![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Surface Mount Voltage Controlled Oscillator V42100 V42100 Surface Mount Voltage Controlled Oscillator WLAN 2050 - 2150 MHz Features * * * * Miniature SMT Package Low Phase Noise Highly Linear Tuning +3V Operation LSM4 Package 2.0 0.5 7.6 6.9 IDENT VCC M/ A- COM Description The V42100 is a fundamental single ended oscillator designed for use in cost sensitive wireless applications. The VCO integrates a bipolar transistor, varactor diode and high Q resonator in a surface mount package. The standard SMT packaging provides electrical shielding and easy PCB assembly. The circuit design and component device selection have been optimised for low phase noise and highly linear tuning performance. M/A-COM VCOs are manufactured in facilities using advanced surface mount assembly and automated electrical test equipment. This ensures consistent electrical performance and product quality over volume manufacturing quantities. 2.0 1.0 RF 1.3 PLATED AREA 12 1 3.0 4.6 3 3.0 0.7 1.3 DETAIL A. DETAIL A. Electrical Specifications , TA = +25C, VCC = +3V (unless otherwise stated) Parameter Frequency Range (FOUT) Tuning Voltage (VT) Harmonic Output Phase Noise 5 4 2 3 1 Test Conditions Over TOP Over TOP Over TOP SSB at 10 kHz offset from carrier SSB at 100 kHz offset from carrier 6 7 Units MHz V dBm dBc dBc/Hz dBc/Hz MHz/V Ratio MHz/V MHz MHz/C pF mA Min. 2050 +0.6 +5.0 Typ. Max. 2150 +4.0 +10.0 RF Output Power (POUT) -20 -87 -108 100 1.4 5 10 -0.51 50 13 +2.85 18 +3.15 10 12 -82 -103 Average Tuning Sensitivity Tuning Linearity Frequency Pushing Frequency Pulling Frequency Drift Tune Input Capacitance Supply Current (ICC) Supply Voltage (VCC) VCC +3V 0.15V Over all phases of a 1.14:1 VSWR load Over TOP Recommended operating limit 4. 5. 6. 7. V 1. All specification limits are indicated values and apply over FOUT and for 50 load impedance. 2. Tuning voltages shown are the minimum and maximum voltages required to tune the frequency range, including temperature effects over 0C to +70C. Devices will oscillate normally with tuning voltages from 0V to +6V. 3. Output power window includes variation over operating temperature range (TOP) 0C to +70C and output frequency range (FOUT). Non harmonic spurious less than -70 dBc. See plot for typical phase noise at other offset frequencies. Defined as (2150 - 2050) / (VT 2150 - VT 2050) MHz/V. The max/min ratio of tuning sensitivity over FOUT, see plot for typical tuning linearity measured over 0.5V intervals 7.6 PART NO. 6.9 VT V2.00 M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Surface Mount Voltage Controlled Oscillator V42100 Functional Configuration Pin 1 2 3 Case/Lid Substrate material is RO4003. Absolute Maximum Ratings Parameter Tuning Voltage (VT) 3 Supply Voltage (VCC) Storage Temperature (TSTOR) Solder Assembly Temperature 1, 2 Function Tuning Voltage (VT) RF Output Supply Voltage (VCC) Ground Absolute Maximum 0V to +9V +5V -45C to +125C See App Note M2032 Environmental Specifications Devices are designed to function over the operating temperature range (TOP) of 0C to +70C and after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and subscriber terminal environments. 1. Exceeding these limits may cause permanent damage. 2. Static sensitive, observe appropriate handling precautions. 3. An external series resistor and bypass capacitor will allow operation at higher supply voltage and will improve power supply decoupling and noise suppression. Ordering Information VCOs are available in either tape and reel or tube packaging. To order devices in tape and reel requires the suffix TR be added to the part number, i.e. V42100TR. Quantity 1500 per 13 inch reel, see Application Note M2037. Typical Performance Tuning Curve 2.4 FREQUENCY (GHz) 2.3 2.2 2.1 2.0 1.9 1.8 0.0 1.0 2.0 3.0 4.0 TUNING VOLTAGE (V) 5.0 6.0 FREQUENCY (GHz) 2.20 2.15 2.10 2.05 2.00 1.4 Tuning Curve vs Temperature 0 C +25 C +70 C 1.6 1.8 2.0 2.2 2.4 2.6 2.8 TUNING VOLTAGE (V) 3.0 3.2 TUNING SENSITIVITY (MHz/V) Tuning Linearity 180 160 140 120 100 80 60 40 20 0 0.0 1.0 2.0 3.0 4.0 TUNING VOLTAGE (V) 5.0 6.0 PHASE NOISE (dBc/Hz) -40 -60 -80 -100 -120 -140 Phase Noise -160 100 1K 10K 100K 1M FREQUENCY OFFSET FROM CARRIER (Hz) 10M Output Power vs Temperature OUTPUT POWER (dBm) OUTPUT POWER (dBm) 10.0 9.0 8.0 7.0 6.0 5.0 4.0 1.95 2.00 2.05 2.10 2.15 FREQUENCY (GHz) 2.20 2.25 +70 C +25 C 0 C Output Power vs Supply Voltage (Vcc) 10.0 9.0 8.0 7.0 6.0 5.0 4.0 1.95 2.00 2.05 2.10 2.15 FREQUENCY (GHz) 2.20 2.25 V2.00 2.85 V 3.00 V 3.15 V M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. |
Price & Availability of V42100
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |