 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20506 rev. A 02/03 60CTT015 TRENCH SCHOTTKY RECTIFIER 60 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform Per Device VRRM IFSM VF TJ @ tp = 5 s sine @ 30 Apk, TJ = 125C (typical) per leg range - 55 to 125 C 15 1850 0.28 V A V Description/ Features Units A This center tap Schottky rectifier has been optimized for low forward voltage drop. The proprietary sub-micron technology allows for low power loss both in forward and reverse conduction. 125 C TJ operation Center tap configuration Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Values 60 Case Styles 60CTT015 Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode TO-220 www.irf.com 1 60CTT015 Bulletin PD-20506 rev. A 02/03 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) @ TJ = 125C 60CTT015 15 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR Surge Current (Per Leg) Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) (Per Leg) (Per Device) Values 30 60 1850 360 9.0 2 Units A Conditions 50% duty cycle @ TC = 105C, rectangular wave form Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 5s Sine or 3s Rect. pulse TJ = 25 C, IAS = 2 Amps, L = 4.5 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive A mJ A Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) (1) Typ 0.36 0.44 0.28 0.39 Max Units 0.40 0.49 0.32 0.45 3.5 600 V V V V mA mA pF nH Conditions @ 30A @ 60A @ 30A @ 60A TJ = 25 C TJ = 125 C VR =10VDC(test signal range100KHz to1MHz)25C Measured lead to lead 5mm from package body VR = rated VR TJ = 125C TJ = 25C IRM CT LS Max. Reverse Leakage Current (Per Leg) Series Inductance (Per Leg) (1) Junction Capacitance (Per Leg) 2.0 450 2900 8.0 - dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle < 2% 10000 V/s (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values -55 to 125 -55 to 150 1.2 0.5 2 (0.07) Min. Max. 6 (5) 12 (10) Units C C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthCS Typical Thermal Resistance, Case wt T to Heatsink Approximate Weight Mounting Torque Case Style C/W DC operation C/W Mounting surface , smooth and greased g (oz.) Kg-cm (Ibf-in) TO-220AB 2 www.irf.com 60CTT015 Bulletin PD-20506 rev. A 02/03 1000 Reverse Current - I R (mA) 1000 Tj = 125C 100C 100 75C 10 50C 25C Instantaneous Forward Current - I F (A) 100 1 0 2 4 6 8 10 12 14 16 Reverse Voltage - VR (V) T = 125C J T = 25C J Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 10000 Junction Capacitance - C T (p F) T = 25C J 10 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 1000 4 6 8 10 12 14 16 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 10 (C/W) thJC Thermal Impedance Z 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single Pulse (Thermal Resistance) Notes: PDM t1 t2 0.1 1. Duty factor D = t1 / t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 60CTT015 Bulletin PD-20506 rev. A 02/03 130 Allowable Case Temperature (C) Average Power Loss (Watts) 20 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit DC 125 120 115 110 105 Square wave (D = 0.50) 100 80% Vr applied DC 15 10 5 95 see note (2) 90 0 5 10 15 20 25 30 35 40 45 (A) F(AV) Average Forward Current - I 0 0 10 20 30 40 50 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 1000 100 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L HIGH-S PEED S CH WIT FREE-WHEEL DIODE 40HF L40S 02 Vd = 25 Volt DUT IR FP460 R = 25 ohm g + CURR ENT MONIT OR Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ 80% VR applied 4 www.irf.com 60CTT015 Bulletin PD-20506 rev. A 02/03 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) Base Common Cathode 2 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 1.22 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 0.10 (0.004) 123 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. 1 Anode 2 Common Cathode 3 Anode Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/03 www.irf.com 5 |
Price & Availability of 60CTT015
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |