leakage current. PVX6012 relays are packaged in a 14-pin, molded DIP package in thru-hole. It is available in standard plastic shipping tubes. Features IGBT and HEXFRED output Bounce-free operation 3,750 VRMS I/O isolation High load current capacity Low off-state leakage current Solid-State reliability UL recognized and CSA certified Applications Test Equipment Industrial Controls and Automation Electromechanical Relay Replacement Mercury-wetted Relay Replacement Part Identification PVX6012 through-hole PVX6012 Electrical Specifications (-40C TA +85C unless otherwise specified) INPUT CHARACTERISTICS Minimum Control Current (see figure 1) Maximum Control Current for Off-State Leakage @TA =+25C Control Current Range (Caution: current limit input LED, see figure 6) Maximum Reverse Voltage Limits 5.0 0.4 5.0 to 25 7.0 Units mA mA mA V OUTPUT CHARACTERISTICS Transient Overvoltage Protection Operating Voltage Maximum Load Current @ TA = +40C 5mA Control (see figure 1 and Note 1) Maximum Surge Current non-repetitive, 1 sec. non-repetitive 20 msec. (see figure 2) Maximum On-State Voltage Drop @TA =+25C For 1A pulsed load, 5mA Control (see figures 3 and 4) Maximum Off-State Leakage @TA =+25C, 400V (see figure 5) Maximum Turn-On Time @TA =+25C (see figure 8) For 1A, 400 VDC load, 5mA Control Maximum Turn-Off Time @TA =+25C (see figure 8) For 1A, 400 VDC load, 5mA Control Maximum Output Capacitance @ 100VDC (see figure 7) Limits 600 0-280 0-400 1.0 1.0 5 20 2.5 10 7 1 50 Units V(DC or AC peak) V(AC) RMS V(DC) A(DC) A (AC) RMS A(DC) A(DC) V A ms ms pF GENERAL CHARACTERISTICS Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output @TA =+25C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage Limits 3750 1012 1.0 +260 -40 to +85 -40 to +100 Units VRMS pF C Connection Diagram Notes: Load handling capability to 0.2 power factor requires overvoltage protection. 2 www.irf.com Series PVX6012 1.4 25 Max. DC Surge Current (A) 0 20 40 60 80 100 1.2 20 Load Current (Amps) 1 0.8 0.6 0.4 0.2 0 15 10 5 0 0.01 0.02 0.05 0.1 0.5 1 5 10 Am bient Tem perature (deg. C) Surge Duration (Sec.) Figure 1. Current Derating Curve 1.1 Figure 2. Surge Current Capability 2.5 2.0 Vf-On (Normalized to 25 deg. C) 1.5 1.0 1.05 Load Current (Amps) 0.5 0.0 -0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 Voltage Drop (Vdd) 1 -3.0 -2.5 -2.0 -1.5 -1.0 0.5 1.0 1.5 2.0 2.5 3.0 0.95 0.9 -50 -25 0 25 50 75 100 125 Ambient Temperature (deg.C) Figure 3. Ouput Characteristics 1000 Figure 4. Typical Normalized VCEON C limit g Icoff/Icoff 25 deg. C TYPICAL 10 ce & +85 0.1 -35 -15 5 25 45 65 85 105 LED Forward Voltage Drop (Voltage DC) Ambient Temperature (deg. C) Figure 5. Typical Normalized Off-State Leakage Figure 6. Input Characteristics (Current Controlled) www.irf.com max. devi ce & min. devi -45C lim it CAUTION: Provide current limiting so that 25 mA max. steady-state control current rating is not exceeded. 3 PVX6012 30 6 Typical Capacitance (pF) Delay Time (milliseconds) 28 26 (p 24 22 p 20 18 yp 16 14 12 10 100 5 4 TON 3 2 1 0 5 10 20 TOFF 200 300 400 500 Vcc, Collector to Collector Voltage (V) LED Current (mA) Figure 7. Typical Output Capacitance Figure 8. Typical Delay Times Figure 9. Delay Time Definitions Case Outline 01-3062 00 8/5/2000 4 www.irf.com |
Price & Availability of PVX6012
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |