| PART |
Description |
Maker |
| KDZTR24B |
Small power mold type.
|
Rohm
|
| 5P6SMA 5P4SMA |
5A mold isolated SCR
From old datasheet system
P gate all Diffused mold type Thyristor granted 5 A on-state Average current, with rated Voltages up to 600V
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| PS21965-AT PS21965-CT PS21965-TW PS21965-T09 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21993-4 PS21993-4A PS21993-4C PS21993-4W |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21994-4 PS21994-4A PS21994-4C PS21994-4W PS21994 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21963-ET09 PS21963-AET PS21963-CET PS21963-ET PS |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21961-ST |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| UPA828 UPA828TF UPA828TF-T1 |
HIGH-FREQUENCY LOW-NOISE AMPLIFIER NPN SILICON EPITAXIAL TWIN TRANSISTOR WITH BUILT-IN 6-PIN 2 x 2SC5184 THIN-TYPE SMALL MINI MOLD
|
NEC[NEC]
|
| NNCD6.8RH NNCD6.8RH-T1 NNCD6.8RH-T2 |
ESD noise clipping diode 5pin SC-88A low capacitance
LOW CAPACITANCE TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE (QUARTO TYPE: COMMON ANODE) 5-PIN SUPER SMALL MINI MOLD 低电容式静电放电噪声裁剪二极管（四开型：共阳极）5引脚超小微型模具
|
NEC[NEC]
NEC Corp.
NEC, Corp.
|
| NNCD5.1F NNCD5.6F NNCD6.2F NNCD6.8F NNCD4.3F NNCD4 |
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE, ANODE COMMON 3PIN MINI MOLD 静电放电二极管双噪音裁剪式，阳极通用3针迷你模
RES 309-OHM 0.5% 0.10W 25PPM THIN-FILM SMD-0805 TR-7-PA ROHS
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE / ANODE COMMON 3PIN MINI MOLD
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE ANODE COMMON 3PIN MINI MOLD
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
