| PART |
Description |
Maker |
| AQY221R2SX AQY221R2SZ |
PhotoMOS relay, RF (radio frequency). 1 form A, R 10 type. Output rating: load voltage 40 V, load current 250 mA.
|
Matsushita Electric Works(Nais)
|
| NCP45540 |
NCP45540 Datasheet - ecoSWITCH™ Advanced Load Management: 18 A Controlled Load Switch with Low R<sub>ON</sub>
|
ON Semiconductor
|
| NCP45524 |
ecoSWITCH Advanced Load Management: 6A Integrated Load Switch w/ Ultra-Low R<sub>ON</sub>, V<sub>IN</sub> Range= 0.5V-13.5V, Power Good Out or Adj. Slew Rate, Adj. Discharge
|
ON Semiconductor
|
| AQV414AX |
PhotoMOS relay, GU (general use) type [1-channel (form B) type]. AC/DC type. I/O isolation: 1.500 V AC. Output rating: load voltage 400 V, load current 120 mA. Surface-mount terminal, tape and reel packing style, picked from the 1/2/3-pin
|
Matsushita Electric Works(Nais)
|
| NCP45520 |
NCP45520 & NCP45521 Datasheet - ecoSWITCH Advanced Load Management: 11.5A Integrated Load Switch w/ Ultra-Low R<sub>ON</sub>, V<sub>IN</sub> Range= 0.5V-13.5V, Power Good Out or Adj. Slew Rate, Adj. Discharge, & Fault Protection
|
ON Semiconductor
|
| WD101 WD105 WD200 WD102 WD506 WD100 WD103 WD104 WD |
DC/DC Converters
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 20 mA(no load), 543 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 20 mA(no load), 543 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
|
List of Unclassifed Man...
International Power Sources
ETC[ETC]
List of Unclassifed Manufacturers
|
| MAX1044 MAX1044CPA MAX1044CSA MAX1044EPA MAX1044ES |
From old datasheet system
Analog IC - Datasheet Reference
Switched-Capacitor Voltage Converters
Apem Components Inc Micro Limit Switches, Contact Rating: 16 A/250 VAC (resistive load), 4 A/250 VAC (motor load), Contact Type: SPST-NO, Actuator: Roller Lever, Contact: Nickel Silver
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maixm
Maxim Integrated Products Inc
Maxim Integrated Products, Inc.
|
| MAX1662 MAX1663 MAX1661-MAX1663 MAX1661 MAX1661EUB |
TRIPLE MOSFET DRIVER|BICMOS|TSSOP|10PIN|PLASTIC SWITCHING CONTROLLER, PDSO10
Serial-to-Parallel/Parallel-to-Serial Converters and Load-Switch Controllers with SMBus Interface
Serial to Parallel Parallel to Serial Converters and Load Switch Controllers with SMBus Interface
Serial-parallel/parallel-to-serial converter and load-switch controller with SMBus interface
|
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
Maixm
MAXIM - Dallas Semiconductor
|
| PS7112-1A PS7112L PS7112L-1A PS7112L-1A-E3 PS7112L |
6-PIN DIP, 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET 6引脚DIP00毫安的连续负载电1通道光学耦合场效应晶体管
Coaxial Cable; Coaxial RG/U Type:174; Impedance:50ohm; Conductor Size AWG:26; No. Strands x Strand Size:7 x 34; Jacket Material:Polyvinylchloride (PVC); Leaded Process Compatible:Yes; Voltage Nom.:300V RoHS Compliant: Yes
Solid State Relay(固态继电器)
6-PIN DIP / 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
6-PIN DIP 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
| AQV210EAX AQV210EHAX AQV214EAX |
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: standard 1,500 VAC. Output rating: load voltage 350V, load current 130 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: reinforced 5,000 VAC. Output rating: load voltage 350V, load current 130 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: standard 1,500 VAC. Output rating: load voltage 400V, load current 120 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
|
Matsushita Electric Works(Nais)
|
| AQW454 AQW454AZ AQW454A AQW454AX |
PhotoMOS relay, HE (high-function economy) [2-channel (form B) type]. AC/DC type. Output rating: load voltage 400 V, load current 120 mA. Surface mount terminal. Picked from the 5/6/7/8-pin side.
PhotoMOS relay, HE (high-function economy) [2-channel (form B) type]. AC/DC type. Output rating: load voltage 400 V, load current 120 mA. Surface mount terminal. Picked from the 1/2/3/4-pin side.
PhotoMOS relay, HE (high-function economy) [2-channel (form B) type]. AC/DC type. Output rating: load voltage 400 V, load current 120 mA. Through hole terminal.
HE (High-function Economy) Type [2-Channel (Form B) Type] 他（高功能经济）类型[2通道（表B）型]
|
Matsushita Electric Works(Nais)
NAIS[Nais(Matsushita Electric Works)]
Panasonic, Corp.
|
|
