| PART |
Description |
Maker |
| PC33887VW/R2 MC33887DWB/R2 MC33887PNB/R2 MC33887DH |
5.0 A H-Bridge with Load Current Feedback
5.0 A H-Bridge with Load Current Feedback
|
Motorola, Inc.
Motorola Inc
|
| MC33887VWR2 33887 MC33887DH MC33887DHR2 MC33887DWB |
5.0 A H-Bridge with Load Current Feedback
|
FREESCALE[Freescale Semiconductor, Inc]
|
| TDA8942P TDA8942 |
2 x 1.5 W stereo Bridge Tied Load BTL audio amplifier
2 x 1.5 W stereo Bridge Tied Load (BTL) audio amplifier
|
Philips Semiconductors
NXP Semiconductors
|
| TDA8946J TDA8946J-02 TDA8946 |
2 x 15 W stereo Bridge Tied Load BTL audio amplifier
From old datasheet system
|
PHILIPS[Philips Semiconductors]
|
| ISL6334IRZ ISL6334CRZ ISL6334AIRZ ISL6620 ISL6620A |
VR11.1, 4-Phase PWM Controller with Light Load Efficiency Enhancement and Load Current Monitoring
|
Intersil Corporation
|
| AQY221R2SX AQY221R2SZ |
PhotoMOS relay, RF (radio frequency). 1 form A, R 10 type. Output rating: load voltage 40 V, load current 250 mA.
|
Matsushita Electric Works(Nais)
|
| NCP45540 |
NCP45540 Datasheet - ecoSWITCH™ Advanced Load Management: 18 A Controlled Load Switch with Low R<sub>ON</sub>
|
ON Semiconductor
|
| TC1027CEPR TC1027CEQR TC1027CEOR TC1027 |
The TC1027 is a mixed-function device combining four general purpose comparators and a voltage reference in a single 16-pin package. This increased integration allows the user to replace two packages, which saves space, lowers supply curre
Linear Building Block - Quad Low Power Comparator and Voltage Reference
|
MICROCHIP[Microchip Technology]
|
| AQS610TSX AQS610TSZ |
PhotoMOS relay, GU (general use) type, multi-function (1a1b MOSFET & optocoupler). Output rating load voltage 350V AC/DC, load current 100 mA.
|
Matsushita Electric Works(Nais)
|
| WU400 WU100 WU101 WU102 WU103 WU104 WU105 WU106 WU |
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -12.0 VDC. Output current -400 mA. Input current 10 mA(no load), 2520 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -15.0 VDC. Output current -333 mA. Input current 10 mA(no load), 2510 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 15.0 VDC. Output current 667 mA. Input current 10 mA(no load), 2510 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 10 mA(no load), 2470 mA(full load).
10/15 Watts WU Series 10/15瓦吴系列
Nickel Cadmium Battery; Voltage Rating:1.2V; Battery Size Code:Sub C; Battery Capacity:2100mAh
Nickel Cadmium Battery; Voltage Rating:1.2V; Battery Size Code:Sub C; Battery Capacity:1900mAh; Battery Terminals:Pressure Contact
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 5.0 VDC. Output current 2000 mA. Input current 10 mA(no load), 2620 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 12.0 VDC. Output current 800 mA. Input current 10 mA(no load), 2520 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -5.0 VDC. Output current -1000 mA. Input current 10 mA(no load), 2620 mA(full load).
|
XPiQ
Electronic Theatre Controls, Inc.
ETC[ETC]
List of Unclassifed Manufacturers
International Power Sources
|
| FAITD25J FAITD25G FAITD250 AITD75J FAITD75J FAITD2 |
8-/16-Channel 16-Bit No Latency Delta Sigma ADC; Package: SSOP; No of Pins: 28; Temperature Range: 0°C to 70°C
Regulator; Features: Medium current output; Note: Isolation package; Comments: 60V load dump; V OUT (%): (max /-3)
Regulator; Features: Low current output; Note: Radial tape packing for automatic mounting; Comments: 60V load dump; V OUT (%): (max /-10)
Regulator; Features: Low current output; Note: Surface-mount PW-MOLD(SOT-89) package; Comments: 60V load dump; V OUT (%): (max /-10)
Photorelays (MOSFET Output Devices); Features: 1b (Normaly Close); Package: DIP4; Surface Mount Type: Y/N; Number of Pins: 4; Trigger LED Current
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 20V (25V); Io (lpeak): 0.4A (1.0A); Channel: 1-ch; PWM Drive: n/a; Package: SIP9; RoHS Compatible: yes
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 27V (30V); Io (lpeak): 1A (2A); Channel: 1-ch; PWM Drive: n/a; Package: HSIP10; RoHS Compatible: yes‡
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 20V (25V); Io (lpeak): 0.4A (1.2A); Channel: 1-ch; PWM Drive: n/a; Package: SIP9; RoHS Compatible: yes
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 20V (25V); Io (lpeak): 0.4A (1.2A); Channel: 1-ch; PWM Drive: n/a; Package: HSOP16; RoHS Compatible: yes
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 18V (25V); Io (lpeak): 1A (3A); Channel: 1-ch; PWM Drive: n/a; Package: HSIP7; RoHS Compatible: yes‡
Series Regulators; Surface Mount Type: Y; Package: New PW-MOLD; Number Of Pins: 3; Polarity: Positive; General Description: Three-Terminal Voltage Regulator; Features: Medium current output; Note: Surface-mount PW-MOLD package 逻辑IC
Logic IC 逻辑IC
|
Bourns, Inc.
Thomas
|
