| PART |
Description |
Maker |
| HL1-HP-DC24V HL1-HTM-AC240V |
Relay for control panel of 1c 15A, and 2c 10A
TYPICAL APPLICATIONS
|
Panasonic Semiconductor
|
| C4650A1 C4650 C465005 |
TYPICAL APPLICATIONS
BASE STATIONS TEST EQUIPMENT SYNTHESIZERS DIGITAL SWITCHING
|
VECTRON[Vectron International, Inc]
|
| BGA318 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz)
|
Siemens Semiconductor Group
|
| MPX10GP MPX10GVP MPX10 MPX10D MPX10DP MPX10GS MPX1 |
0 to 10 kPa (0-1.45 psi) 35 mV FULL SCALE SPAN (TYPICAL) 00千帕-1.45 PSI）的35压全尺寸跨度（典型）
0 to 10 kPa (0-1.45 psi) 35 mV FULL SCALE SPAN (TYPICAL) GAGE, PEIZORESISTIVE PRESSURE SENSOR, 0-1.45Psi, 1%, 20-80mV, THROUGH HOLE MOUNT
|
Motorola Mobility Holdings, Inc.
Motorola, Inc.
MOTOROLA[Motorola, Inc]
MOTOROLA[Motorola Inc]
|
| FMCE-0528 FMCE-0528-TR |
Attenuation to 60 dB at 500 kHz, typical Operating temperature -55掳 to 125掳C
Attenuation to 60 dB at 500 kHz, typical Operating temperature -55° to 125°C
|
Interpoint Corporation Company
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| TC1035ECH TC1034 TC1034ECT TC1035 TC1035ECHTR |
(TC1035) Single Operational Amplifiers in SOT Packages
Linear Building Block . Single Operational Amplifiers in SOT Packages
The TC1035 is a single CMOS operational amplifier for low-power applications. It has a typical operating supply current of 6 µA, ...
|
MICROCHIP[Microchip Technology]
|
| PCA1550B-LF |
PHASE NOISE (1 Hz BW, typical)
|
Z-Communications, Inc
|
| NTLJF3118N NTHD3100F NTMSD6N303 NTHD4N02 NTHD4P02 |
Typical Uses for FETKY Devices
|
ONSEMI[ON Semiconductor]
|
