| PART |
Description |
Maker |
| 611-0600-01 611-0700-01 611-0800-01 611-0500-01 61 |
STECKER DIN STANDARD SW 6POL AV
Low-Power, Single/Dual-Voltage µP Reset Circuits with Capacitor-Adjustable Reset Timeout Delay
STECKER DIN STANDARD SW 5POL 60GRAD
STECKER DIN STANDARD SW 4POL
STECKER DIN STANDARD SW 8POL STECKER DIN标准西南8POL
|
SCHURTER AG
|
| 86092325113745000E 8609XXX51137X5 86092645113785EL |
DIN STANDARD HEADER(ANGLED SPILL DIN 41612 STYLE-B)
|
http://
FCI-CONNECTOR[FCI connector]
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| HOA6961P51 HOA6962P55 HOA6965P55 HOA6960P51 HOA696 |
Compliant to DIN standard, Compliant to IEC603-2/DIN41612 standard; HRS No: 583-0137-3 77
|
Integrated Device Technology, Inc.
|
| SD-80 SD-81 |
SERIES: SD DESCRIPTION: STANDARD DIN CONNECTOR
STANDARD DIN CONNECTOR
|
CUI INC
|
| 86094327313745000E 86094327313745ELF 8609432731375 |
DIN STANDARD HEADER(ANGLED SPILL DIN41612 STYLE-C/2)
|
http://
FCI connector
|
| PPS-CLASSIC-M |
Profile cutter, for cutting and stamping holes in standard DIN rails
|
PHOENIX CONTACT
|
| 90170-0040 0901700040 |
2.54mm (.100) Pitch QF-50? Strain Relief, DIN 41651, Standard Low Profile, 40 Circuits
|
Molex Electronics Ltd.
|
| 0901700010 90170-0010 |
2.54mm (.100) Pitch QF-50?? Strain Relief, DIN 41651, Standard Low Profile, 10 Circuits
2.54mm (.100) Pitch QF-50? Strain Relief, DIN 41651, Standard Low Profile, 10 Circuits
|
Molex Electronics Ltd.
|
| 0901700030 90170-0030 |
2.54mm (.100) Pitch QF-50?? Strain Relief, DIN 41651, Standard Low Profile, 30 Circuits
2.54mm (.100) Pitch QF-50? Strain Relief, DIN 41651, Standard Low Profile, 30 Circuits
|
Molex Electronics Ltd.
|
| MCP2510-I/P MCP2510-I/SO MCP2510-E/P MCP2510-E/SO |
The MCP2510 18-pin stand-alone CAN (Control Area Network) controller features an industry standard SPI serial interface, enabling ...
|
Microchip
|
