 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| APLUS AVxx16 Series GENERAL DESCRIPTION: The AVH316B, AVH316C, AVH316D, AV0716C, AV0716D, AV1416D, AV2116A, AV2816A is a single-chip synthesizing CMOS VLSI that can synthesize voice up to 3.5,7,14,21,28 seconds using APLUS qualified coding algorithm (LOGPCM). Customer speech data will be edited and programmed into ROM by changing one mask during one mask during the device fabrication. FEATURES: 1. Single power supply can operate from 2.4v through 5v. 2. The total voice duration is about 3.5,7,14,21,28,42 seconds could be partitioned up to 16 voice sections. Each voice section could have 4 playing lengths; the longest one is the origional voice+mute length. 3. Voice + mute length could up to 22 seconds ( 11 seconds in AVH316 ) (6k sampling rate) for each voice section. 4. One 112 voice-steps table, could be partitioned up to 16 subtables of steps. 5. 5 mask option of playback speed : 1> 4.3K ; 2> 5.0K ; 3> 6.0K ; 4> 7.5K ; 5> 10.0K ( Hz ) 6. 1 trigger input (TG): with resistive schmitt input (270K---1M) for CDS interface. sequential function : once the input was triggered sequentially the device will response by one subtable of voice_step sequentially and cyclically , from subtable_m ( m= 1 -16 ) to user defined subtable_n ( n= 1 - 16 ) . random function : Once the input was trigger , the device will response from subtable_m ( m: 1 - 16 ) to subtable_n ( n: 1 - 16 ) at random . snooze function : use 2 subtables : 1st stores ringing voice , playing when time's up. 2nd stores ( greeting sound + ) snooze time . 7.Has two debounce time : 10 ms, 50 us. with following mask option A>50us B>10ms C>IO1(VDD-50us,GND-10ms) D>IO2(VDD-50us,GND-10ms) C,D,E;could only be selected when IO1,IO2,IO3 are mask_option as control input . E>IO3(VDD-50us,GND-10ms) 8. Automatic Rosc selection : enable - the device will use external Rosc if it has external Rosc ; the device will use internal Rosc automatically if it hasn't external Rosc . ( It must be determined before operation ) disable - use external Rosc only . IO2 - VDD : disable Internal Rosc options : (mask option) GND : enable For VH316B ,AVH316C ,AVH316D ,AV0716C ,AV0716D ,AV1416D ,AV2116A , AV2816A : playback speed(khz) 4.3 5 6 7.5 10 A 8.9 10.3 12.4 15.5 20.7 B 8.6 10 12 15 20 C 7.9 9.2 11 13.8 18.3 D 7 8.2 9.8 12.3 16.3 E 6.3 7.3 8.8 11 14.7 F 5.8 6.8 8.1 10.1 13.5 G 5.4 6.3 7.5 9.4 12.5 H 5.1 5.9 7.1 8.9 11.8 I 4.7 5.5 6.6 8.3 11 J 4.3 5 6 7.5 10 K 4.1 4.8 5.7 7.1 9.5 L 3.9 4.6 5.5 6.9 9.2 M 3.6 4.2 5 6.3 8.3 www.aplusinc.com.tw Page 1 / 9 2002-Rev.2 APLUS EDGE/LEVEL A>EDGE B>LEVEL HOLD/UNHOLD A>HOLD B>UNHOLD C>IO1(VDD-hold,GND-unhold) D>IO2(VDD-hold,GND-unhold) E>IO3(VDD-hold,GND-unhold) RETRIGGERING/IRRETRIGGER A>IRRETRIGGER B>RETRIGGER C>IO1(VDD-irretrigger,GND-retrigger) D>IO2(VDD-irretrigger,GND-retrigger) E>IO3(VDD-irretrigger,GND-retrigger) AVxx16 Serie 9. Playing mode :EDGEL/LEVEL , HOLD/UNHOLD , RETRIGGER/IRRETRIGGER with following mask options : C>IO1(VDD-edge.GND-level) D>IO2(VDD-edge.GND-level) E>IO3(VDD-edge.GND-level) C, D, E could only be selected when IO1,IO2,IO3 are mask_option as control input . 10. 3 I/O PINS WITH FOLLOWING OPTIONS: * IO1 A>COUT B>STOPH C>STOPL D>BUSYH G>DYNA1/4 E>BUSYL F>6HZ H>DYN2/4 I>DYN3/4 * IO2 A>PWM1 B>STOPH D>BUSYH G>DYNA1/4 C>STOPL * IO3 A>PWM2 D>BUSYH B>STOPH C>STOPL E>BUSYL F>6HZ I>DYN3/4 E>BUSYL F>6HZ H>DYN2/4 I>DYN3/4 G>DYNA1/4 H>DYN2/4 J>USED AS CONTROL INPUT J>USED AS CONTROL INPUT J>USED AS CONTROL INPUT Item_F : 0.75Hz or 1.5Hz or 3Hz or 6Hz(mask option) Item_B~I : with one subtable enable status option for IO1, IO2, IO3. COUT : 3 current output levels, with 4 mask options (1.5mA;3mA;4.5mA;IO3 : AVH316B ,AVH316C ,AVH316D ,AV0716C ,AV0716D ,AV1416D ,AV2116A,AV2816A CMOS VLSILOGPCM3.5714212842 ROM 1. 2.4 - 5 2. 3.571421284216(section) ( +) www.aplusinc.com.tw Page 2 / 9 2002-Rev.2 APLUS AVxx16 Serie 3. (+) 22( 11in AVH316 ) (6kHz ) 4. 112(VOICE - STEPS)16(subtable) 5. 5:1>4.3k ; 2>5k ; 3>6k ; 4>7.5k ; 5>10k Hz 6. (TG)(270K-1M)(CDS) (SEQUENTIAL)(subtable) 1 (subtable n ; n=1 - 16 ) (RANDOM)m (m)n(n ) , (SNOOZE),1 2 7. (DEBOUNCE)10ms-, 50us-, A>50us , B>10ms , C>IO1(VDD-50us,GND-10ms) , D>IO2(VDD-50us,GND-10ms) , E>IO3(VDD-50us,GND-10ms) , C,D,E ,IO1,IO2,IO3 8. (): A). - ,;, ( B). - C). IO2VDD - GND - D). () For AVH316B ,AVH316C ,AVH316D ,AV0716C ,AV0716D ,AV1416D ,AV2116A ,AV2816A : A B C D E F G H I J K L M 4.3 5 6 7.5 10 8.9 10.3 12.4 15.5 20.7 8.6 10 12 15 20 7.9 9.2 11 13.8 18.3 7 8.2 9.8 12.3 16.3 6.3 7.3 8.8 11 14.7 5.8 6.8 8.1 10.1 13.5 5.4 6.3 7.5 9.4 12.5 5.1 5.9 7.1 8.9 11.8 4.7 5.5 6.6 8.3 11 4.3 5 6 7.5 10 4.1 4.8 5.7 7.1 9.5 3.9 4.6 5.5 6.9 9.2 3.6 4.2 5 6.3 8.3 9. / (EDGE / LEVEL) / ( HOLD / UNHOLD) / (RETRIGGER / IRRETRIGGER) I01(VDD-,GND) I02(VDD-,GND) I03(VDD-,GND) I01 (VDD- GND-) I02 (VDD- GND-) I03 (VDD- GND-) I01 (VDD-GND-) I02 (VDD-GND-) I03 (VDD-GND-) C,D,E ,IO1,IO2,IO3 www.aplusinc.com.tw Page 3 / 9 2002-Rev.2 APLUS AVxx16 Serie 10.I/O PINS IO1 A) COUT B) . C) . D) . E) . F) LED 6HZ. G) LED 1/4. H) LED 2/4. I) LED 3/4. J) IO2 A) PWM1 B). C) . D) . E) . F) LED 6HZ. G) LED 1/4. H) LED 2/4. I) LED 3/4. J) IO3 A) .PWM2 B). C) . D) . E) . F) LED 6HZ. G) LED 1/4. H) LED 2/4. I) LED 3/4. J) F : LED 0.75HzLED 1.5HzLED 3Hz LED 6Hz B - I :, IO1, IO2IO3(subtable) COUT3, 4 (1.5mA3.0mA4.5mA IO3 www.aplusinc.com.tw Page 4 / 9 2002-Rev.2 APLUS PAD NAME VDD OSC TEST TG IO1,IO2,IO3 VSS AVxx16 Serie PIN DESCRIPTION : PIN ATTR. POWER I I I I/O POWER FUNCTION POSITIVE POWER SUPPLY. OSCILLATOR INPUT (300K ohm CONNECT TO VDD). TEST PAD,FOR PRODUCTION TESTING (TEST HIGH FOR TESTING) TRIGGER INPUT, INTERNAL PULL LOW (HIGH ACTIVE). AUDIO SIGNAL; STATUS OUTPUT; CONTROL INPUT. NEGATIVE POWER SUPPLY. ABSOLUTE MAXIMUM RATING : SYMBOL VDD~VSS VIN (FOR ALL INPUT) VOUT (FOR ALL OUTPUT) T (OPERATING) T (STORAGE) RATING -0.5~+7.0 VSS-0.3 SYMBOL VDD Isb Iop Iih Iil Ico PARAMETER OPERATING VOLTAGE SUPPLY STANDBY CURRENT OPERATING TG IO1 USE AS CURRENT OUT (FULL SCALE) IO1,IO2,IO3 USE AS CONTROL INPUT IO1,IO2,IO3 USE AS STATUS OUTPUT DURING OPERATING FREQUENCY STABILITY Fosc VARIATION MIN. 2.4 TYP. 3 MAX. 5 0.1 200 UNIT V uA uA -1.8 -3.6 -5.4 0.5 mA CONDITION VDD=3V ,I/O OPEN (WITH Rosc) VDD=3V VDD=3V, V O/P=0.7V -1.2 -2.4 -3.6 5 0 -1.5 -3 -4.5 0 min:-0.9 max:-1.4 10 Iih Iil Ioh Iol dF/F dF/F uA mA VDD=3V VDD=3V, V O/P=0V VDD=3V, V O/P=3V Fosc(3v)-Fosc(2.4v) Fosc (3v) VDD=3V,Rosc=300K (Rosc=180K in AV1416 ) 8 -10 -10 12 10 10 % % www.aplusinc.com.tw Page 5 / 9 2002-Rev.2 APLUS AVxx16 Serie www.aplusinc.com.tw Page 6 / 9 2002-Rev.2 APLUS AVxx16 Serie APPLICATION CIRCUIT: A> IO1 -- COUT ; IO2 -- LED ; IO3 -- CONTROL INPUT. Rosc busy,3Hz,6Hz,or dynamic VDD IO2 LED TG IO3 GND S ( 8 ohm SPEAKER ) IO1 T ( 8050 ) B> IO1 -- LED ; IO2,IO3 --8,32,64 ohm SPEAKER OR BUZZER. Rosc VDD TG IO1 LED busy,3Hz,6Hz,or dynamic IO2 GND IO3 S (BUZZER OR 8,32,64 ohm SPEAKER ) C> IO1 -- COUT ; IO2,IO3 -- 8,32,64 ohm SPEAKER OR BUZZER. Rosc S ( 8 ohm SPEAKER ) VDD TG IO1 IO2 GND IO3 T ( 8050 ) S (BUZZER OR 8,32,64 ohm SPEAKER ) NOTE: 1>Rosc=300K ohm ( Rosc=180K ohm in AMA140A ) ( typical ) , or use internal Rosc ( it must be determined before operation ) Tbata=130( typical ) 2>BUZZER:resonant frequency should around 1KHz. 3>Input switch could be replace by CDS. 4>COUT,PWM1,PWM2 are tristate during standby. www.aplusinc.com.tw Page 7 / 9 2002-Rev.2 APLUS AVxx16 Serie APPLICATION CIRCUITS : D > SNOOZE FUNCTION timer switch Rosc OSC TG VDD IO1 IO2 IO3 ( BUZZER or 8 , 32 , 64 ohm SPEAKER ) S ( 8 ohm SPEAKER ) T ( 8050 ) ( normal on switch ) GND www.aplusinc.com.tw Page 8 / 9 2002-Rev.2 APLUS DIE SIZE: X 1450 1470 1450 1470 1470 1470 1470 Y 1080 1100 1230 1250 1610 1970 2370 PAD Size ( um^2 ) 80 * 80 80 * 80 80 * 80 80 * 80 80 * 80 80 * 80 80 * 80 AVxx16 Serie Substrate GND GND GND GND GND GND GND UNIT um um um um um um um PRODUCT AVH316B AVH316C AVH316D AV0716C AV0716D AV1416D AV2116A AV2816A PIN NO. 1 2 3 4 5 6 7 8 9 10 NAME AVH316B AVH316C AVH316D X Y -606.1 -606.1 -485.2 -364.3 -243.4 -116.8 43.8 274 354.6 574.9 -197.4 -378.9 -378.9 -378.9 -378.9 -378.9 -354.3 -374.2 -374.2 -354.3 AV0716C AV0716D X -606.1 -606.1 -485.2 -364.3 -243.4 -116.8 43.8 274 354.6 574.9 AV1416D X -606.1 -606.1 -485.2 -364.3 -243.4 -116.8 43.8 274 354.6 574.9 AV2116A X -606.1 -606.1 -485.2 -364.3 -243.4 -116.8 43.8 274 354.6 574.9 Y -278 459.5 459.5 459.5 459.5 459.5 434.8 454.8 454.8 434.8 Y -455.2 -636.7 -636.7 -636.7 -636.7 -636.7 -612.1 -631.9 -631.9 -612.1 Y -637.5 -819.1 -819.1 -819.1 -819.1 -819.1 -794.4 -814.3 -814.3 -794.4 VDD1 OSC TEST TG IO1 VDD IO2 GND GND1 IO3 PIN NO. 1 2 3 4 5 6 7 8 9 10 NAME VDD1 OSC TEST TG IO1 VDD IO2 GND GND1 IO3 AV2816A X Y -606.1 -606.1 -485.2 -364.3 -243.4 -116.8 43.8 274 354.6 574.9 -823.9 -1005.5 -1005.5 -1005.5 -1005.5 -1005.5 -975.4 -995.3 -995.3 -975.4 NOTE : ( 1 ) . All data and specifications are subject to change without notice . ( 2 ) . Both VDD and VDD1 be connected to positive power supply ; GND and GND1 be connected to negative power supply for avoid power supply noise during operation . ( 3 ) . 0.1 uf capacitor be connected between positive and negative power supply were subjected for operating stability . www.aplusinc.com.tw Page 9 / 9 2002-Rev.2 |
Price & Availability of AVH316B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |