| PART |
Description |
Maker |
| IRS2301 IRS2301SPBF IRS2301STRPBF |
Floating channel designed for bootstrap operation
|
International Rectifier
|
| IRS21867SPBF |
HIGH AND LOW SIDE DRIVER
Floating channel designed for bootstrap operation
|
International Rectifier
|
| AUIRS2004S AUIRS2004STR AUIRS2004S-15 |
Automotive Grade HALF-BRIDGE DRIVER IC Undervoltage lockout
Floating channel designed for bootstrap operation
|
International Rectifier
|
| C1206Y103K5RACTU |
Ceramic, Floating Electrode, FloatingFlexTerm-(CxxxxY), 0.01 uF, 10%, 50 V, 1206, X7R, SMD, MLCC, FF-CAP, Floating Electrode
|
Kemet Corporation
|
| REC-14LA REC-16LA |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
| PT2323 |
6-Channel Audio Selector Utilizing CMOS Technology Specially Designed
|
Princeton Technology
|
| T6340A T6505A T6505A-ADG T6505A-AEG T6505A-BDG T65 |
T6340A provides the low-dropout bias supply and the high performance alternative solution for the white LEDs application.
T6505A is designed for LED displays.
The T6506A is a 3-channel constant current LED drivers.
16-channel Constant Current LED Driver with LVDS Interface
24-channel LED Driver with LVDS Interface
16-channel LED Driver with LVDS Interface
24-channel Constant Current LED Driver with LVDS Interface
The T8601 is a low cost, simple, high-efficiency off-line LED driver IC.
The T8611 is a simple, high voltage, linear current regulator.
The T6331A are integrated, high-efficiency white or RGB LED drivers.
The T6322A is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.
The T6333A is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.
|
Taiwan Memory Technology
THine Electronics, Inc.
|
| LA47503 |
29 W, 4 CHANNEL, AUDIO AMPLIFIER, PZFM25
Car stereo BTL 4-channel (50 W x 4) power amplifier IC, version designed to resist noise from power mirrors
|
Sanyo Semiconductor
|
| P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available
Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
| A4933 |
The A4933 is a 3-phase controller for use with N-channel external power MOSFETs and is specifically designed for automotive applications.
|
Allegro MicroSystems
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| 2N4416A |
SMALL SIGNAL N-CHANNEL J-FET THAT IS DESIGNED TO PROVIDE HIGH PERFORMANCE AMPLIFICATION AT HIGH FREQUENCIES
|
Seme LAB
|
