| PART |
Description |
Maker |
| MT3A-1233SI MT3A-1215WI MT3A-2433SI MT3A-0533SI MT |
All specifications are typical at nominal input, full load and 25oC otherwise noted
|
Volgen Kaga Electronics Inc.
|
| DR1P5-05D05 DR1P5-05D12 DR1P5-05D15 DR1P5-05S05 DR |
All specifications are typical at nominal input, full load and 25C otherwise noted
|
RSG Electronic Components GmbH
|
| MPX200GVSX MPX200ASX MPX200D MPX200DP MPX200GP MPX |
0 to 200 kPa (0-29 psi) 60 mV FULL SCALE SPAN (TYPICAL) 000千帕-29 PSI）的60压全尺寸跨度（典型）
0 to 200 kPa (0-29 psi) 60 mV FULL SCALE SPAN (TYPICAL) GAGE, PEIZORESISTIVE PRESSURE SENSOR, 0-29Psi, 0.25%, 20-80mV, THROUGH HOLE MOUNT
|
Motorola Mobility Holdings, Inc.
Motorola, Inc.
MOTOROLA[Motorola, Inc]
http://
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| MCP603T-E/ST MCP603T-I/ST MCP6022-I/SN MCP6022-I/S |
MCP603 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 ...
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP604 quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. ...
|
Microchip
|
| SM08472350 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM08502390 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM08103370 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM08473410 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM08202350 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM06503410 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
