![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount with Inner Lens) QTLP653C-7 AlGaAs Red PACKAGE DIMENSIONS 0.063 (1.6) QTLP653C-G Green 0.063 (1.6) TOP 0.043 (1.1) R0.020 (0.5) 5 0.012 [0.3] 0.043 (1.1) 0.126 (3.2) 0.012 (0.3) SIDE 0.079 (2.0) BOTTOM POLARITY MARK (See Note 2) + POLARITY for -G for -7 APPLICATIONS * Keypad backlighting * Push-button backlighting NOTE: 1. Dimensions for all drawings are in inches (mm). 2. Cathode for -G. Anode for -7. DESCRIPTION These surface mount chip LEDs are designed to fit industry standard footprint. They are reverse mountable and designed to emit light through a small cut-out hole in the PC board. FEATURES * Small footprint - 3.2(L) X 1.6(W) X 1.1(H) mm * Wide viewing angle of 130 * Water clear optics * Moisture-proof packaging * Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel (c) 2003 Fairchild Semiconductor Corporation Page 1 of 7 2/13/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount with Inner Lens) QTLP653C-7 AlGaAs Red ABSOLUTE MAXIMUM RATINGS (TA =25C Unless otherwise specified) QTLP653C Parameter Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Lead Soldering Time Symbol -7 IF IFM VR PD TOPR TSTG TSOL 30 180 5 72 -40 to +85 -40 to +90 260 for 5 sec -G 30 100 5 84 mA mA V mW C C C Units QTLP653C-G Green ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25C) QTLP653C Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Spectral Line Half Width (nm) Viewing Angle () VF P D 21/2 2.4 1.9 660 645 20 130 2.8 2.1 565 570 30 130 IF = 20mA IV 25 50 15 35 IF = 20mA Symbol -7 -G Condition IF = 20mA IF = 20mA IF = 20mA (c) 2003 Fairchild Semiconductor Corporation Page 2 of 7 2/13/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount with Inner Lens) QTLP653C-7 AlGaAs Red TYPICAL PERFORMANCE CURVES Fig. 1 Forward Current vs. Forward Voltage 90 2.0 QTLP653C-G Green Fig. 2 Relative Luminous Intensity vs. DC Forward Current IF - FORWARD CURRENT (mA) 70 60 50 40 30 20 10 0 1.0 2.0 2.5 3.0 4.0 5.0 AlGaAs RED GREEN RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) 80 1.5 AlGaAs RED 1.0 0.5 GREEN 0.0 0 5 10 15 20 25 30 VF - FORWARD VOLTAGE (V) IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength GREEN AlGaAs RED 1.0 RELATIVE INTENSITY 0.5 0 300 350 400 450 500 550 600 650 700 750 WAVELENGTH (nm) Fig.5 Maximum Forward Current vs. Ambient Temperature 50 Fig.4 Radiation Diagram -20 -10 0 10 20 30 40 50 60 70 80 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 90 1.0 IF - FORWARD CURRENT (mA) 40 -30 -40 -50 -60 -70 -80 -90 1.0 30 20 10 0 0 20 40 60 80 100 REL. LUMINOUS INTENSITY (%) TA - AMBIENT TEMPERATURE (C) (c) 2003 Fairchild Semiconductor Corporation Page 3 of 7 2/13/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount with Inner Lens) QTLP653C-7 AlGaAs Red RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.063 (1.6) 0.063 (1.6) QTLP653C-G Green 0.063 (1.6) 0.071 (1.8) RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240 C MAX +5 C/s MAX -5 C/s MAX 60 - 120 sec Preheating 120 - 150 C MAX (c) 2003 Fairchild Semiconductor Corporation Page 4 of 7 2/13/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount with Inner Lens) QTLP653C-7 AlGaAs Red TAPE AND REEL DIMENSIONS 2.50.5 QTLP653C-G Green O60.20.5 O178.01 2.50.5 13.21.5 O130.5 16.00.2 Progressive direction 1.75 2.00.05 4.0 1.50 +0.10 -0.0 0.230.1 (sprocket) 3.50.05 8.00.2 4.0 for -G 1.73 1.37 Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm Polarity marks on the sprocket side. 3.51 (c) 2003 Fairchild Semiconductor Corporation Page 5 of 7 2/13/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount with Inner Lens) QTLP653C-7 AlGaAs Red TAPE AND REEL DIMENSIONS 2.50.5 QTLP653C-G Green O60.20.5 O178.01 2.50.5 13.21.5 O130.5 16.00.2 Progressive direction 1.75 2.00.05 4.0 1.50 +0.10 -0.0 0.230.1 (sprocket) 3.50.05 8.00.2 4.0 for -7 1.73 1.37 Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm Polarity marks on the opposite sprocket side. 3.51 (c) 2003 Fairchild Semiconductor Corporation Page 6 of 7 2/13/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount with Inner Lens) QTLP653C-7 AlGaAs Red QTLP653C-G Green DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. (c) 2003 Fairchild Semiconductor Corporation Page 7 of 7 2/13/03 |
Price & Availability of QTLP653C
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |