| PART |
Description |
Maker |
| RE030 |
1.75V to 2.1V. rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated with other analog cells
RE030 is a dual mode Low Drop Out (LDO) voltage regulator macrocell with programmable output voltage ranging from 1.75V to 2.1V, rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated wi
|
Atmel
|
| FAN6920MR FAN6920MRMY |
Integrated Critical-Mode PFC and Quasi-Resonant Current-Mode PWM Controller
|
Fairchild Semiconductor
|
| AA-1280-2 |
compact, single phase, device with very good common mode and differential mode insertion loss
|
JMK Inc.
|
| MB82DBS02163E-70L |
32 Mbit Mobile FCRAM 1.8 V, Burst Mode & Page Mode
|
Fujitsu Limited
Fujitsu Component Limited.
Fujitsu Media Devices Limited
|
| SMB339 SMB329 |
Programmable Switch-mode, Li Battery Chargers with TurboCharge Mode
|
Summit Microelectronics, Inc.
|
| UPD23C64380F9-XXX-BC3 UPD23C64340 UPD23C64340F9-BC |
64M-BIT MASK-PROGRAMMABLE ROM 8M-WORD BY 8-BIT (BYTE MODE) / 4M-WORD BY 16-BIT (WORD MODE) PAGE ACCESS MODE
|
NEC[NEC]
|
| SI-8205NHD11 |
Surface-Mount, Current Mode Control, Synchronous Rectifier Step-down Switching Mode Regulator ICs
|
http://
|
| SC16C852LIET SC16C852LIB |
1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode bus interface
|
NXP Semiconductors
|
| MX25L4006EM1I-12G MX25L4006EM2I-12G MX25L4006EPI-1 |
Serial Peripheral Interface compatible --Mode 0 and Mode 3
|
Macronix International
|
| 0283 KK-0283-30M KK-0283-20M |
The 283 filter is a compact, single phase, high current device with very good common mode and differential mode insertion loss.
|
JMK Inc.
http://
|
