| PART |
Description |
Maker |
| REL-IR-4L-24AC |
Plug-in industrial relay with power contacts and additional hard gold plating, 4 PDTs, test button, status LED, mechanical switch setting display, coil voltage: 24 V AC
|
PHOENIX CONTACT
|
| REL-IR2 |
Plug-in industrial relay with power contacts, 2 changeover contacts, test key, mechanical switch position indicator, polarity: bipolar, input voltage: 24 V DC
|
PHOENIX CONTACT
|
| 2-1393117-0 2-1419106-5 KUP-11D11-24 KUP-11D35-24 |
General Purpose Relays Industrial Relays
KUP Series Panel Plug-in Relay
Wide selection of termination and mounting styles
|
Tyco Electronics
TE Connectivity Ltd
|
| RIF-4-RPT-LV-120AC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket.
|
PHOENIX CONTACT
|
| RIF-2-RSC-LV-120AC |
Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket.
|
PHOENIX CONTACT
|
| NUD3112LT1 NUD3112LT1G NUD3112DMT1 NUD3124LT1 |
12 V Industrial Relay / Inductive Load Driver
24V Automotive Relay Driver
|
ON Semiconductor
|
| HT95A200/20P HT95A300/30P HT95AXXX HT95A100 HT95A1 |
I/O Type Phone 8-Bit MCU I / O型电位微控制
Time-Delay Relay; Contacts:DPDT; Time Range:0.1 sec. to 6 sec.; Mounting Type:Plug In; Relay Mounting:Plug-In; Supply Voltage:24VDC I / O型电位微控制
|
http://
Holtek Semiconductor, Inc.
Holtek Semiconductor Inc.
|
| BS616LV2015 BS616LV2015TI BS616LV2015AC BS616LV201 |
Very Low Power/Voltage CMOS SRAM 128K X 16 bit
Plug-In Relay; Contacts:SPST-NO; Contact Carry Current:30A; Coil Voltage AC Max:24V; Relay Mounting:Plug-In; Relay Terminals:Screw; Coil Resistance:11.5ohm; Coil Power VAC:9.5VA RoHS Compliant: Yes 非常低功电压CMOS SRAM28K的16
Very Low Power/Voltage CMOS SRAM 128K X 16 bit 非常低功电压CMOS SRAM28K的16
|
BRILLIANCE SEMICONDUCTOR, INC.
BSI[Brilliance Semiconductor]
Brilliance Semiconducto...
|
| HP4-AC115V HP4-AC220V HP4-DC110V HP4-L-AC115V HP4- |
HP-relay. 10 Amp power relay. 4 form C. Coil voltage 115 V AC. Standard plug-in terminal type (without lamp wired).
HP-relay. 10 Amp power relay. 4 form C. Coil voltage 220 V AC. Standard plug-in terminal type (without lamp wired).
HP-relay. 10 Amp power relay. 4 form C. Coil voltage 110 V DC. Standard plug-in terminal type (without lamp wired).
HP-relay. 10 Amp power relay. 4 form C, neon lamp. Coil voltage 115 V AC. Standard plug-in terminal type (without lamp wired).
HP-relay. 10 Amp power relay. 4 form C, neon lamp. Coil voltage 220 V AC. Standard plug-in terminal type (without lamp wired).
HP-relay. 10 Amp power relay. 4 form C, neon lamp. Coil voltage 240 V AC. Standard plug-in terminal type (without lamp wired).
HP-relay. 10 Amp power relay. 2 form C. Coil voltage 110 V DC. Top mounting type.
HP-relay. 10 Amp power relay. 2 form C. Coil voltage 220 V AC. Top mounting type.
HP-relay. 10 Amp power relay. 2 form C. Coil voltage 240 V AC. Top mounting type.
|
Matsushita Electric Works(Nais)
|
| C-2008614 |
PLUG KIT SHIELDED INDUSTRIAL CIRCULAR ETHERNET CONNECTOR
|
Tyco Electronics
|
