| PART |
Description |
Maker |
| HDMI2C1-14HDS |
HPD pull down and signal conditioning
|
STMicroelectronics
|
| PI3VDP411LST PI3VDP411LSTZDE |
Digital Video Level Shifter for dual mode DP signals w/ inverting buffer for HPD signal
|
Pericom Semiconductor Corporation
|
| H8236-07 H8236-40 |
HPD (HYBRID PHOTO-DETECTOR) MODULES
|
Hamamatsu Photonics
HAMAMATSU[Hamamatsu Corporation]
|
| MAX14998ETOT MAX14998 MAX4998 |
Two-Lane and Four-Lane DisplayPort Passive Switches with Separate AUX/HPD Control
|
Maxim Integrated Products
|
| MMBZ5230BL MMBZ5230BLT1 MMBZ5254BL MMBZ5263BL MMBZ |
Small Signal 4.7V 5%
Small Signal 27V 5%
56V Zener
Small Signal 33V 5%
Small Signal 12V 5%
Small Signal 13V 5%
Small Signal 15V 5%
Small Signal 20V 5%
|
ON Semiconductor
|
| MMBZ5230BLT3 MMBZ5224BL MMBZ5224BLT1 MMBZ5221BL MM |
Small Signal 4.7V 5%
Zener 2.8V
2.4V Zener
Small Signal 27V 5%
Zener 43V 5%
Zener 47V 5%
51V Zener
Zener 62V 5%
60V Zener
Small Signal 6.8V 5%
Small Signal 25V 5%
Small Signal 9.1V 5%
Zener Voltage Regulator 30V 5%
Small Signal 16V 5%
Small Signal Zener 36V 5%
Small Signal 20V 5%
|
ON Semiconductor
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| 45912-0034 0459120034 |
12.90mm (.508) Pitch EXTreme PowerEdge? Mixed Power/Signal Card Edge Connector, Double Sided, 4 Segments (Signal, Power, Signal, Signal Sequence), Press-Fit
|
Molex Electronics Ltd.
|
| AN53 AN5302K |
From old datasheet system
The CS5322 Digital Filter
NTSC LUMINANCE SIGNAL/ CHROMA-SIGNAL AND SYNCHRONOUS SIGNAL PROCESSING ICs
|
List of Unclassifed Manufacturers
ETC[ETC]
Electronic Theatre Controls, Inc.
Panasonic Semiconductor
|
| 0459110011 45911-0011 |
12.90mm (.508) Pitch EXTreme PowerEdge? Mixed Power/Signal Card Edge Connector, Double Sided, 3 Segments (Signal, Signal, Power Sequence)
|
Molex Electronics Ltd.
|
| SGM8704 |
Push-Pull Output Comparator
|
Shengbang Microelectron...
|
