| PART |
Description |
Maker |
| PTZTE2515B |
Small power mold type. (PMDS)
|
Rohm
|
| 5P6SMA 5P4SMA |
5A mold isolated SCR
From old datasheet system
P gate all Diffused mold type Thyristor granted 5 A on-state Average current, with rated Voltages up to 600V
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| PS21997-4 PS21997-4A PS21997-4C PS21997-4W |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21964-T09 PS21964-CT PS21964-TW |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21204 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| PS21961-AT PS21961-CT PS21961-T PS21961-TW |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| UPA828 UPA828TF UPA828TF-T1 |
HIGH-FREQUENCY LOW-NOISE AMPLIFIER NPN SILICON EPITAXIAL TWIN TRANSISTOR WITH BUILT-IN 6-PIN 2 x 2SC5184 THIN-TYPE SMALL MINI MOLD
|
NEC[NEC]
|
| SI-8050S SI-8150S SI-8000S SI-8090S SI-8120S SI-80 |
3 A SWITCHING REGULATOR, 60 kHz SWITCHING FREQ-MAX, PSFM5
Full-Mold Separate Excitation Switching Type
Full-Mold, Separate Excitation Switching Type
Full-Mold/ Separate Excitation Switching Type
|
SANKEN[Sanken electric]
|
| KB161M-20 |
Power mold type, High reliability
|
TY Semiconductor Co., Ltd
|
| RPI-221 |
Sensors > Photointerrupters > Linear Phototransistor output
Photointerrupter, double-layer mold type
Photointerrupter/ double-layer mold type
|
Rohm CO.,LTD.
|
| 03P2J 03P4J 03P5J |
ALL DIFFUSED TYPE SCR POWER MINI MOLD
|
NEC Corp.
NEC[NEC]
|
