Part Number Hot Search : 
JHV348 CDP1853D 00405 154M0 VFC219SA 00405 75733 L7421
Product Description
Full Text Search
 

To Download CY2304NZ Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 4NZ
CY2304NZ
Four Output PCI-X and General Purpose Buffer
Features
* One input to four output buffer/driver * General-purpose or PCI-X clock buffer * Buffers all frequencies from DC to 140 MHz * Output-to-output skew less than 100 ps * Space-saving 8-pin TSSOP package * 3.3V operation BUF_IN L H L H
Functional Description
The CY2304NZ is a low-cost buffer designed to distribute high-speed clocks for PCI-X and other applications. The device operates at 3.3V and outputs can run up to 140 MHz. Table 1. Function Table. Inputs OE L L H H Outputs Output [1:4] L L L H
Block Diagram
OE BUF_IN OUTPUT1 OUTPUT2 OUTPUT3 OUTPUT4
Logic Control
Pin Configuration
8 TSSOP Top View
BUF_IN OE OUTPUT1 GND
1 2 3 4 8 7 6 5
OUTPUT4 OUTPUT3 VDD OUTPUT2
Pin Description for CY2304NZ
Signal VDD GND BUF_IN OUTPUT [1:4] OE Pin 6 4 1 3, 5, 7, 8 2 3.3V voltage supply Ground Input clock Outputs Input pin for output enable, active HIGH. Description
Cypress Semiconductor Corporation Document #: 38-07099 Rev. *B
*
3901 North First Street
*
San Jose
*
CA 95134 * 408-943-2600 Revised December 14, 2002
CY2304NZ
Maximum Ratings
Supply Voltage to Ground Potential ........ -0.5V to VDD +0.5V DC Input Voltage (Except REF) .............-0.5V to VDD +0.5V DC Input Voltage REF............................. -0.5V to VDD +0.5V Storage Temperature ................................. -65C to +150C Max. Soldering Temperature (10 sec.) ....................... 260C Junction Temperature................................................. 150C Static Discharge Voltage (per MIL-STD-883, Method 3015) ........................... > 2,000V
Operating Conditions
Parameter VDD TA CL CIN Supply Voltage Operating Temperature (Ambient Temperature) Load Capacitance Input Capacitance DC 0.05 Power-up time for all VDD's to reach minimum specified voltage (power ramps must be monotonic) Description Min. 3.0 -40 Max. 3.6 85 25 7 140 50 Unit V
C
pF pF MHz ms
BUF_IN, OUTPUT [1:4] Operating Frequency tPU
Electrical Characteristics
Parameter VIL VIH IIL IIH VOL VOH IDD Description Input LOW Voltage
[1]
Test Conditions
Min. 2.0
Max. 0.8
Unit V V A A V V V V
Input HIGH Voltage[1] Input LOW Current Input HIGH Current Output LOW Voltage[2]
[2]
VIN = 0V VIN = VDD IOL = 24 mA IOL = 12 mA IOH = -24 mA IOH = -12 mA Unloaded outputs at 66.66 MHz
-5 -5
5 5 0.8 0.55
Output HIGH Voltage Supply Current
2.0 2.4 25
mA
Switching Characteristics[3] for Commercial and Industrial Temperature Devices
Parameter t3 t4 t5 t6 Name Duty Cycle
[2]
Description Measured at 1.5V Measured between 0.8V and 2.0V Measured between 0.8V and 2.0V All outputs equally loaded Measured at VDD/2
Min. 40.0
Typ. 50.0
Max. 60.0 1.50 1.50 100
Unit % ns ns ps ns
= t2 / t1
Rise Time[2] Fall Time[2] Output to Output Skew[2] Propagation Delay, BUF_IN Rising Edge to OUTPUT Rising Edge[2]
2.5
3.5
5
Notes: 1. BUF_IN input has a threshold voltage of VDD/2. 2. Parameter is guaranteed by design and characterization. It is not 100% tested in production. 3. All parameters specified with loaded outputs.
Document #: 38-07099 Rev. *B
Page 2 of 5
CY2304NZ
Switching Waveforms
Duty Cycle Timing
t1 t2 1.5V 1.5V 1.5V
All Outputs Rise/Fall Time
2.0V 0.8V t3 2.0V 0.8V t4 3.3V 0V
OUTPUT
Output-Output Skew
OUTPUT
1.5V
OUTPUT t5
1.5V
Input-Output Propagation Delay
INPUT
VDD/2
OUTPUT t6
VDD/2
Document #: 38-07099 Rev. *B
Page 3 of 5
CY2304NZ
Ordering Information
Ordering Code CY2304NZZC-1 CY2304NZZC-1T CY2304NZZI-1 CY2304NZZI-1T 8-pin TSSOP 8-pin TSSOP - Tape and Reel 8-pin TSSOP 8-pin TSSOP - Tape and Reel Package Type Operating Range Commercial, 0C to 70C Commercial, 0C to 70C Industrial, -40C to 85C Industrial, -40C to 85C
Package Diagram
8-pin Thin Shrunk Small Outline Package (4.40 MM Body) Z8
51-85093-**
All product and company names mentioned in this document are the trademarks of their respective holders.
Document #: 38-07099 Rev. *B
Page 4 of 5
(c) Cypress Semiconductor Corporation, 2002. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.
CY2304NZ
Document History Page
Document Title: CY2304NZ Four Output PCI-X and General Purpose Buffer Document Number: 38-07099 REV. ** *A *B ECN NO. 111420 118610 121820 Issue Date 02/12/02 09/25/02 12/14/02 Orig. of Change IKA HWT RBI New Data Sheet Added Industrial Temperature Range in the Ordering Information Power up requirements added to Operating Conditions Information Description of Change
Document #: 38-07099 Rev. *B
Page 5 of 5


▲Up To Search▲   

 
Price & Availability of CY2304NZ

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X