PART |
Description |
Maker |
MM1095 |
System Reset (with built-in watchdog timer
|
Mitsumi
|
MM1136 |
IC for System Reset (with built-in watchdog timer) Monolithic IC
|
MITSUMI[Mitsumi Electronics, Corp.]
|
MM1035XF |
System Reset (with built-in watchdog timer) Monolithic IC 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8
|
MITSUMI ELECTRIC CO., LTD.
|
MM1096BD MM1096BS MM1096B MM1096BF MM1096AF MM1096 |
System Reset (with built-in watchdog timer) Monolithic MM1096 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PSIP8
|
MITSUMI ELECTRIC CO., LTD. Mitsumi Electronics, Corp.
|
DTA143ZE DTA143ZKA DTA143ZSA DTA143ZUA A5800431 |
Digital Transistor(Built in Resistor) From old datasheet system Digital transistors (built-in resistors)
|
Rohm CO.,LTD.
|
TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶??????? IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
TC9237BN TC9237BF E005440 |
MODULATION SYSTEM DA CONVERTER WITH BUILT-IN DIGITAL FILTER From old datasheet system
|
Toshiba
|
MAX801 MAX801CPA MAX801CSA MAX801EPA MAX801ESA MAX |
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog. Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog. Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. CMOS RAM write protection.. 8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy 8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy 8-Pin μP Supervisory Circuits with ±1.5eset Accuracy 8-Pin P Supervisory Circuits with 1.5eset Accuracy From old datasheet system 8-Pin レP Supervisory Circuits with 【1.5eset Accuracy 5015 RR 3#8 SKT RECP 8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚レP监控电路与精度1.5eset 8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚微处理器监控电路,提amp;plusmn;1.5%的复位门限精 Interface IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8 Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog. Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection..
|
MAXIM - Dallas Semiconductor MAXIM[Maxim Integrated Products] Maxim Integrated Products, Inc.
|
S24022SBT S24023SBT S24023P2.7T |
Precision RESET controller and 2K I2C memory with both RESET and non-RESET outputs
|
SUMMIT Microelectronics
|
S24023SAT S24023SBT S24023S2.7 S24023S2.7T S24023S |
Precision RESET Controller and 4K I2C Memory With Both RESET and RESET Outputs
|
Summit Microelectronics, In... SUMMIT[Summit Microelectronics, Inc.]
|
MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3 The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d CPU / System Supervisors Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology] Microchip Technology Inc. Microchip Technology, Inc.
|