PART |
Description |
Maker |
89177-6030 89177-6011 |
Edge Connector,PCB Mnt,RECEPT,120 Contacts,0.05 Pitch,PC TAIL Terminal 120 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER ASSY 1.27 EDGE CONN CARD 120 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
|
Molex, Inc.
|
50-10A-20 50-12B-10 |
Card Edge Connector; Contact Termination:Solder; Leaded Process Compatible:Yes RoHS Compliant: Yes SINGLE PART CARD EDGE CONN
|
Cinch Connectors
|
U74LVC574L-P20-R U74LVC574L-R20-R U74LVC574L-S20-R |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS LVC/LCX/Z SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO20
|
UNISONIC TECHNOLOGIES CO LTD
|
74AUP1G80GW 74AUP1G80GM 74AUP1G80GN |
Low-power D-type flip-flop; positive edge trigger 低功耗D型触发器;上升沿触 Low-power D-type flip-flop; positive edge trigger AUP/ULP/V SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, INVERTED OUTPUT, PDSO6
|
NXP Semiconductors N.V.
|
650090-7 |
.050 Centerline Card Edge Connectors (Standard Edge .050 and Press-Fit Connectors); AMP .050C/L CEC 23 DUAL POS ( AMP )
|
Tyco Electronics
|
74LV574 74LV574_2 74LV574D 74LV574PWDH 74LV574DB 7 |
positive edge-trigger (3-State) From old datasheet system Octal D-type flip-flop; positive edge-trigger 3-State
|
PHILIPS[Philips Semiconductors] NXP Semiconductors
|
74LV109 74LV109D 74LV109DB 74LV109N 74LV109PW 74LV |
Dual JK flip-flop with set and reset; positive-edge trigger LV/LV-A/LVX/H SERIES, DUAL POSITIVE EDGE TRIGGERED J-KBAR FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO16 From old datasheet system
|
NXP Semiconductors N.V. PHILIPS[Philips Semiconductors]
|
74ABT821 74ABT821D 74ABT821DB 74ABT821N 74ABT821PW |
positive-edge trigger (3-State) 10-bit D-type flip-flop; positive-edge trigger 3-State
|
PHILIPS[Philips Semiconductors] NXP Semiconductors N.V.
|
NE2004VA10A A5800562 NE2004-VA10A |
Near edge thin film thermal printhead (8 dots / mm) From old datasheet system Near edge thin film thermal printhead (8 dot/mm) Thermal Printheads > Fro Plastic Card > NE200*-, 300*-VA@ Series
|
Rohm CO.,LTD. ROHM[Rohm]
|
HCTS374T HCTS374KTR HCTS374DTR |
Dual Positive-Edge-Triggered D-type Flip-Flops With Clear And Preset 20-LCCC -55 to 125 1024 x 18 Synchronous FIFO Memory 68-CPGA -55 to 125 Radiation Hardened Octal D-Type Flip-Flop, Three-State, Positive Edge Triggered
|
Intersil Corporation
|
74ALS109AN 74ALS109A 74ALS109AD |
Dual J-K positive edge-triggered flip-flop with set and reset ALS SERIES, DUAL POSITIVE EDGE TRIGGERED J-KBAR FLIP-FLOP, COMPLEMENTARY OUTPUT, PDIP16
|
Rochester Electronics, LLC PHILIPS[Philips Semiconductors] NXP Semiconductors
|